Treevol Furniture WHFP004 Dresser Maldus Installation Guide
- September 12, 2024
- Treevol Furniture
Table of Contents
WHFP004 Dresser Maldus
“`html
Specifications
-
Product: Three Drawer Dresser
-
Tools Needed: Phillips head screwdriver, Flat head screwdriver,
Hammer -
Additional Tools: A flat, smooth surface (cardboard or rug),
Electric screwdriver (optional)
Product Usage Instructions
1. What will you need?
Hi! My name is Armando, and I’ll be with you while you assemble
this cabinet.
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard or rug)
- An electric screwdriver isn’t necessary but can make the work
easier.
2. Where should you start?
This is crucial! Ensure that the panel and hardware content for
the cabinet is correct and in good shape before starting the
assembly.
3. What’s in the hardware bag?
Be careful not to lose any items from the hardware bag as they
are essential for assembling your cabinet.
-
* Wood dowel x26- Spreading bolt x42
- Minifix cam x42
- Cover caps x42
4. How do the dowels and Minifix system work?
Follow these steps when using dowels and the Minifix system:
- Wood dowels:
1. Put the dowel inside the indicated hole.
2. Gently hit the dowel until it’s fully inside to adjust the joint.
- Minifix system:
1. Insert the Minifix cam with the arrow pointing towards the drilling on the panel’s edge.
2. Secure the joint by turning the spreading bolt.FAQ
How much weight does the cabinet resist?
The weight capacity of the cabinet is provided in the manual.
Please refer to page 16 for details.
Any recommendations for taking care of the cabinet?
For tips on caring for your cabinet, please refer to page 17 of
the manual.
“`
ASSEMBLY INSTRUCTIONS
THREE DRAWER DRESSER
It’s much better if you get some company for this!
LOT N°
Index
What will you need?
2
Where should you start?
3
What’s in the hardware bag?
4
How do the dowels and Minifix system work?
(We also explain what they are)
5-6
Let’s start assembling!
7
How much weight does your cabinet resist?
16
Our last recommendations for taking care of your cabinet
17
What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.
Phillips head screwdriver Flat head screwdriver Hammer
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier
🙂
2
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1 E – x2 I – x3 M – x1
B – x1 F – x1 J – x3 N – x1
C – x1 G – x3 K – x1 O – x3
D – x2 H – x3 L – x1 P – x2
3
What’s in the hardware bag?
Wood dowel
x26
Spreading bolt
x42
Minifix cam
x42
Cover caps
x42
2″
1″
Drywall screw
x18
Back panel guide
x1
Flat head screw
x6
Drywall screw
x12
2″
Slides + screws
x3
Nail-on glide
x8
Back Panel Support
x6
Wall anchor + screw
x2
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.
4
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
When joining two
1
Put in the dowel
2
inside the indicated
panels together, don’t forget to gently hit
hole and softly hit it
the panels to adjust
until it’s fully inside.
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
1
small arrow
This is a Minifix cam.
3
It has a little arrow on its
upper surface.
This is a spreading bolt. You should put it with the black plastic part facing down.
2
You should insert these cams
with the little arrow pointing towards the drilling on the
4
panel’s edge (shown on the
left).
After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.
5
1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
Ex2
F
2
Dx2
K
6
4
Drawer slides installation (apply for steps 5 and 8)
To begin, you must take out the smaller part of the slide, pushing down the
black plastic part shown below:
Take the bigger part of the slide and place it over the panel. The plastic
stop shoud gotowards the back.
2
11
B
Front Frente
5
Flat head screw
D K
7
6
E
E
F
D
D B
7
2
11
If you want to recall how to
install this part of the slides,
go to the 5th step again.
C
8
8 C
E
E
D
F
D
B
9 Slide the back panel inside the grooves.
Turn over the cabinet
Very carefully!
Back Panel Guide
1
P
P
2 PP
PD
P
C
F
B
K D
9
10
A
11 A
C E
D
P
B
P
D
10
12
Back View
D
P
P
D 1P
A D
Flat head
B
screw
P
P
2
P
D
Insert the back panel supports
Fix the back panel supports
between the gove and the back panel. whit 3/4″ flat head screws.
13
Fix your cabinet to the wall
1 On the wall, measure and mark the points shown below. 2 Drill on the
markings with a 5/16″ drill bit. 3 Insert the wall anchors inside the
drillings. 4 Place the cabinet and secure it with the screws.
6,02″ 15,3
21,41″ 54,4
6,02″ 15,3
6,5
2,6″
D
*Dimensions in inches
73,5
28,93″
11
14
Flat head screw
Hx3 Gx3 Jx3
15
Ix3
12
16 x3
H
I
O H
G
17 x3
Drywall screw 2″
G
O
H
J
G
13
18
L M
N
19 G
I
O H
II
M
G
O
H
N
G
I
O
H
L
14
20 21
1″
Flat head screw Tornillo lámina
OJ
N
G
O J
L
O J
M
G G
A
G O
G
L
H
O M G
O N
C H H
Slide the drawer inside the cabinet.
After adjusting all the Minifix cams, cover
them up with the cover caps.
A
After finishing the assembly, lift off al the
adhesive letters.
15
How much weight does my cabinet resist?
44-20
10-22
10-22
10-22
*pounds – Kg
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone. Be specially careful with the kids.
16
Taking care of your cabinet:
Do not paint the cabinet.
The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads)
Do not hit or hammer the cabinet (only when indicated here).
Clean it with thinner, a soft soap solution or simply a damp cloth.
Don’t drag the cabinet, lift it up with other people.
Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
A D
B
P
P
E
E
C
K D
F
I
G
O
I
G
J
H
L
O
I
G
J
H
M
O
J
H
N
17
WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 31 year warranty coverage in wooden parts and 1 year warranty
coverage in hardware pieces since its manufacturing date, which you can see in
the lot number printed on the product box and the assembly instructions
leaflet. Warranty covers materials and workmanship imperfections which impair
the assembly or correct functioning of the cabinet. This warranty is not valid
if the defects or imperfections are caused by the incorrect following of the
assembly instructions, warnings and recommendations, misuse, intentional
damage, fire or flood, or after modifications or any kind of alteration, or
repaired by someone not authorized, when it´s been assembled 3 months after
the date of purchase. These defects MUST be reported before the warranty
coverage period ends. Once the product has been assembled, the company will
not be responsible for defective and/or damaged parts. This warranty is ONLY
valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been
resold, rented, etc. Furniture will take no liability for incidental or
consequential damages caused to or by the product (This may not apply in your
state). To make this warranty valid you must write to our customer service
email describing the product defect, lot number and submitting your sales
reciept or proof of purchase, or contact us at our customer service line.
Replaced parts will be under the product´s original warranty coverage period.
Damaged parts will become property of the company. There are no other
warranties applicable to this product.
18