Hotpoint XAG95 Refrigerator Freezer Combination Instruction Manual

Hotpoint XAG95 Refrigerator Freezer Combination

Product Information

Specifications

• Model: XECO85
• Color: XXX
• Capacity: XX
• Appliance Type: Refrigerator/Freezer Combination

Description of the Appliance
The XECO85 is a refrigerator/freezer combination appliance with multiple compartments and features. It has a control panel with various buttons and indicators to adjust and monitor temperature settings. The appliance comes with levelling feet for stability and includes storage compartments, freezer compartments, fruit and vegetable bins, shelves, a wine rack, a lamp, and an extra zone compartment.

Control Panel
The control panel consists of the following elements:

1. ON/OFF button: Press this button for 2 seconds to turn on the entire appliance. Press it again to turn off the device. An audible signal will confirm the off commutation of the product.
2. FRIDGE temperature indicator: Displays the current temperature of the fridge compartment.
3. FRIDGE temperature setting: Allows you to change the temperature value of the fridge compartment in a cyclical way. It also confirms the selected temperature on the interface.
4. SUPER indicator light (rapid freezing): Illuminates when the SUPER button is pressed.
5. SUPER button (rapid freezing): Press this button to freeze fresh foods quickly. When pressed, the SUPER indicator light will illuminate.

Overall View
The appliance has the following components:

1. Levelling Feet: These feet help in adjusting and stabilizing the appliance.
2. Storage Compartment: Provides additional storage space for various items.
3. Freezer and Storage Compartment: This compartment is designed to store frozen food items.
4. Fruit and Vegetable Bin: A dedicated compartment for storing fruits and vegetables.
5. 3-in-1 Zone Compartment: A versatile compartment that can be used for different purposes.
6. Control Panel: The interface to control and monitor the appliance settings.
7. Wine Rack: Specifically designed to hold wine bottles securely.
8. Shelves: Adjustable shelves for organizing items.
9. Lamp: Provides illumination inside the appliance.
10. Extra Zone Compartment: An additional compartment for storing items separately.
11. Removable Multipurpose Shelves: Shelves that can be adjusted or removed as needed.
12. Bottle Shelf: A dedicated shelf to hold bottles securely.

Product Usage Instructions

Installation
To install the XECO85 refrigerator/freezer combination, follow these steps:

1. Select a suitable location with adequate ventilation and away from direct sunlight or heat sources.
2. Ensure the levelling feet are adjusted to stabilize the appliance.
3. Refer to the user manual for detailed installation instructions specific to your model.

Start-up and Use
To start using the appliance, follow these steps:

1. Ensure the appliance is properly installed and connected to the electricity or gas supply mentioned on the rating plate.
2. Press the ON/OFF button for 2 seconds to turn on the appliance. The current set value will be displayed on the interface.
3. Adjust the fridge temperature by using the FRIDGE temperature setting button. The selected temperature will be confirmed on the interface.
4. Press the SUPER button for rapid freezing of fresh foods. The SUPER indicator light will illuminate when activated.
5. Refer to the user manual for more details on using specific features and compartments of the appliance.

Maintenance and Care
To ensure proper maintenance and care of the XECO85 refrigerator/freezer combination, follow these guidelines:

1. Regularly clean the appliance using a mild detergent and a soft cloth.
2. Do not use abrasive cleaners or sharp objects that may damage the surface.
3. Keep the appliance’s interior clean and free from spills or food residues.
4. Check and replace any faulty or worn-out parts as recommended by the manufacturer.

Precautions and Tips
Follow these precautions and tips while using the XECO85 refrigerator/freezer combination:

1. Do not overload the appliance with excessive food items beyond its recommended capacity.
2. Avoid placing hot or warm items directly into the appliance. Allow them to cool down before storing.
3. Ensure proper ventilation around the appliance for efficient cooling.
4. Do not block the airflow vents or obstruct the movement of the doors.

Troubleshooting
If you encounter any issues with the XECO85 refrigerator/freezer combination, refer to the troubleshooting section in the user manual or contact our customer support for assistance.

FAQ

• What is the warranty period for the XECO85 appliance?
  The appliance comes with a 12 Months Parts and Labour Guarantee from the date of purchase.

• Can the XECO85 refrigerator/freezer combination be used in commercial premises?
  No, this appliance is intended for normal domestic purposes only and should not be used in commercial or non-domestic premises.

• Where can I find local repair engineers for the XECO85 appliance?
  For local repair engineers, please call 03448 111 606 (UK) or 0818 313 413 (ROI).

• How can I register my appliance for the 10-year parts guarantee?
  Please register your appliance at www.hotpointservice.co.uk and provide the required information, including the model number and serial number.

