AIBOO 3 4 6 8 LED Under Cabinet Lighting Kit Instructions

3 4 6 8 LED Under Cabinet Lighting
Kit Instructions

Product Profile & Packing

1.1 Profile

3 Puck Lights Kit

4 Puck Lights Kit

6 Puck Lights Kit

8 Puck Lights Kit

1.2 Packing List

NO| Part Name| Specifications| 3 Puck Lights Kit| 4 Puck Lights KIT| 6 Puck Lights Kit| 8 Puck Lights Kit
---|---|---|---|---|---|---
A| Adapter| Input:AC100-240V 50/60HZ 12V0.5A /12V1A /12V1.5A L=150cm/59inch| 1 (12V0.5A)| 1 (12V 1A)| 1 (12V 1A)| 1 (12V1.5A)
B| 3-Way Splitter| L=100cm/39.4inch| 1| | |
C| 4-Way Splitter| L=100cm/39.4inch| | 1| |
D| On/Off Switch| L=50cm/19.6inch| 1| 1| 1| 1
E| Controller| L=30cm/11.8inch| 1| 1| 1| 1
F| 6-Way Splitter| L=100cm/39.4inch| | | 1|
G| 8-Way Splitter| L=100cm/39.4inch| | | | 1
H| Extension Cord| L=150cm/59inch| | | | 2
I| Puck Light| L=150cm/59inch| 3| 4| 6| 8
K| Remote| 14 Keys| 1| 1| 1| 1
L| Remote Bracket| White Bracket| 1| 1| 1| 1
M| Two Sided Sticker| Circular, Diameter: 40mm| 6| 8| 12| 16
N| Two Sided Sticker| Rectangle, Dimension: 25X20mm| 1| 1| 1| 1
P| Screw| ST3.5x10mm, Phillips Self-tapping Screw| 6| 8| 12| 16

Specifications Of Puck light

Installation

Warning: Please read the instruction carefully and turn electricity off before installation.

1. To avoid equipment damage or other accidents caused by short circuit, please ensure that the connectors are fully inserted when connecting the wires.
2. Please install the Adapter （A ）in a well-ventilated place where the ambient temperature is appropriate.
3. If you find some issues after installation, please try to fix them according to the below Fault Analysis & Solution. If the issues still won’t be solved, please contact the seller for support.

Step1: Two Installation Ways Of LED Puck Lights 1.Installation Ways I: Mount With Screws (P)

1. As the picture shows, please open the cover of led puck light (I) according to the direction of the arrows.
2. Get the screws (P) mounted through the installation holes to fix the puck light in the installation position.
3. Tighten the cover of the puck light.

Step2: Connection Of Puck Lights Kit
The connection of 3 puck lights kit refers to the below picture.

The connection of 4 puck lights kit refers to the below picture.

The connection of 6 puck lights kit refers to the below picture.

The connection of 8 puck lights kit refers to the below picture.
And the two extension cords (H) can be connected with each of puck lights (I).
No need to connect like the picture shows.

Note: All above puck lights kits
Step4: Fix the Splitter (B/C/F/G)
Use the two sided stickers to stick the 3-way splitter, 4-way splitter, 6-way splitter, 8-way splitter on the installation position.

1. The adapter (A) can be connected directly with the splitter (B/C/F/G) without the component controller (E) & on/off switch (D).
2. All the ports of the splitter (B/C/F/G) don’t need to get all the puck lights (I) connected for your use.

Step4: Fix the Remote (K)

Use the two sided sticker (N) to get the remote bracket (L) mounted on the installation position, and put the remote (K) into it.
So far, the installation of puck lights has been completed.
Remove the plastic sheet of the remote and use the remote to control the lights.
The instruction of using the remote control refers to other separate manual.

Fault Analysis & Solutions

connected with the splitter directly. If all the lights can turn on, it is the issue of the controller.
2.Remove the controller (E) and the on/off switch (D), then get the adapter connected with the splitter directly. If all the lights still don’t turn on, it is the issue of the power supply.| 1.Replace the controller 2.Replace the power supply
Individual light is not on| 3.Install the defective puck light with other ports of the splitter to check whether it can work well. If it still doesn’t work, it is the issue of the puck light.| 3.Replace puck light
The remote doesn’t control the lights.| 4.Not remove the plastic sheet
5.The battery of the remote is not charged.
6.The remote don’t pair with the controller. Or the remote is paired with other controller.| 4.Remove the plastic sheet 5.Replace the battery of the remote
6.Repair with remote control

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>