LUXPRO LP459 Utility LED Flashlight with Area Light User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUXPRO LP459 Utility LED Flashlight with Area Light
Features
- Durable aluminum construction
- BROADBEAM surface LED, high efficiency LED flashlight Strong magnetic base
- Ergonomic side button
- O-ring sealed, IPX4
- Variable brightness
- LPE Optics
Operation Instructions
- On/Off: Press and release the button
- To access the area light, pull down from the base of the light.
- Adjusting brightness in Flashlight/Area light modes: Press and hold the button down. Light emitted will in-crease/decrease with a quick pause in the beam to indicate the highest/lowest light output.
- Automatically resets to High mode when turned off.
Usage and Maintenance
Battery Replacement: In a dry environment, unscrew the tailcap by turning
counter clockwise. There will then be an inner tailcap that is also removed by
turning counter clockwise. Remove batteries. Insert the new batteries into the
tubes according to the (+/-) symbols. Carefully reinstall each tailcap by
pressing lightly while turning clockwise.
Care Instructions: If you know it’s going to be a while between uses, we
suggest removing batteries from your light and storing your gear in a dry,
protected place.
ANSI/PLATO FL1 STANDARD
Product Warranty
Limited Lifetime Warranty against manufacturer’s de-fects. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleprod-ucts.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>