Jsonphx 2BBV3B1 Battery Camera User Manual
- June 15, 2024
- Jsonphx
Table of Contents
Battery Camera B1S
User Manual
2BBV3B1 Battery Camera
Note: Solar panel not included in B1L version.
Solar Panel Together with Cam
Solar Panel Separate with Cam
(Need extra wall mount)
Note:
If you need extra wall mount for solar panel, please feel free to contact us.
Warranty
30 days return policy and 24 months limited warranty. Timely customer service via [email protected] APP: Jsonphx Please search “Jsonphx” on Google Play or APP Store.
Further Support
Youtube@Jsonphx product setting guide video
https://www.youtube.com/channel/UCn0zJtoYAyBWqxOpyTC9onw
Facebook@Jsonphx support team instant after-sale support
https://www.facebook.com/qr/1198664257679593
How to setup
- Take out camera and charge for 30 minutes
- Download “jsonphx” app on Google Play or App Store and signup
- Turn on the Bluetooth of phone
- Connect phone to 2.4G Wi-Fi
- Sign in APP and Long press reset button for 3 seconds
- When spotlight flash, Click “+” to follow steps on the app to finish the connection
- Check the battery power available whether above 80%. if not, please charge camera to make sure battery power available above 80%
- Mount camera to anywhere you want
Tips: follow status may cause connection failed
- There are special characters in Wi-Fi password
- Length of Wi-Fi password above 20 characters
- Name of 2.4G Wi-Fi same with 5G Wi-Fi
If any problem, please contact our support team, we will provide support asap
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference o radio communications. However, there is no guarantee that
interference will not occurina particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’ s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
CE-RED
This product complies with the radio interference requirements of the
European Community Declaration of Conformity
Hereby. Jsonphx declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. For the
declaration of conformity, visit the Web: https://www.jsonphx.com
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a
USB interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily
accessible.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for -10°C~+50°C and accessories is 0°C-40°C. When
charging, please place the device in an environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C-25°C.
RF exposure information: The Maximum Permissible Exposure(MPE) level has been
calculated based on a distance of d=20cm between the device and the human
body. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body.
Wi-Fi Operating Frequency Range: 2412-2472MHz; Wi-Fi Max Output Power:
14.46dBm(ERIP)