THERMALRIGHT SS110 T9300 Royal Knight 120 Se Installation Guide
- September 13, 2024
- THERMALRIGHT
Table of Contents
THERMALRIGHT SS110 T9300 Royal Knight 120 Se
Parts list
INSTALLATION
AMD AM4/AM5
- Remove the AMD original plastic support, keep the back plate, and lock it to the original motherboard base plate with the AM4 rubber column.
- Apply thermal compound on the CPU, install the heatsink with a screwdriver, and install fans on the heatsink with fan clips.
INTEL LGA115X/1200
- Adjust the backplate mounting hole position, install the backplate from the back side of the motherboard, place LGA115X/1200 standoffs from the front side, and install brackets with screws.
- Apply thermal compound on the CPU, install the heatsink with a screwdriver, and install fans on the heatsink with fan clips.
INTEL LGA1700/1851
- Adjust the backplate mounting hole position, install the backplate from the back side of the motherboard, place LGA1700 standoffs from the front side, and install brackets with screws.
- Apply thermal compound on the CPU, install the heatsink with a screwdriver, and install fans on the heatsink with fan clips.
Fan Wiring
- Insert a 4-pin PWM fan header in the CPU_FAN socket on the motherboard, and use Y-cablet to sync fan speed for dual fan setup.
- connect ARGB lighting header 3-pin +5V) to motherbong ARGB lighting socket or ARGB lighting controller,lighting effects can be synced by connecting fan lighting headers with each other
Please remove the protective sticker before installing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>