THERMALRIGHT AK120 Assassin King 120 SE CPU Air Cooler Installation Guide
- June 14, 2024
- THERMALRIGHT
Table of Contents
THERMALRIGHT AK120 Assassin King 120 SE CPU Air Cooler
Parts List
AMD AM4
- REMOVE AMD AM4 plastic brackets, KEEP the back plate, install AM4 metal brackets with AM4 screws and AM4 plastic standoffs
- Apply thermal grease on the CPU, install the heatsink with a screwdriver, and install fans on the heatsink with fan clips
INTEL LGA115X/1200
- Install the LGAI 1 5X/1700 back plate from the back of motherboard, then place plastic standoffs from the front side of the motherboard, install LGAI 15X/1200 metal brackets with screws
- Apply thermal grease on CPU, install the heatsink with a screw driver, and install fans on heatsink with fan clips
INTEL LGAI 700
- Install the LGAI 15X/1700 back plate from the back of motherboard, then place plastic standoffs from the front side of the motherboard, install LGAI 700 metal brackets with screws
- Apply thermal grease on the CPU, install the heatsink with a screwdriver, and install fans on the heatsink with fan clips
Fan Wiring
- Insert 4-pin PWM fan header in CPU _ FAN socket on motherboard, use Y-cablet to sync fan speed for dual fan setup.
For Fans with ARGB lighting, To control the ARGB lighting, connect the ARGB
lighting header(3-pin +5V) to the motherboard ARGB lighting socket or ARGB
lighting controller, lighting effects can be sync by connecting fan lighting
headers with each other
www.thermalright.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>