Treevol Furniture WHFP039 Desk Ryndon with Hutch Installation Guide
- September 12, 2024
- Treevol Furniture
Table of Contents
Treevol Furniture WHFP039 Desk Ryndon with Hutch
Specifications :
- Product Name: Desk with Hutch
- Model Number: DH001
- Material: Wood
- Color: Brown
- Dimensions: 60″ x 30″ x 72″
- Weight Capacity: 100 lbs
Product Usage Instructions
What You Will Need:
Hi! My name is Armando, and I’ll be with you while you assemble this
cabinet.
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard or rug)
- Electric screwdriver (optional)
Assembly Process:
Where to Start:
Ensure you have all the necessary panels and hardware as listed in the
manual. Check the quantities and condition of each item before starting.
Hardware Bag Contents:
- Wood dowel x45
- Spreading bolt x45
- Minifix cam x45
- Cover caps x50
- Wall anchor + screw x4
- Nail-on glide x6
- Corners Union x2
- Flat head screw 9/16 x4
- Support back panel flat head screw 3/4 x4
Dowels and Minifix System:
Wood Dowels :
- Insert the dowel into the indicated hole between panels.
- Gently hit the dowel until it’s fully inside to adjust the joint.
Minifix System :
- Insert Minifix cam with the arrow pointing towards the panel’s edge.
- Add the spreading bolt with the black plastic part facing down.
- Turn and secure the joint after joining panels.
Assembling Steps:
Follow the panel layout instructions provided in the manual to assemble the
cabinet step by step.
Frequently Asked Questions (FAQ):
-
Q: How much weight can the cabinet resist?
A: The cabinet has a weight capacity of 100 lbs. Please avoid exceeding this limit to ensure durability. -
Q: Can I use an electric screwdriver for assembly?
A: An electric screwdriver is not necessary but can make the assembly process easier and faster. -
Q: What should I do if I lose some hardware during assembly?
A: It’s crucial to keep all hardware components safe. If you lose any parts, contact customer support for replacements.
ASSEMBLY INSTRUCTIONS
DESK WITH HUTCH
It’s much better if you get some company for this!
What will you need?
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
Where should you start?
This is so IMPORTANT!
-
Over the next few pages is the panel and hardware content for this cabinet.
Please make sure that the quantity of each one is correct, and that everything is in good shape. -
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
| A – x1 | B – x1 | C – x1 | D – x1 |
|---|---|---|---|
| E – x1 | F – x1 | G – x1 | H – x1 |
| I – x1 | J – x1 | K – x1 | L – x1 |
| M – x1 | N – x1 | O – x1 | P – x1 |
| Q – x2 | R – x2 | S – x1 |
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.
How do the dowels and Minifix system work?
- this is so important too!
- Everytime you’re using one of these connectors during the assembly, you should follow these same steps.
- Wood dowels
They are little wooden cylinders.
When joining two panels together, don’t forget to gently hit the panels to adjust the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
-
This is a Minifix cam.
It has a little arrow on its upper surface. -
You should insert these cams with the little arrow pointing towards the drilling on the panel’s edge (shown on the left).
-
This is a spreading bolt.
You should put it with the black plastic part facing down. -
After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.
Let’s start assembling
You can see the last page of this manual to have a full look of the panels of this cabinet.
Locate the corner brackets at the bottom corners and screw with Flat Head Screw 9/16″
Fix your cabinet to the wall
- On the wall, measure and mark the points shown below.
- Drill on the markings with a 5/16″ drill bit.
- Insert the wall anchors inside the drillings.
- Place the cabinet and secure it with the screws.
- After adjusting all the Minifix cams, cover them up with the cover caps.
- After finishing the assembly, lift off al the adhesive letters.
How much weight does my cabinet resist?
Congratulations! It’s done
- But don’t go yet!
- There are some recommendations left for you to take care of your cabinet correctly from now on.
SUPER IMPORTANT!
- We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone.
- Be specially careful with the kids.
Taking care of your cabinet:
- Do not paint the cabinet.
- The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
- Clean the metallic hardware with a dry cloth.
- DO NOT overload the cabinet (see suggested loads)
- Do not hit or hammer the cabinet (only when indicated here).
- Clean it with thinner, a soft soap solution or simply a damp cloth.
- Don’t drag the cabinet, lift it up with other people.
- Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
WARRANTY POLICY
- Furniture has a 3 year warranty coverage in wooden parts and 1 year warranty coverage in hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.
- Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet.
- This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.
- This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc.\
- Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).
- To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company.
- There are no other warranties applicable to this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>