SureCall Fusion2Go 5G OTR Single Booster Designed for Large Vehicles User Manual

Fusion2Go® 5G OTR
High-Performance Over-the-Road 5G Signal
Booster Designed for Large Vehicles
User Manual 04.16.2024

Fusion2Go 5G OTR Single Booster Designed for Large Vehicles

SureCall Fusion2Go 5G OTR

Congratulations you have purchased the most advanced and future-friendly vehicle booster available in Canada. Your booster amplifies 60% more 5G spectrum than any other vehicle booster with higher uplink power and lower noise – providing you with faster data and greater network connectivity.
If you have any questions during setup, please reach out to our US-based experienced support technicians:

• Call: 1-888-365-6283
• Email: support@surecall.com

OVERVIEW

How It Works
The SureCall Fusion2Go 5G OTR is a high-performing bidirectional booster that enhances cellular signals for vehicles.
The Fusion2Go 5G OTR works with two antennas:

• An inside antenna that communicates with your cell phone.
• An outside antenna that communicates with the cell tower.

Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your cell phone via the inside antenna. When your phone transmits, the signal is sent to the inside antenna, and then sent to the cell tower via the outside antenna.

Package Contents

• Unpack all package contents. For missing or damaged items, contact your reseller.
• Turn over the signal booster and record the model and serial number for reference:

Serial #: ____
Purchase Date:

Keep the carton and packing material to store the product in case you need to return it.
Your Fusion2Go 5G OTR signal booster package includes the following items:

Before Installation

Select a location on your vehicle for the outside antenna. Multiple placement and height configurations are available to achieve the best configuration for your specific vehicle needs.
The antenna can be mounted on any truck, with or without an existing antenna mounting point. For vehicles without built-in mounting points, the antenna uses a 3/8 x 24 thread mount designed to accommodate many available 3rd party CB mounts.
A 2-clamp mounting bracket is provided for use on a mirror rail or other existing vehicle rails.
Additionally, an extension pole is also provided. Note, it is needed only to achieve the clearance requirements for the antenna specified below.
Thread glue is provided with the antenna. It should be applied at each threaded connection only after you have confirmed the proper height configuration as the glue will make the connection permanent.
Keep in mind, the antenna mounting location should:
(a) allow the antenna to extend above the metal cab (b) be at least 6 inches away from any windows (c) provide at least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna.

A “soft installation” should first be performed by assembling the truck antenna (WITHOUT GLUE) and routing the cable through an open window. After completing the remaining installation steps and successful operation is verified, proceed with permanent installation.

INSTALLATION

Step 1: Install the Outside Antenna
Once you have determined the mounting location, assemble the antenna parts by routing the cable through the mast extension (if used) and through the cable exit adapter.
If using the provided mounting bracket , we recommend installing the spring base and mounting bracket before adding the remaining assembly.

Install mounting bracket
Secure bracket to vehicle rail as shown using provided hardware. Secure all four bolts in place and secure with a wrench.

Secure the assembled antenna to the mounting bracket
Assemble the spring base and mounting bracket by placing the threads through the opening of the mounting bracket as shown in the illustration. Use the provided washers on the bottom side of the bracket opening thenadd the nut to bottom of the thread to secure in place.
Once complete, connect the assembled antenna and the spring base.

Route cable
Once the antenna installation is complete, route the antenna cable inside the vehicle. To hide the cable, Route cable from outside to the inside of the cabin under headliner and trim to the desired booster location on the floor of the vehicle.
If additional cable length is needed, optional 5 ft extension cable has been provided.

Note: The outside antenna must not be collocated or operating with any other antenna or booster.

Step 2: Install the Inside Patch Antenna
Identify a location for the inside antenna on or near your front dashboard that is

1. Within 2-3 feet of the typical cell phone location
2. At least 8 inches (20cm) from cellular devices and
3. At least 4 inches (10cm) from metal

Next, peel Velcro backing and apply to a clean dry surface in your chosen location.

