RESPONSE RADIANCE RESP3-1WH 3 in 1 Bathroom Heater Exhaust Fan and Light Instruction Manual
- June 9, 2024
- RESPONSE RADIANCE
Table of Contents
RESPONSE RADIANCE RESP3-1WH 3 in 1 Bathroom Heater Exhaust Fan and Light
Product Information
The Response Radiance is a 3 in 1 bathroom unit that includes a heater, exhaust fan, and light. It has been designed to efficiently remove steam and odors, provide instant heat, and offer effective lighting within the bathroom. The unit is built with ABS material and is IPX4 rated. It comes with a full function wireless wall controller and has a modern and sleek design that compliments any bathroom or ensuite style. The quality AC motor with sealed for life bearings, advanced impeller and housing design, and removable grille make it easy to clean and install.
INTRODUCTION
The Response Radiance with heater, exhaust fan and light sets a new benchmark for 3 in 1 bathroom units. Its modern and sleek design will seamlessly compliment any bathroom or ensuite style. It has been engineered to efficiently exhaust steam and odours, deliver instant heat, and provide effective lighting within the room. Its unique design, lightweight construction and full function wireless wall controller, make the Response Radiance easy to install into established or new homes.
- Designed and engineered for fast and efficient installation.
- Modern contemporary design.
- Wireless wall controller activates all operating functions.
- Tungsten-Halogen heat globes provide instant heating.
- LED lights can be set to cool, neutral or warm white to match other installed lights.
- Equipped with non-return backdraft damper.
- Made from ABS for a tough but light-weight design.
- Fitted with plug and lead.
- Grille can be easily removed for cleaning.
OVERVIEW
DIMENSIONS
Fan Dimensions
- Height: 425mm
- Width: 212mm
- Hole Cut-Out: 320mm
- Spigot: 152mm (1 piece, removable)
- Noise Level: 37 dBA @ 3m (high speed), 27 dBA @ 3m (low speed)
Controller Dimensions
- Height: 88mm
- Width: 14mm
Air flow
Model Specifications
- Air flow is measured free air with grille installed.
- On 4200K light colour temperature.
Colour indicated in drawings above is for illustrative purposes only.
Features
- Grille can be rotated 90 degrees to align LED lights and heat lamps with room shape.
- Comes with a full function wireless wall controller
- Easy to install into new or established homes
- Built with high strength installation swing clips
- 1 year warranty on Tungsten-Halogen heat globes (conditions apply).
Product Usage Instructions
- Ensure that the power supply is switched off before installation.
- Use the hole cut-out dimensions provided to cut a hole in the ceiling where the unit will be installed.
- Insert the unit into the hole and secure it in place using the high strength installation swing clips.
- If necessary, rotate the grille 90 degrees to align the LED lights and heat lamps with the shape of the room.
- Connect the wiring according to the wiring diagram provided in the installation and maintenance instructions.
- Install the wireless wall controller in a convenient location.
- Switch on the power supply and test the unit to ensure it is working properly.
- Refer to the user manual for further information on using and maintaining the unit.
ENGINEERED TO COMPLIMENT ROOM SHAPE
Grille can be rotated 90 degrees so the alignment of LED lights and heat lamps can better suit shape of the room. This enables spigot and ducting to remain parallel to ceiling joists and avoid kinks or sharp bends in duct.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>