AIBOO EB-RF-1701 14 Key Single Color Remote Control Instructions

Instruction Of 14-key Single Color
Remote Control

Specifications Of Remote Control

Name: 14 Keys Wireless RF Remote Control
Model: EB-RF-1701

Different Parts Functions Of Remote Control

Electrical Parameters Of Remote Control:

Advantages Of Remote Control:
Memory Function: the controller can keep the last setting when you switch on the cabinet lights again.Hidden Installation: the controller can be hidden for installation so you can contrthe lights without pointing at the controller by the remote.

Directions Of Using Remote Control

2.1 Connection Of LED Controller

Notes:

Power Input: DC 5V Output Power: <30W
Power Input: DC 24V Output Power: <144W
Power Input: DC 12V Output Power: <72W

2.2 Details Of Remote Buttons

| Turn on the controller
---|---
|  Turn off the controller
| Keep the lights on at full brightness
| Stepless Dimmable in 10 brightness levels
| 100% / 50% / 25% brightness levels
| Get the controller paired with the remote
| Get the controller decoded with the remote
| Timing setting, auto off in 1 / 2 / 4 / 8 hours

Pairing Of Remote Control

If you only have one set of puck lights with the remote control, no need to get the controller repaired with the remote. The remote control of the puck lights has been paired during quality inspection. If you have two or more sets of puck lights with remote control,  there will be several following using situations:

1. Need to reset the remote control kits for two or mote sets of puck lights due to incorrect operation
2. Need to reset one controller to only respond to one remote for two or more sets of puck lights
3. 3.Need to reset the remote control kits for two or more sets puck lights to be controlled in groups

3.1 ONE TO ONE PAIR
One Controller Responds To One Remote

1. Install one set of puck lights without the controller. After inserting the power plug, please turn on the lights by the manual switch.
   

2. Reinstall the set of puck lights with controller after pull out the power plug. And press the button “ Pair “ on the remote within 5 seconds after inserting the power plug to the electricity outlet. Then release the button when you find all the lights flashing. It  means that the controller is repaired with the remote. ( Warm Tips: please keep other sets of puck lights in power-off state during resetting. )
   

3. Repeat the steps 1 and step 2 to finish the repairing other remote control kits of other puck lights sets.

3.2 ONE TO ALL
All Controllers Respond To One Remote

1. Install all sets of puck lights without the controllers. After inserting the power plugs, please turn on the lights by the manual switches.
   

2. Reinstall all sets of puck lights with controllers after pull out the power plugs. And press the button “ Decode “ on the remote within 5 seconds after inserting the power plugs to the electricity outlet. Then release the button when you find all the lights  flashing. It means that all the controllers are repaired with the remote. ( Warm Tips: due to signal interference of more puck lights, some puck lights sets are not flashing during repairing, please make the puck lights sets which finish the repairing to power  off and repeat the step 2 to repair other puck lights sets until all sets of puck lights finish the resetting. )
   

3.3 GROUP OPERATION
All Remote Control Kits Operate In Groups With No Limitations

1. Install the first group of puck lights sets without the controllers. After inserting the power plugs, please turn on the lights by the manual switches.
   

2. Reinstall the set of puck lights with controller after pull out the power plug. And press the button “ Pair “ on the remote within 5 seconds after inserting the power plug to the electricity outlet. Then release the button when you find all the lights flashing. It  means that the controller is repaired with the remote. ( Warm Tips: please keep other sets of puck lights in power-off state during resetting. )
   

3. Repeat the steps 1 and step 2 to finish the repairing other remote control kits of other puck lights sets.

Note: In the process of repairing, if the controllers don’t repair the remote within 5 seconds after inserting the power plug, it means that the remote control kit doesn’t repair successfully. Please repair the remote control kit after pulling out the power plug for at  least 5 seconds.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>