Senyang HFP Pro Wireless Headset Instruction Manual
- June 14, 2024
- Senyang
Table of Contents
Senyang HFP Pro Wireless Headset Instruction Manual
Wireless headset
Product Specifications:
Wireless version: V5.3
Battery specification: Headset 3 .7V
Supported Modes: HFP/HSP/ A2DP/AVRCP
Sensitivity: 105dB±3dB S.PL at 1KHz
Standby time: approx. 80 hours
Signal distance: 10 meters (in an ideal environment
without any large obstacles)
Charging time: approx. 1 hour for the charging compartment and 1 hour for the
headphones
Number of times charging the headset about 2 times from the charging
compartment:
Functional operation instructions
Power on
Take the headset out of the charging compartment and turn it on automatically or long touch the left and right headset multi-function keys for 3 seconds to turn it on.
Shutdown
Put the headset into the charging compartment automatically shut down long touch the left and right headset multi-function keys for 5 seconds to shut down.
Power on and connect
After successful pairing, the second time you turn on the Bluetooth headset, it will enter the reconnect state and automatically reconnect to the cell phone it has been connected to.
Play/Pause
In standby mode, click the left and right headset multi-function area can directly play music, click the left and right headset multi-function area can pause the playback.
Answer incoming calls
When the cell phone calls, click the left and right headset multi-function keys can answer the call.
Hang up
When the cell phone is talking, click the multi-function area of the left and right headsets to hang up the phone.
Call Rejection
When the cell phone call, long press the left and right headset multi-function keys for 2 seconds can reject the call.
Last Number Redial
When you are on standby or playing music, triple-click the multi-function area of the left headset to dial the last dialed phone number in your call history.
Start voice assistant
You can start Apple Siri or Google voice assistant to control your cell phone by voice.
Low Battery Alert
When the headset battery is low, it will play the low battery tone once every 60 seconds until the headset is turned off with low battery.
Pairing method
Normal pairing method
- Remove the headset from the charging compartment or press and hold the multi-function area of the left and right headset for 3 seconds at the same time to turn on the headset, until the indicator light blinks alternately to enter the pairing state, enter the pairing state, enter the pairing mode, the pairing mode is automatic, the pairing mode is successful, the indicator light of the main ear blinks alternately to extinguish the indicator lightof the secondary ear, and play the pairing mode successful beeps at the same time.
- Start the wireless function of the cell phone or other devices, if it is an Android system cell phone or device, please click on the cell phone “search for wireless devices” option, if it is an OS system cell phone or device, it will automatically search for the device; when searching for the model of the wireless headset, click on the pairing; when the pairing is successful, the headset will emit a connecting beep, and the left and right headset indicator lights flash alternately. When the pairing is successful, the headset will emit a successful connection tone, and the left and right headset indicator lights will go out, entering the connection standby state, after successful pairing, the right ear will be the right channel, and the left ear will be the left channel. The right ear will be the right channel and the left ear will be the left channel after successful pairing. The two headsets can also be paired with the cell phone individually, the operation method can be operated according to the operation methodin step 2 above.
Charging operation
- Plug one end of the charging cable into the chargingcompartment and one end into the charger to charge the charging compartment, and the charger should use a standard 5V1A charger to charge the charging compartment.
- Charge the headset: put the headset into the charging compartment to automatically charge, the headset indicator will light up when charging, and turn off when fully charged;
Cautions
- Please charge in a safe environment. When charging the charging compartment, separate the charging compartment from the charger as soon as possible to avoid damage to the charging compartment if it is left plugged in for a long
- When playing music, please adjust the music to the appropriate volume level to avoid long-term hearing damage caused by loud
- Try to avoid using the headset in places with interference sources, otherwise it may have an impact on the headset
Try to avoid using the headset in a corrosive environment, so as not to affect the function of the headset
Warm reminder
Wheл you use this wireless headset to listeл to music or talk, please pay atteлtioл to the appropriate volume adjustmeлt, so as to avoid excessive volume oл your heariлg!
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving
- Increase the separation between the equipment and
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an experienced radio/TV technician for
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>