SCANSTRUT SC-CW-7GT 15W Waterproof Wireless Charger Installation Guide

SCANSTRUT SC-CW-7GT 15W Waterproof Wireless Charger

Product Information

Specifications

• Model: WATERPROOF WIRELESS CHARGER SUB 3 COIL 15W
  SC-CW-7GT

• Part List:

  • Sub 3 Coil x1

• Tools Required: Jig Saw, File, Router, Calipers

• IP Waterproof Rating: IPX6 Front and back

• Input Voltage: 10-30V DC (12/24V System)

• Input Current Max: 2A

• Output Power Max: 15W (12V 1.25A)

Installation Instructions

1. Prepare the tools required: Jig Saw, File, Router, Calipers.
2. Identify the suitable location for installation.
3. Ensure the input voltage is within the specified range (10-30V DC).
4. Connect the wireless charger according to the provided wiring diagram.
5. Securely mount the charger using appropriate hardware.

Product Usage Instructions

1. Place your device on the wireless charger ensuring proper alignment with the coils.
2. The charger will start charging your device wirelessly once properly placed.
3. Avoid placing any metal objects between the device and thecharger.
4. To remove the device, simply lift it off the charger.
5. Disconnect the charger when not in use to prevent standby power consumption.

FAQ

• Q: What should I do if the wireless charger is not working?
  A: Check the input voltage, make sure the device is properly aligned on the charger, and ensure there are no metal obstructions between the device and the charger.

• Q: Is the wireless charger waterproof?
  A: Yes, the wireless charger has an IPX6 waterproof rating for both front and back protection.

WATERPROOF WIRELESS CHARGER SUB 3 COIL 15W SC-CW-7GT

22-08-2024 (Rev B)

Part List

Tools Required

Technical

Technical|
---|---
IP Waterproof Rating| IPX6 Front and back
Input voltage| 10-30V DC (12/24V System)
Input current max| 2A
Output power max| 15W (12V 1.25A)
Standby power max| <1.2W

Certification

| CE, UKCA, FCC, ROHS, C-Tick, UN ECE R10, E24, PSE Certified

READ THE IMPORTANT SAFETY INFORMATION LEAFLET BEFORE INSTALLING.

Installation Instructions

1. * Cut out template

   • Mark the cutting boundary
   • Use template to
   • Drill 4x ø6mm (0.24″)
   • Drill 4x ø10mm (0.39″)
2. • Jig saw inside of the cutting boundary. DO NOT exceed the boundary area.
   • File the cut out area to the boundary profile unitl the product fits.

3. (Optional)

   • Rout out or CNC the flange profile to a depth of 2.5 (0.1″) for a flush installation.
   • Use recess template as a guide.
4. • Clean mounting surface.
   • Remove self-adhesive back-ing.
   • Feed cable through hole.
   • Apply pressure on top of charger to secure.

5. (Optional)

   • Overlay your choice of non-metallic surface, including wood fabric or marine traction surface (Not Provided).
   • Maximum thickness ≤3mm.
6. • Connect wires or connectors to 12/24V supply, ensuring a waterproof connection.
   • Fuse according to input voltage and current.

White LED Constant : ON Charge
Red LED Constant: Standby (power ON)
Red LED Flashing :

Foreign object detection : metallic object placed on top that is not Qi compatible.
OR
Thermal cutout: The internal temperature is too high/ low. Wait for product to return to operating temperature.

UK & International
+44 (0)1392531280
sales@scanstrut.com

For further installation and warranty information please visit:
www.scanstrut.com

USA
+1 860 308 1416
usasales@scanstrut.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>