Product Guarantee and Repair Information

Guarantee
12 Months Parts and Labour Guarantee

• Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase.
• This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you:
• This guarantee is subject to the following conditions:
  • The appliance has been installed and operated correctly and in accordance with our operating and maintenance instructions.
  • The appliance is used only on the electricity or gas supply printed on the rating plate.
  • The appliance has been used for normal domestic purposes only.
  • The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by any person not authorised by us.
  • Any repair work must be undertaken by us or our appointed agent.
  • Any parts removed during repair work or any appliance that is replaced become our property.
  • The appliance is used in the United Kingdom or Republic of Ireland.
• The guarantee does not cover:
  • Damage resulting from transportation, improper use, neglect or interference or as a result of improper installation.
  • Replacement of any consumable item or accessory. These include but are not limited to: plugs, cables, batteries, light bulbs, fluorescent tubes and starters, covers and filters.
  • Replacement of any removable parts made of glass or plastic.
    THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR NON-DOMESTIC PREMISES.

Recycling and Disposal Information

• As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality, recycled components to keep down customer costs and minimise material wastage.
• Please dispose of packaging and old appliances carefully. To minimise the risk of injury to children, remove the door, plug, and cut the mains cable off flush with the appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged into mains socket, and the door cannot be locked shut.

Repairs and After Sales

• For product help and advice, repairs, spare parts or accessories, we’re here to help.
• For local repair engineers – 03448 111 606
• ROI – 0818 313 413
• UK standard local rate applies
• ROI local Irish rate applies
• For Parts and Accessories visit: parts.hotpoint.co.uk/shop
• Please remember to register your appliance at www.hotpointservice.co.uk to activate your 10 year parts guarantee.
• Please note, our advisors will require the following information: model number, serial number

Description of the appliance

Control panel

1. ON/OFF
   The whole product (both fridge and freezer compartments) can be turned on by pressing this button for 2 seconds. The last set value is indicated on the interface. Press this button to turn off the device. An audible signal will confirm the “off commutation of the product”.

2. FRIDGE temperature indicator
   It shows the temperature of the fridge compartment.

3. FRIDGE temperature setting
   It allows you to change the fridge temperature value, in a cyclical way; it also confirms the selected temperature on the interface.

4. SUPER indicator light (rapid freezing) illuminates when the SUPER button is pressed.

5. SUPER button (rapid freezing)
   To be used to freeze fresh foods. When it is pressed, the SUPER indicator light illuminates (see Start-up and use).

Overall view
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.

1. Levelling FEET
2. STORAGE compartment*
3. FREEZER and STORAGE compartment
4. FRUIT and VEGETABLE bin *
5. COMPARTMENT 3 IN 1 ZONE*
6. Control panel
7. WINE RACK *
8. SHELVES *
9. LAMP (see Maintenance).
10. COMPARTMENT EXTRA ZONE*
11. Removable multipurpose SHELVES *
12. BOTTLE shelf

• Varies by number and/or position, available only on certain models.

Installation

Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance.
Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.
4. Place the device far from heat sources (direct sun light, electric kitchen etc.)

Levelling

1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections
After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance,
• The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220- 240V).
• The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

NOTE

• Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only (see Assistance).
• The manufacturer declines any liability should these safety measures not be observed.
  Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.
  WARNING:
  THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:
When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug
If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

• The plug is replaced by a fused 13amp re-wireable plug bearing the BSI mark of approval.
  or

• The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

• Cut off and dispose of the supplied plug if it does not fit your socket.
• The cable should be cut as close as possible to the moulded plug.

Remove the fuse.
WARNING:
To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug
IMPORTANT:
WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE…

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

• Connect Green and Yellow wire to terminal marked ‘E’ or or coloured Green and Yellow.
• Connect Brown wire to terminal marked ‘L’ or coloured red or brown.
• Connect Blue wire to terminal marked ‘N’ or coloured Black or Blue.
  If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse.
  If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use. CE Marking certifies that this appliance conforms to the following EEC directives:
  Low Voltage Equipment – 73/23/EEC & 93/68 EEC
  Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

Start-up and use

Starting the appliance

• Before starting the appliance, follow the installation instructions (see Installation).
• Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate.
• Electronic versions are provided with a motor protection switch that powers on the compressor only almost 8 minutes after the starting. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).

1. Connect the plug and check that the FRIDGE TEMPERATURE indicator turns on. If the indicator stays off, please press the ON/OFF button.
2. Set the FRIDGE TEMPERATURE on an average value. After a few hours it will be possible to insert food in the fridge.

Cooling system

No Frost
The No Frost system circulates cold air continuously to collect humidity and prevent ice and frost formation. The system maintains an optimal humidity level in the compartment, preserving the original quality of the food, preventing the food from sticking together and making defrosting a thing of the past. Do not block the aeration cells by placing food or containers in direct contact with the refrigerating back panel. Close bottles and wrap food tightly.

Using the refrigerator to its full potential

• Place only cold or lukewarm foods in the compartment
• Remember that cooked foods do not last longer than raw foods.
• Do not store liquids in open containers: they will increase the level of humidity in the refrigerator and cause condensation to form.

