HANECO STAX200WG4 LED Flood Light Installation Guide
- May 15, 2024
- HANECO
Table of Contents
HANECO STAX200WG4 LED Flood Light
Product Specifications:
- Model: STAX200WG4
- Net Weight (kg): 2.6
- Power: 150/200W
- Color Temperature: 3000K/4000K/5000K
- Efficacy: 120lm/w @4000K
- CRI: >80
- Max. Mounting Height (m): 15
- Voltage/Frequency: 220-240Vac, 50/60Hz
Product Usage Instructions
Installation Guide:
- Carefully unpack the LED floodlight and all included components.
- Ensure the power supply is turned off before starting the installation process.
- Mount the floodlight securely at the desired location using appropriate fixtures.
- Connect the wires following the provided wiring diagram or consult a professional electrician.
- Adjust the angle of the floodlight to achieve the desired lighting coverage.
Maintenance:
- Regularly clean the fixture and lens to maintain optimal light output.
- Check for any loose connections or damage and address them promptly.
- Inspect the area around the floodlight for any obstructions that may affect its performance.
Troubleshooting:
If the LED floodlight is not functioning properly, check the power supply,
connections, and ensure the fixture is securely mounted. Refer to the user
manual for specific troubleshooting steps.
FAQ:
-
Q: What is the warranty period for this product?
A: The STAX G4 LED Floodlight comes with a 3-year warranty. -
Q: Can this floodlight be used in outdoor environments?
A: Yes, this LED floodlight has an IP66 rating, making it suitable for outdoor use. -
Q: What is the expected lifespan of the LED floodlight?
A: The floodlight has a lifespan of 50,000 hours under normal operating conditions.
HANECO LED FLOODLIGHT INSTALLATION GUIDE
STAXG4
Thanks for choosing our STAX G4 LED Floodlight products. We strongly
recommend that you read this manual carefully before installation.
WARNING
- The luminaire must be installed by professional electrician. Switch power of when wiring the luminaire. Ensure input voltage conforms to the voltage range of product. Ensure wires are securely connected. Before switching on, ensure that all the wiring is correct. The warranty is void if product is not installed according to the instructions.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
MODEL| POWER| Color temperature| Efficacy (lm/w)|
CRI| SDCM| Ambient temperature| Dimension (mm)
---|---|---|---|---|---|---|---
STAX200WG4| 150/200W| 3/4/5000K| 120lm/w @4000k| >80| <5| -20 to 45ºC|
33626635
Net Weight (kg)| Max. Mounting height (m)|
Max. Projected area (m²)
2.6| 15| 0.087
VOLTAGE/FREQUENCY 220-240Vac,50/60Hz
- IP66 Junction Box
- No supplied with product
- The terminal block should be complying with AS/NZS60998-2-1/IEC60998
Installation Instructions
- Turn of the power
- Mark wall with appropriate fixing position, loosen the nut to make the angle adjustments before installing the bracket with appropriately rated fixing hardware
- Adjust luminaire to the desired angle then tighten the nut to secure the angle.
- Connect luminaire to 240V main supply as per diagram.
- Turn on the power.
IMPORTANT
POWER selections MUST NOT be changed whilst the product is energised
- CCT adjustable DIP Switch
- Power adjustable DIP Switch
- For more information
- www.haneco.com.au
- 1300 001 LED
Last updated 15/08/23