Sony Extra Bass Active Sports in Ear Ear Bud Over The Ear Splashproof Premium Headphones-Complete Features/User Instruction
- June 5, 2024
- Sony
Table of Contents
Sony Extra Bass Active Sports in Ear Ear Bud Over The Ear Splashproof
Premium Headphones
Specifications
- AUDIO SENSITIVITY : 104 dB
- FREQUENCY RESPONSE : 22000 Hz
- SPECIAL FEATURE : Sports-and-exercise
- FORM FACTOR : Over-Ear, In-Ear
- MATERIAL : Plastic
- PRODUCT DIMENSIONS : 2 x 2.75 x 6 inches
- ITEM WEIGHT : 2.39 ounces
- SENSITIVITY : 104 dB/mW
- FREQUENCY RANGE: 17-22,000 Hz
- CORD SIZE: 1.2 m
Introduction
The Sony MDR earbuds provide excellent sound quality and are made for people who like to listen to music while working out. Don’t let your passion for music interfere with your love of jogging. Due to the loop hangers that wrap snugly and securely around your ear, you may use these earphones to simultaneously enjoy both activities. They also feature four silicone earbuds of various sizes so you may select the most secure alternative while working up a treat. Rich, robust sound will give you an extra energy boost. No matter what you’re listening to, the 13.5mm driver produces energizing, strong sound, and there’s more than enough volume to keep you on your toes throughout even the longest exercises. You don’t have to be concerned that the rain outside will prevent you from enjoying your favorite record because of the splashproof construction. And whether you’re exercising on a treadmill or running through the streets, the long 1.2m chord gives you plenty of room for mobility.
HOW TO PAIR
Your headphones’ power button should be pressed and held for around 7 seconds. This will activate pairing mode, enabling it to connect to your device. When you notice the LED indicator blinking rapidly (typically flashing red/green and blue), let off of the button.
HOW TO USE
Activate the headset. For roughly 2 seconds, press and hold the button. After you release the button, be sure the indication (blue) flashes.
- Display the gadgets that are connected to the smartphone.
- Choosing [Bluetooth] under [Setting]
- Turn on Bluetooth by touching [] next to [Bluetooth].
- Bluetooth touch.
HOW TO CONNECT
Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name.
HOW TO CONTROL VOLUME
the Sony | Headphones Connect app should be launched. Change the touch sensor function, then tap the (Settings) icon at the bottom. Tap Ambient Sound Control and change the Function to Volume Control in the Left unit settings. After confirming that Volume Control is now the Function, hit Done.
Frequently Asked Questions
-
Why won’t my Bluetooth pair?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device. -
How can I make my WF XB700’s loudness higher?
BOOST VOLUME
To go up one step in volume while listening to music, press the button on the left unit once. REDUCE THE VOLUME: To continually lower the volume while listening to music, press and hold the button on the left unit. When the volume is where you want it, release the button. -
On my Sony WF XB700, how do I alter the settings?
For roughly 20 seconds, press and hold the button on the left unit. When the headset’s red indicator light flashes and switches off, let go of your finger. For roughly 20 seconds, press and hold the button on the right unit. When the headset’s red indicator light flashes and switches off, let go of your finger. -
On the Sony earphones, where is the button?
When the headset is not placed in the charging case, you can turn it on by pressing the headset’s button. For roughly 2 seconds, press and hold the buttons on the right and left units until the indication (blue) starts to flash. -
With Sony earbuds, how do you answer a call?
The following actions can be taken using the touch sensor on either the left or right unit. Operate the headset on the unit that is worn if you are only wearing one unit. To answer a phone, swiftly tap the touch sensor twice. To decline a call, keep your finger close to the touch sensor. -
Why won’t my earbuds link with one another?
If the battery in your headphones is low, they might not be able to pair. Additionally, I’ve discovered that certain Bluetooth headphones stay on when in the case, which causes them to deplete to zero percent more quickly than you would expect. Even if they claim to have been completely charged before pairing, try plugging them in. -
Why can just one set of earbuds pair?
Look over the settings. Depending on your audio settings, headphones might only play in one ear. So make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well. -
How do you get the music playing on both earphones to match
Toggle to the “Levels” tab. To the right of your device, select the “Balance” button. To the right of your device, select the “Balance” button. Restore the balance so that it is equal, alternatively, change the balance until your speakers sound the same. -
Why isn’t working one of my Bluetooth earbuds?
You must first restart the headset in order to fix Bluetooth earphones. Try resetting Bluetooth and pairing if it doesn’t fix the issue. Check your mobile/PC audio settings if that doesn’t work. Otherwise, we believe your sound is the cause of the issue. -
On Bluetooth headphones, where is the power button?
You are referring to the middle of the number “3.” All of the functions are on the same side, which is fantastic. If you decide to connect to your phone, the centre button also serves as the “answer and hang up” button.