AIBOO A B Pairing Remote Control Light System Instruction Manual
- September 12, 2024
- AIBOO
Table of Contents
AIBOO A B Pairing Remote Control Light System
Specifications
- Pairing: A/B (1)
- Signaling control light : Red and Green light
- Brightness: Adjustable (+/-)
- Light Temperature: Cool and Warm
- Timer: 30 minutes automatic turn-off
- Features: Night light, Light memory setting
Product Usage Instructions
Pairing
- Press the A/B button on the remote control to switch between controlling the first line (A mode) and the second line (B mode).
- To pair a light, turn it on for approximately 10 seconds, then press and hold until the light flashes.
- If pairing in B mode, only lights in the B mode will be controlled by the remote. Use the A/B button to switch between modes.
Memory Setting
To set the intensity and color, press and hold the memory button for 3
seconds until the light flashes to save the setting. When turning off the
light using the switch, wait for 15 seconds after setting with the memory
button to save the memory.
Timer:
Press the timer button to activate automatic turning off after 30 minutes.
Color Combinations:
The color combinations can also be switched using a switch on the product.
INSTALLATION INSTRUCTION
Pairing
- Signaling control light: red light and green light. All lights are shining red from factory settings.
- The red signal light on the remote control can remotely control one line of lights and the green one can control the second line.
Setting method
-
Shortly press button A/B on the remote control and the signal light will turn green. The remote control is set to the B mode by the manufacturer.
-
For pairing turn the lamp for approx. 10 seconds, turn the lamp on and press until the light flashes. In the case that you want to pair in the B mode, the remote control will control only lights in the B mode.
Other lights won’t be controlled. -
Other lights that are not functioning are in the A mode. Press the A/B button, and the signal light on the remote control will turn red. Press the A/B button again, and the signal light on the remote control will turn green.
THE LIGHTS ARE ALREADY PAIRED WITH THE REMOTE CONTROL BY THE MANUFACTURER
Memory
- Set the intensity (color), press and hold the memory button for 3 seconds, and the light will flash (setting is saved).
- When turning the light off by the switch: after setting it with the memory button, turn the light off and leave it for 15 seconds, the memory is saved, then wait for at least 3 more seconds, in the opposite case, the light will change color and intensity.
Timer: by pressing the button, you will activate automatic turning off after 30 minute
The switching of color combinations can also be done via a switch.
FAQ
- Q: How do I know which lights are controlled by each mode on the remote?
- A: The red signal light indicates control of lights in A mode, while the green signal light indicates control of lights in B mode.
- Q: How can I change the brightness and light temperature?
- A: Use the brightness (+/-) buttons to adjust brightness, and select between cool and warm light temperature settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>