AIBOO 4 Lights RGB Changing Christmas Xmas Under Cabinet LED Lights Kit Instructions

Light Fixture Instruction

Product Profile & Packing

1.1 Profile
4 Puck Lights Kit

6 Puck Lights Kit

8 Puck Lights Kit

12 Puck Lights Kit

Note: The connection ways of all puck lights kits in above pictures shown are one of the connection methods. There are various ways to connect light fixture. Refer to
Step1: Connection Of Puck Lights Kit, the detailed connection method is explained below.
1.2 Packing List

NO| Part Name| Specifications| 4 Puck
Lights Kit| 6 Puck
Lights Kit| 8 Puck
Lights Kit| 12 Puck
Lights Kit
---|---|---|---|---|---|---
A| Plug Cord| L=120cm/47.2inch| | | 1| 1
B| Adapter| Input:AC100-240V 50/60HZ
L=100cm/39.3inch 12V 2A/3A| | | 1 (12V2A)| 1 (12V2A)
C| Adapter| Input:AC100-240V 50/60HZ
L=150cm/59inch 12V 1A| 1| | |
D| On/Off Switch| L=50cm/19.6inch| 1| 1| 1| 1
E| LED Dimmer| L=13cm/5.1inch| 1| 1| 1|
F| Adapter| Input:AC100-240V 50/60HZ
L=150cm/59inch 12V 1.5A| | 1| |
G| 2 Channel LED Dimmer| L1=L2=13cm/5.1inch| | | | 1
H| Extension Cord| L=150cm/59inch| | 2| 2| 6
I| Puck Light| RGBW/RGBWW LED Light
L=150cm/59inch| 4| 6| 8| 12
J| 4 Way Splitter| White Splitter with 4 Ports| 1| | |
K| Remote| 40 Keys| 1| 1| 1| 1
L| 8 Way Splitter| White Splitter with 8 Ports| | 1| 1| 2
M| Two Sided Sticker| Circular, Diameter: 40mm| 8| 12| 16| 24
P| Screw| ST3.5x10mm, Phillips
Self-tapping Screw| 8| 12| 16| 24

Specifications Of Puck Light

Size|  L=30cm/11.8inch
A=6cm/2.36inch
D=0.8cm/0.31inch
---|---
Power| 3W
Voltage| DC12V
Beam Angle| 120 Degrees
LED Color| RGBW/RGBWW

Installation

Warning: Please read the instruction carefully and turn electricity off before installation.

1. To avoid equipment damage or other accidents caused by short circuit, please ensure that the connectors are fully inserted when connecting the wires.
2. Please install the Adapter （B/C/F ）in a well-ventilated place where the ambient temperature is appropriate.
3. If you find some issues after installation, please try to fix them according to the below Fault Analysis & Solution. If the issues still won’t be solved, please contact the seller for support.

Step 1: Connection Of Puck Lights Kit
Before installation of the led puck lights (I), please decide to how to connect the light fixture.
The connection methods of lighting fixture are flexible and diverse.
The connection of 4 puck light kit refers to the below picture.The connection of 6 puck light kit refers to the below picture. And the two extension cords (H) can be connected with each of puck lights (I). No need to connect like the picture shows.

The connection of 8 puck light kit refers to the below picture. And the two extension cords (H) can be connected with each of puck lights (I). No need to connect like the picture shows.The connection of 12 puck light kit refers to the below picture. And the two extension cords (H) can be connected with each of puck lights (I). No need to connect like the picture shows.

Step 1: All above connection ways of puck lights

1. The adapter (B/C/F) can be connected directly with led dimmer (E/G) without the component on/off Switch (D).
2. All the ports of the splitter (J/L) don’t need to get all the puck lights (I) connected for your use.
3. Warning: The arrow on the controller (E/G) should point to the arrow on the splitter(J/L) while connection.

Step 2: Two Installation Ways Of LED Puck Light s

1. Installation Ways I: Mounted With Screws (P)

1. As the picture shows, please open the cover of led puck light (I) according to the direction of the arrows.
2. Get the screws (P) mounted through the installation holes to fix the puck light in the installation position.
3. Tighten the cover of the puck light.

2. nstallation Ways II: Install with Two Sided Stickers (M)
Use two sided stickers (M) to stick the
puck light (I) on the installation position.

Step 3: Using Of Remote (K)
Remove the plastic sheet of the remote and use the remote to control the lights.
The instruction of using the remote control refers to other separate manual.

Fault Analysis & Solutions

connected with led dimmer (E) directly. If all the lights can turn on, it is the issue of the on/off switch.| 1. Replace the on/off switch
Individual light is not on| 2. Install the defective puck light with other ports of the splitter to check whether it can work well. If it still doesn’t work, it is the issue of the puck light.| 2. Replace puck light
3. Remove the plastic sheet
The remote doesn’t control the lights.| 3. Not remove the plastic sheet.
4. The battery of the remote is not charged.| 4. Replace the battery of the remote

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>