THERMALRIGHT AX120-R SE PLUS 4Heat Pipe Tower CPU Cooling Installation Guide
- June 13, 2024
- THERMALRIGHT
Table of Contents
THERMALRIGHT AX120-R SE PLUS 4Heat Pipe Tower CPU Cooling
Product Information
This product is an Intel x4 processor with LGA115x/1700 X1 socket. It is version 1.0 and compatible with L x4 17xx.
The package includes
- Intel Screw x4
- LGA115x/1700 V1.0
- L 17XX Standoff x4
It is also compatible with AM4, C, 115X, DE, LGA115X/1700 INTEL, INTEL LGA1700, L, C, and 1700 mounting holes.
Product Usage Instructions
- Ensure that your motherboard supports the LGA115x/1700 X1 socket.
- Place the processor into the socket, aligning the notches on the processor and socket.
- Secure the processor in place using the provided Intel Screw x4.
- If necessary, use the L 17XX Standoff x4 to adjust the height of the processor.
- If you have an AM4 motherboard, use the AM4 mounting hole for installation.
- Adjust the slider position according to your motherboard’s requirements.
- If you have a motherboard with 115X mounting holes, align the slider accordingly.
- For INTEL LGA1700 motherboards, adjust the slider position accordingly.
- If you have a motherboard with 1700 mounting holes, align the slider accordingly.
- Ensure all connections are secure before powering on your system.
INSTALLATION GUIDE Assassin X 120 REFINED SE Series
parts list
AMD AM4
- REMOVE AMD AM4 plastic brackets, KEEP the back plate, install AM4 metal brackets with AM4 screws and AM4 plastic standoffs
- Apply thermal grease on CPU, install the heatsink with a screw driver, and install fans on heatsink with fan clips
INTEL LGA115X/1200
- Install the LGA115X/1700 back plate from the back of motherboard, then place plastic standoffs from front side of motherboard, install LGA115X/1200 metal brackets with screws
- Apply thermal grease on CPU, install the heatsink with a screw driver, and install fans on heatsink with fan clips
INTEL LGA1700 
- Install the LGA115X/1700 back plate from the back of motherboard, then place plastic standoffs from front side of motherboard, install LGA1700 metal brackets with screws
- Apply thermal grease on CPU, install the heatsink with a screw driver, and install fans on heatsink with fan clips
Fan Wiring 
For Fans with ARGB lighting,To
control the ARGB lighting, connect ARGB lighting header(3-pin +5V) to
motherboard ARGB lighting socket or ARGB lighting controller.lighting Effects
can be sunc by connecting fan lighting headers with each other
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>