UMF RUHLA Poljot 3133 Chrono Mechanic Watch User Manual

UMF RUHLA Poljot 3133 Chrono Mechanic Watch

Product Information

The Chrono Mechanik Poljot 3133 is a mechanical watch manufactured by Uhren- und Maschinenfabrik Ruhla in Germany. It features a start/stop button [1], a crown [2], a return button [3], a stop-minute indicator [6], a time-second indicator [4], and a stop-second indicator [5].

It is important to note that this watch should only be wound clockwise until it reaches the stop point. Overwinding should be avoided. For adjusting the time, the crown [2] needs to be pulled out and the time can be set. Once adjusted, the crown [2] should be pushed back into place.

Adjusting the date requires pulling the crown [2] and fixing the hour hand to the 11 o’clock position. Winding the watch until the hour hand passes noon will cause the date to jump forward by one day. To set the date back, wind the hour hand counterclockwise to 11 o’clock and then again clockwise passing noon. Repeat this procedure until the desired date is set. After setting the date, readjust the time if necessary. The stop function of the watch keeps the second hand [5] in the noon position. However, this can be overridden by using the start/stop button [1]. The return button [3] is used to reset the second hand to zero. The stopped minutes are indicated on the stop-minute indicator [6].

Product Usage Instructions

1. Winding up the watch:

   • Rotate the crown clockwise until it reaches the stop point. Do
     not overwind.

2. Adjusting the time:

   • Pull out the crown [2] to adjust the time.
   • Set the desired time.
   • Push the crown [2] back into place.

3. Adjusting the date:

   • Pull out the crown [2] to adjust the date.
   • Fix the hour hand to the 11 o’clock position.
   • Wind the watch until the hour hand passes noon, causing the date to jump forward by one day.
   • Wind the hour hand counterclockwise back to 11 o’clock and then clockwise passing noon to make the date jump another day.
   • Repeat this procedure until the desired date is set.
   • After setting the date, readjust the time if necessary.

4. Stop function:

   • The second hand [5] remains in the noon position when the stop function is activated.
   • To start and stop the stop function, use the start/stop button [1].
   • To reset the second hand to zero, use the return button [3].
   • The stopped minutes are indicated on the stop-minute indicator [6].

Care Instructions

• When the watch is stopped, it should be wound before wearing. Approximately 15 turns clockwise in the neutral position [N] are recommended.
• Avoid wearing the watch while swimming in seawater as saltwater can damage the gaskets, insulation of glass, encasement, and crown. If the watch comes into contact with seawater, rinse it immediately with clear fresh water.
• Regularly check the functionality of the gasket twice a year.

Warranty Conditions
If your watch needs repair or if you need to claim the warranty, please contact the point of sale.

Chrono mechanic Poljot 3133

INSTRUCTIONS

• Winding up the watch:
  Wind it up clockwise only till the stop (do not overwind)

• Adjusting the time:
  Pull crown [2] and set time, push crown [2]

• Adjusting the date:
  Pull crown [2] and fix hour hand to 11 hs; go on winding till hour hand pass-es 12 hs, date jumps 1 day; wind hour hand anticlockwise till 11 hs, then again clockwise passing 12 hs, date jumps another day; repeat the procedure till the date desired has been set. Now readjust the time.

• Stop function:
  Hand [5] remains in 12 his position, exception: of the stop function start and stop video button [1] ; return hand vide button [2] ; minutes stopped are indicated on the stop-minute indicator [6]

CARE INSTRUCTIONS

NOTE : When the watch is stopped – i.e. no longer ticking – it must be wound before wearing (approximately 15 turns clockwise in a neutral position [N] ).

Please do not wear your watch while swimming in seawater. Saltwater destroys gaskets and insulation of glass, encasement, and crowns. If your watch should come into contact with seawater, please rinse it immediately with clear fresh water.
You should check the functionality of the gasket twice a year regularly.

WARRANTY CONDITIONS
Your UMF Ruhla watch comes with a 24-month warranty, counting from the date of purchase. Excluded from the warranty are wearing parts such as bracelet, clasp, crown, watch glass – battery in quartz watches – as well as normal signs of wear and tear. The warranty is void if defects are caused by gross negligence by the buyer or third parties. Should you have legitimate complaints, you can send in the watch including the proof of purchase. Watches sent to us freight forward unfortunately cannot be accepted.

In case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>