SHELVES:
They are removable and adjustable in height and depth thanks to the special guides, allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. (see the picture)

TEMPERATURE Indicator light*: to identify the coldest area in the refrigerator.

1. Check that OK appears clearly on the indicator light (see diagram).

2. If the word “OK” does not appear it means that the temperature is too high:set the FRIDGE TEMPERATURE on a colder value, and then wait 10 hours until the temperature becomes stable.

3. Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10 hours before you set the FRIDGE temperature on a colder value.

**COMPARTMENT 3 IN 1 ZONE***

• This is the new box which offers maximum flexibility in order to stock your food in an excellent way.
  • store meat, fish and delicate food;
  • rapid cooling of hot food from 70°C to 3°C and of other fresh foods and leftovers
  • low temperature defrosting (it inhibits the proliferation of microorganisms).
• You can get the 0°C temperature, in standard conditions, when the fridge compartment temperature is at about 4°C.
• By decreasing the fridge temperature you decrease the CHILLER compartment temperature too.

Using the freezer to its full potential

• Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours).
• Fresh food for freezing should not be placed in contact with the one already frozen; it should be placed in the lower FREEZER and STORAGE compartment that provides the best freezing rate.
•  To freeze fresh food in the best and safest way possible, activate the SUPER function 24 hours before placing the food in the freezer. After placing the food inside, activate the SUPER function again; it will be deactivated automatically after 24 hours;
• Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break.
• The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: 2Kg/24h ).
  • To avoid blocking the air circulation inside the freezer compartment, it is advisable not to obstruct the ventilation holes with food or containers.
  • Do not open the door during freezing.
  • If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 12-18 hours.
  • To get more space inside your freezer, you can take out any drawers (and flaps, if appropriate), from their slots, by putting your food directly on the provided shelves.

Maintenance and care

Switching the appliance off
During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply:

1. Press the ON/OFF button to turn off the device
2. Pull the plug out of the socket

Cleaning the appliance

• The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

• The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.
• If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.

*Replace LED light**
The LED lighting, thanks to the powerful diffused light, allowes a clear view of each food. If you need to replace the LED light, contact theTechnical Service.

**Replacing the light bulb ***
To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover.

Precautions and tips

• The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.
• This appliance complies with the following Community Directives:
  • 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;
  • 89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments;
  • 2002/96/CE.

General safety

• The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.
• The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.
•  The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or moist hands and feet.
• Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.
• Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. -It is not enough to turn off the device (with the ON/OFF button) to eliminate all electric contacts.
• In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.
• Do not use any sharp or pointed utensils or electrical equipment – other than the type recommended by the manufacturer – inside the frozen food storage compartments.
• Do not put ice cubes taken directly from the freezer into your mouth.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack of experience and knowledge unless they have been given Supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be Supervised to ensure that they do not play with the appliance.
• Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

Disposal

• Observe local environmental standards when disposing packaging material for recycling purposes.
• The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

Respecting and conserving the environment

• Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources.
• Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy.
• Varies by number and/or position, available only on certain models.
• Do not fill the appliance with too much food: cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously.
• Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.
• Defrost the appliance if ice forms (see Maintenance). A thicklayer of ice makes cold transference to food products more difficult and results in increased energy consumption.

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

• The interface is off.
  The plug is not inserted in the outlet, or it is not powerful enough to create a contact, or there is no electricity in the house.

• The motor does not start.
  The appliance comes with a motor protection control (see

• Start-up and use).

  • The alarm sounds.
  • The refrigerator door has remained open for more than two minutes (the buzzer will stop sounding when you shut the door) or the correct switching-off procedure was not followed (see Maintenance).

• The refrigerator and the freezer do not cool well.

  • The doors do not close properly or the seals are damaged.
  • The doors are opened too frequently.
  • The FRIDGE TEMPERATURE is not correct (see Description).
  • The refrigerator or the freezer have been over-filled.

• The food inside the refrigerator is beginning to freeze.

  • The FRIDGE TEMPERATURE is not correct (see Description).
  • The food is in contact with the back inside wall of the refrigerator.

• The motor runs continuously.

  • The SUPER button was pressed: the yellow SUPER indicator is on (see Description).
  • The door is not closed properly or is continuously opened.
  • The outside ambient temperature is very high.

• The appliance makes a lot of noise.

  • The appliance has not been installed on a level surface (see Installation).
  • The appliance has been installed between cabinets that vibrate and make noise.
  • The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

• The back wall of the refrigerator unit is covered in frost or droplets of water
  This shows the appliance is operating normally.

INSTALLING HANDLES

References

• Manual-Hub.com - Free PDF manuals!
• Shop Kitchen and Laundry Appliances at Hotpoint - Hotpoint
• Official Hotpoint Appliance Service Repair - Hotpoint
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>