ULINE H-5592, H-5593, H-5594 Crossover Ladders Installation Guide
- June 7, 2024
- ULINE
Table of Contents
ULINE H-5592, H-5593, H-5594 Crossover Ladders Installation Guide
TOOLS NEEDED
PARTS
#
| QTY.|
DESCRIPTION
---|---|---
1
| 2|
Stile
2
| 1|
Platform
3
| 2|
Left Handrail
4
| 2|
Right Handrail
5
|
36
|
1/2-13 x 114″ Bolt
6| 36|
1/2″ Nylon Hex Nut
ASSEMBLY
WARNING! Please read and
save these instructions. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and
others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain
instructions for future reference.
The crossover ladder is used to provide a safe walkway over obstacles.
The crossover ladder is comprised of two stiles (1), one platform (2), two left handrails (3), two right handrails (4), 1/2-13 x 11/4″ bolts (5) and 1/2″ nylon insert hex nuts (6).
STEP 1:
Lay the platform on its side and bolt the stile on the top of the platform
with the nuts on the outside of the platform. Snug the bolts, but do not
tighten them. (See Figure 1)
STEP 2:
Bolt on the other stile to the top of the platform with the nuts on the
outside of the platform. Snug the bolts, but do not tighten them. (See
Figure 2)
STEP 3:
Bolt on the left and right handrail to the top of the stiles and platform.
Tighten the handrails from the joint in the center. Snug the rest of the
bolts, but do not tighten them. (See Figure 3)
STEP 4:
Lift the crossover ladder with two or more people to stand it upright on its
feet. Bolt the stile on the opposite side and the handrails. Snug the bolts
and start with tightening the joint in the center of the handrail first, then
tighten the remaining bolts. (See Figure 4)
1-800-295-5510
Web : uline.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>