THERMALRIGHT Spirit 120 EVO CPU Air Cooler Installation Guide
- June 13, 2024
- THERMALRIGHT
Table of Contents
THERMALRIGHT Spirit 120 EVO CPU Air Cooler Installation Guide
Installation Instruction
Please remove protective sticker before install
parts list
A : Heatsink x1
B : Fan x 2
C : Ymodel patch cord
D : INTEL Bracket x2
E : AM4/AM5 Bracket x2
F : FAN Clip x4
G : 115Xscrew bolt x4
H : LGA20XX Screw x4
I: Tightening Nut x4 AM4/AM5
J : Standoff x4 AM4/AM5
K : Screw x4
L : Thermal Greasa xl
M : 1700screw bolt x4
N : LGA115X/1700 Backplate x1
AMD AM4/AM5
Remove the AMD original plastic support, keep the back plate, and lock it to
the original motherboard base plate with AM4/AM5 rubber column
Apply the hot paste, lock the main body with a screwdriver, and fix the fan
with a fan wire
INTEL LGA115X/1200
Push the backplane to the LGA115x detent, and the corresponding hole position
of the main board passes through the main board, and then tighten the LGA115x
stud from the front Place the Intel bracket and fix it with screws
Apply the hot paste, lock the main body with a screwdriver, and fix the fan
with a fan wire
INTEL LGA2011/2066
Thread in the LGA20XX screws; put on the brackets and then tightening with
nuts.
Apply the hot paste, lock the main body with a screwdriver, and fix the fan
with a fan wire
INTEL LGA1700
Push the backplane to the LGA1700 detent, and the corresponding hole position
of the main board passes through the main board, and then tighten the LGA1700
stud from the front Place the Intel bracket and fix it with screws
Apply the hot paste, lock the main body with a screwdriver, and fix the fan
with a fan wire
Fan Wiring
Insert 4-pin PWM fan header in CPU FAN socket on motherboard, use Y- cablet to
sync fan speed for dual fan setup.
For Fans with ARGB lighting, To control the ARGB lighting connect ARGB
lighting header(3-pin +5V) to motherboard ARGB lighting socket or ARGB
lighting controller ,lighting effects can be sync by connecting fan lighting
headers with each other