THERMALRIGHT 135 Series TR Silver Soul Installation Guide
- June 14, 2024
- THERMALRIGHT
Table of Contents
THERMALRIGHT 135 Series TR Silver Soul
TR-SILVER SOUL 135 Series
Parts list
AMD AM4
Remove the AMD original plastic support,keep the back plate, and lock it to the original motherboard base plate with AM4 rubber column.
Apply the hot paste, lock the main body with a screwdriver, and fix the fan with a fan wire.
INTEL LGA20XX
Thread in the LGA20XX screws;put on the brackets and then tightening with nuts.
Apply the hot paste, lock the main body with a screwdriver, and fix the fan with a fan wire.
LGA1700
Install the backplane into 1700 holes as shown in the picture and then jam it with o-shaped plastic pad. Then place the backplane on the back of the motherboard, tighten the studs, and fix the support with screws (the support hole is aligned with 1700).
Apply the hot paste, lock the main body with a screwdriver, and fix the fan with a fan wire.
Fan wiring
Insert the fan 4 pin into the main board CPU fan socket 4P If a fan is added, the Y-type one in two adapter can be used to realize double fan PWM,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>