THERMALRIGHT Assassim X 120 Series Refined SE CPU Air Cooler 4 Heat Pipes Installation Guide
- June 13, 2024
- THERMALRIGHT
Table of Contents
INSTALLATION GUIDE
Assassin X 120
Serieswww.thermalright.com
Parts list
AMD AM4
Remove plastic retention bracket,but keep the backplate;secure the
brackets using the AM4 screws.
Apply
a thin layer of thermal grease;and then secure heatsink.
INTEL LGA115X/1200
Install the INTEL back plate from the back of motherboard,then
place plastic standoffs from front side of motherboard, install INTEL metal
brackets with screws
Apply
a thin layer of thermal grease; and then seoure heatsink.
INTEL LGA2OXX
Thread in the LGA20XX screws;put on the brackets and then
tightterning with nuts.
Apply
a thin layer of thermal grease, and then secure heatsink.
INTEL LGA1700
Install the LGA1700 back plate from the back of motherboard,then
place plastic standoffs from front side of motherboard, install LGA1700 metal
brackrts with screws
Apply
a thin layer of thermal grease, and then seoure heatsink.
Fan wiring
Mount
the fan(s) with the fan clips, Using dual fan, the rubber pad is attached to
the radiator air outlet.
Insert 4-pin PWM fan header in CPU_FAN socket on motherboard, use Y-cablet to
sync fan speed for dual fan setup.
For
Fans with ARGB lighting,To control the ARGB lighting , connect ARGB lighting
header(3-pin +5V) to motherboard ARGB lighting socket or ARGB lighting
controller, lighting effects can be sync by connecting fan lighting headers
with each other.