JUST WIRELESS 20526 Pro True Wireless Earbuds User Manual

JUST WIRELESS 20526 Pro True Wireless Earbuds

Earbud Use Mode – Automatic Pairing

1. Tear off the charging insulation sticker behind the dual earbuds and put them back into the charging case to activate earbuds.
   Note: If the headset is not in charging state, please use USB cable to charge the charging case.

2. Take out the two earbuds. Red and Blue LEDs will automatically be flashing. Earbuds will pair successfully after 3-5 seconds. You will then hear prompt tone “Connected.” With the main ear flashing Red and Blue, open the phone’s Bluetooth• search to find the pairing name: Just Wireless , then tap. When prompt tone “Connected” is heard, you can use your earbuds.

3.  Every time you take out the earbuds from the charging case, the earbuds will reconnect automatically to your Bluetooth'” devices.

Earbud Use Mode – Manual Pairing

1.  Hold “Power On” button for 3 seconds (the two sides of the earbuds flash Blue and Red lights slowly). Earbuds will pair successfully after 3-5 seconds.
2. The prompt “Connected” will sound, and then main earbuds will flash Red and Blue. Open your phone Bluetooth search on your device, find the pairing name: Just Wireless, and tap pairing. When prompt tone “Connected” is heard, you can use your earbuds.

Operation

Power off/on

Press & hold either side for 3 seconds, earbuds will state “Power off,n or “Power on.”

Play/Pause: Press either side to play or pause music.

Answer/ End a call

Press either side to answer/end a call.

Reject a call: Double click either side to reject a call.

Music search – Play Mode Only

Double Click- Previous track

Double Click- Next track

Note – some applications change these settings.

Using Only One Earbud

1. If either side of the earbuds is taken out of the charging case alone, it will automatically enter the pairing state. You can search directly in Bluetooth'” interface of the mobile phone and tap to connect the device and enter the use. At this time, please put the other one back into the charging case.
2. When separately using one earbud, take it out of the charging case and press the “Power On” button for 3 seconds putting the earbud into pairing mode. You then can search Just Wireless in your phone Bluetooth• screen and tap to connect the device.

How to charge the earbuds

1. The earbuds are placed into the charging box and the indicator light will go on. Charging case light will go out when earbuds fully charged.
2. Indicator lights state: Charge case battery up to 0 -25%, Blue light flashes 1 bar

• Charge case battery up to 25%- 50%, Blue light flashes 2 bars
• Charge case battery up to 50%-75%, Blue light flashes 3 bars
• Charge case battery up to 75%-100%, Blue light flashes 4 bars

How to charge the charging case

Use 5V charger to charge the Charging case. When fully charged, the Blue light stays on.

Please pay attention to signals when using earbuds:

1.  Your wearing method is important to avoid reception interruption. Please wear appropriately
2.  Covering any earbud with your hand while wearing can lead to poor audio reception between earbuds.
3. Avoid obstacles between the earbuds. The right earbud needs to communicate with the left (main earbud) to work in binaural mode.
4. The R earbud may disconnect from the L earbud occasionally. Please wait a moment or change the position of the earbuds.

Tips

1.  Please read the instructions carefully before using the product and keep them safe.
2. For the first time use, please charge this product.
3. If the product is not used for more than three months, please charge it.
4. If the phone cannot search Bluetooth,'” please make sure that the earbuds are in “pairing mode.” If the earbuds are not paired or connected for a long time, the earbuds pairing function will be turned off. To solve, restart the phone. If earbuds have a program error, restart them.
5. When the main and secondary earbuds cannot be automatically connect, they can be in the shutdown state. Hold down the multi-function key on the earbud until the white light stays on. Keep them close to each other and wait for the connection to restore.

Bluetooth and associated product marks ore the trademarks of an independently owned and operated compony. This product has not been licensed by this company.
For Warranty information, please visit our website www.justwlreless.com
[email protected]
14058thSt,Broolclyn, NY11220
0 2021 Just Wireless. Made In China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>