AIBOO B0BX43YQRQ 4 Light Adjustable Dimmable Track Lighting Kit Instruction Manual
- June 17, 2024
- AIBOO
Table of Contents
AIBOO B0BX43YQRQ 4 Light Adjustable Dimmable Track Lighting Kit
Product Information
Specifications
- Model: Track Lighting GU10
- Power Supply: AC 90-240Vac, 50-60Hz
- Max Wattage: 4 Track Lighting GU10 – 4xGU10 MAX: 50W, 6 Track Lighting GU10 – 6xGU10 MAX: 50W
- Dimensions:
- 4 Track Lighting GU10:
- Length (L): 620mm (24.4inch)
- Diameter (D): 120mm (4.72inch)
- Height (H): 25mm (0.98inch)
- Spacing (S) between tracks: 70mm (2.76inch)
- 6 Track Lighting GU10:
- Length (L): 1158mm (45.6inch)
- Length of individual tracks (L1-L4): Refer to manual
- Diameter (D): 120mm (4.72inch)
- Height (H): 25mm (0.98inch)
- Spacing (A) between tracks: 70mm (2.76inch)
- Packing List: 4 Track Lighting GU10, 6 Track Lighting GU10
- Components included: Wire Nut, Screws, Expansion Pipe, Self-tapping Screws, Installation Hook Components
Frequently Asked Questions
- Q: Are GU10 lamps included in the packaging?
- A: No, GU10 lamps are not included in the packaging. They need to be purchased separately.
- Q: What is the voltage rating for the product?
- A: The product operates at AC 90-240Vac, 50-60Hz.
PRODUCT PROFILE & PACKING
PROFILE
4 TRACK LIGHTING GU10⁄ PRODUCT DIMENSIONS
AC 90-240Vac/ 50-60Hz 4xGU10 MAX:50W
L=620mm/24.4inch| D=120mm/4.72inch| S=70mm/2.76inch
H=25mm/0.98inch| A=70mm/2.76inch| L1=188mm/7.4inch
H1=86mm/3.4inch| A=70mm/2.76inch| D1=30mm/1.18inch
6 TRACK LIGHTING GU10 ⁄PRODUCT DIMENSIONS
AC 90-240Vac/ 50-60Hz 6xGU10 MAX:50W
D=120mm/4.72inch| H=25mm/0.98inch| A=70mm/2.76inch
H1=86mm/3.4inch| D1=30mm/1.18inch| L=1158mm/45.6inch
L1=1070mm/42.1inch| L2=644mm/25.4inch| L3=372mm/14.6inch
L4=245mm/9.6inch| |
PACKING LIST ( GU10 LAMP NOT INCLUDED )
NO| Part name| Specification| 4 Track Lighting| 6 Track
Lighting
---|---|---|---|---
A| Wire Nut| I| 3| 3
C| Screws| PM4x30，Cross-shaped| 2| 2
D| 4 Track Lighting Fixture| US Standard Base| 1|
E| 6 Track Lighting Fixture| US Standard Base| | 1
G| Expansion Pipe| Plastic Material| | 2
H| Self-tapping Screws| ST3.Sx20，Phillips Head| | 2
---|---|---|---|---
I| Installation Hook Components| Plastic Material| | 2
J| Installation Hook Components| Plastic Material| | 2
GU10 LAMP NOT INCLUDED
INSTALLATION
Warning
- Please read the instruction carefully and turn electricity off at the main circuit breaker panel before beginning installation.
4 Track Lighting GU10 Installation
Step1: Connect to the circuit
- As shown in the figure, please take apart the screws ( D1 ) and mounting plate ( D3 ) from the base ( D2 ) of the 4 track lighting fixture ( D).
- Get the corresponding two copper wires tightened and screw them into the wire nuts (A). The sequence of the tightening copper wires refers to the following picture.
Step 2: Installation Of Mounting Plate ( D3 )
- Get the screws ( C ) passed through the mounting holes of mounting plate ( D3 ) to fix it in the installation position.
Step 3: Installation Of Base ( D3 )
- Get the screws of the mounting plate ( D3 ) passed through the holes of base ( D2 ) and screw in the nuts ( D1 ) to secure the track lighting fixture.
Step 4
- Install with GU10 lamps to finish the installation. Turn on the electric brake.
6 Track Lighting GU10 Installation
Step 1: Connect to the circuit
- As shown in the figure, please take apart the screws ( E1) and mounting plate ( E3 ) from the base ( E2 ) of the 6 track lighting fixture (E).
- Get the corresponding two copper wires tightened and screw them into the wire nuts (A). The sequence of the tightening copper wires refers to the following picture.
Step 2: Installation Of Mounting Plate ( E3 )
- Get the screws ( C) passed through the mounting holes of mounting plate ( E3 ) to fix it in the installation position.
Step 3: Fix Base ( E3 ) & Installation Hook Components (1) (J )
- Get the screws of the mounting plate (E3 ) passed through the holes of base ( E2 ) and screw in the nuts ( E1 ) to secure the track lighting fixture.
- Fix the installation hook components (1) (J) in the installation position by using self-tapping screws ( H).
Step 4
- Install with GU10 lamps to finish the installation. Turn on the electric brake.
Tips
- Please clean the surface of the track lighting fixture with a dry or slightly damp clean cloth (use clean water, never a solvent)
- Please ensure that the power is turned off before cleaning.