AIRTHINGS 325 Corentium Home 2 Digital Radon Detector Instructions
- June 5, 2024
- Airthings
Table of Contents
AIRTHINGS 325 Corentium Home 2 Digital Radon Detector
Product Specifications
- Model: Corentium Home 2 (Model: 325)
- FCC ID: 2APPT-325
- IC: 23900-325
- Features: Bluetooth, SmartLink
Product Usage Instructions
Safety Precautions
Before using the Corentium Home 2, please read and understand all safety
instructions provided in the user manual.
Setup
- Place the device in a well-ventilated area away from direct sunlight.
- Insert batteries or connect to a power source using the provided cable.
- Follow the on-screen instructions to set up the device.
Usage
To monitor air quality:
- Ensure the device is powered on and connected to Bluetooth or SmartLink.
- View real-time air quality data on the device’s display or through the companion app.
- Take necessary actions based on the air quality readings provided.
Maintenance
Regularly check and replace batteries as needed. Clean the device with a
dry cloth to prevent dust buildup.
Frequently Asked Questions (FAQ)
-
Q: How often should I calibrate the Corentium Home 2?
A: The Corentium Home 2 is calibrated at the factory and does not require user calibration. However, it’s recommended to perform a self-check periodically. -
Q: Can I view historical data on the device?
A: Yes, you can access historical data through the companion app connected to the Corentium Home 2 -
Q: What is the range of Bluetooth connectivity?
A: The Bluetooth connectivity range of the Corentium Home 2 is approximately 30 feet under typical conditions.
Corentium Home 2 (Model: 325)
REGULATORY INFORMATION
- Regulatory information Canada
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with Innovation, Science and Economic Development Canada’s license- exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure safety. This product is a radio transmitter and receiver. It is
designed not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the ISED. The antenna must be installed and operated with a
minimum distance of 20 cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
CAN ICES-3 (B)/NMB-3(B)
This Class B digital apparatus complies with Canadian ICES-003
Regulatory information USA
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Class B device notice
. NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure safety. This product is a radio transmitter and receiver. It is
designed not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission. The antenna must be
installed and operated with a minimum distance of 20 cm between the radiator
and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
- Regulatory information EU
- Airthings products for sale in EU comply with EU Directives. The full text of the EU Declaration of Conformity is available upon request.
- Regulatory information UK
- Airthings products for sale in UK comply with UK Statutory Instruments. The full text of the UK Declaration of Conformity is available upon request.
General safety and maintenance ****
Airthings products are not intended for use at potentially hazardous areas such as at fuel depots, chemical plants and blasting sites. This product is intended for indoor use only. Avoid direct exposure to sunlight for long periods. Avoid exposure to direct heat sources. For correct usage, make sure the monitor is operating in the specified temperature range (see technical specifications for individual products). Exposure to high humidity might permanently alter the monitor sensitivity or damage it. Do not disassemble. If the monitor does not work as specified or you are in doubt, contact your local dealer or visit us at Airthings.com. Use a dry cloth to clean the monitor. When replacing the batteries, pay attention to the polarity marks. Always snap the mounting bracket to the monitor’s rear side to protect the batteries, even when the monitor is not permanently mounted. Disposal: electronic equipment.
Model Specifications
- Corentium Home 2 (Model: 325) has FCC ID: 2APPT-325, IC: 23900-325 and includes Bluetooth, and SmartLink.
- ISM Frequency Bands and Output Power
- Output power for Bluetooth and Thread is <5 mW
- Frequency Range and output power per region for SmartLink and other 50kbps-FSK protocols
- Europe, UK and UAE: 868 – 870 MHz, <25 mW North America: 902 – 928 MHz, <25 mW
Limited liability
- The instruments are tested and quality-assured by production. They meet the accuracy values set out in the specifications. It is recommended to keep the instruments constantly activated and the batteries in place until drained. Airthings ASA shall not be liable for damages related to failure or loss of data arising from incorrect operations and handling of the instruments.
- Terms & conditions can be found on airthings.com/terms-use-privacy/
- For additional questions go to support.airthings.com
- The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>