HANECO OXFORD12 Wide Body LED Batten Installation Guide

HAN ECO WIDE BODY LED BATTEN INSTALLATION GUIDE
OXFORD
Installation Guide

Thanks for choosing our OXFORD batten.
We strongly recommend that you read this manual carefully before installation.

Product Specifications

PRODUCT CODE| POWER| COLOUR TEMPERATURE| VOLTAGE/ FREQUENCY| PF| IP RATING| OPERATING TEMPERATURE| NET WEIGHT
---|---|---|---|---|---|---|---
OXFORD12| 40W I 20W| 4000K I 4700K I 5700 K| 220-240V 50/60Hz| >0.9| IP20| – 20-45°C| 3.55kg
OXFORD12-EM| 40W I 20W| 0-45°C| 3.85kg
OXFORD12-MS| 40W| – 20-45°C| 3.55kg
OXFORD12-EM-MS| 40W| 0-45°C| 3.85kg

• Product variants: Microwave sensor – MS, Emergency – EM

Installation Instructions

1. Switch-off main power.

2. Locate the installation holes positions and drill the holes on mounting surface.

3. Unlock the end caps on both ends.

4. Pull the end cap and remove the diffuser from the base.

5. Install the base onto desired location.

6. Wire the fitting as illustrated in the diagram below.

7. Select color temperature using the slide switch.
   | 4000K
   ---|---
   | 4700K
   | ( 5700K

8. Setup the lntellisensor using the DIP switch combinations below:
   For lntellisensor models, see attached leaflet for setup guide. Cowitch models go to step 9.

9. elect wattage using DIP switch combinations as shown below
   1| 2| lout (mA)| Pout (W)| Uout (V)
   ---|---|---|---|---
   | | 350| 20| 42-58
   | | 500| 29
   | | 550| 32
   | | 700| 40

IntelIisensor
Note:
1. “Os” means on/off control.
2.”+oe”means bi-level dimming control, fixture never switches off
3. Factory default setting: 100%. 1min 50Lux. 5min. 10%.

10. Install the diffuser
11. Lock end caps on both ends.
12. Switch-on main power.

WARNING
The luminaire must be installed by professional electrician.
Switch power off when wiring the luminaire.
Ensure input voltage conforms to the voltage range of product.
Ensure wires are securely connected.
Before switching on, ensure that all the wiring is correct.
The warranty is void if product is not installed according to the instructions.
Product Code:
OXFORD12
OXFORD12-EM
OXFORD12-MS
OXFORD12-EM-MS

ART05062019
For more information
www.haneco.com.au
1300 001 LED (533)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>