Step 3: Place Booster and Connect Cables
Select a well-ventilated location for the booster that is away from excessive heat , direct sunlight, and moisture. We often suggest installing beneath a seat or within the front console.
Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from inside patch antenna to the connection marked INSIDE. Tighten the connections and wrap up any loose cable.

Step 4: Connect Power
Once antenna connections are complete, connect the DC power cord connector to the signal booster. The Power LED on the signal booster will illuminate to indicate it is receiving power and is ready for use.
Note: Fusion2Go 5G OTR is also compatible with AC power adapter cable for added versatility – part # SC-AC-59V28A-B.

Verify Your System is Working
Place a call in a location where you previously experienced poor cell service and confirm that your phone is receiving a boosted signal.

• Verify the two antennas have sufficient separation/isolation from the other another.
• Verify the outside antenna has sufficient clearance above any metal objects and has at least 12 inch radius from other radiating elements, such as a radio antenna.
• Consider: Resolving the issue may require moving the outside antenna further from the vehicle cabin and/or increasing the vertical placement of the outside antenna. If you have not used the optional mast extension, try adding it to achieve additional separation.

POWER LED
During initialization, the LED will briefly flash YELLOW/RED. This is part of normal operation. Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Normal operation is indicated a GREEN LEDs. In the event RED LEDs appear, antenna adjustments may be needed.

dB.
Increased antenna separation is recommended. Adjust the location of your outside and/or inside antenna to maximize the distance between them.
Solid RED| Alert – Oscillation detected| Indicates that oscillation has caused the booster to shut off,
Antenna repositioning is needed. Verify that there is sufficient separation between the outside and inside antennas, as well as any potentially interfering objects or antennas.

WARNING: The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster and/or cause personal injury.

TROUBLESHOOTING

Connect the power supply to an alternate power source.
Verify that the power source is operational and the fuse is intact.
If it remains OFF, contact tech support at: 1-888-365-6283 or support@surecall.com
After completing installation, signal has not Improved| Verify that cable connections are tightly fitted to the booster. Try further separating the antennas.
Note: Bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place and hold a call.

SPECIFICATIONS

1710-1780 / 2500-2570
Downlink Frequency Range (MHz):| 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2180 / 2620-2690
Supported Standards:| 5G, 4G LTE cellular standards
Cellular Bands:| 12 / 17 / 13 / 5 / 2 / 25 / 4 / 66 / 7
Input / Output Impedance:| 50Ώ
Maximum Gain:| 50 dB
Gain Adjustment:| 20 dB (Automatic)
Maximum Uplink Power| 27.5 dBm
VWSR:| ≤ 2.0
DC Power:| 6-15V
Maximum Output Power:| 1 Watt EIRP
Exterior Cable:| RG-58 / 15 ft
Interior Cable:| 302 series / 10 ft
RF Connectors:| FME Male (both ends)
Power Consumption:| ≤ 12W
Operation Temperature:| -4° to +158° F
Dimensions:| 5.625 x 4 x 1.125 inches
Weight:| 1.43 lbs
Certification:| IC: 7784A-FUSION2GO5G
Contains: 8595A-NINAB1

Note: The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.

Antenna Kitting Information

SC-111W and 302-3
(10 ft)| 1.8| 1.8| 2| 3.5| 2.2| 3| 2.5
Outside Antenna and Cable| SC209W and LMR100 (12.5 ft)| 1.58| 1.58| 2.58| 2.48| 2.30| 2.20| 2.58
SC-550W and RG-58U (10 ft)| 1.3| 1.3| 1| 0.7| 0.8| 0.5| 0.6
SC-550W-1 and RG-58U (15 ft)| 0.7| 0.7| 0.3| -0.5| -0.2| -0.9| -0.9
SC-200W and SC-174 (10 ft)| -2.3| -2.3| -2.3| -5.8| -3.98| -5.96| -6.96
SC-203WN and RG-58U (17 ft)| 1.3| 1.2| 1| 1.6| 1.7| 0.1| -0.4
SC-208W and 302-3 (12.5 ft)| -0.95| 0| 1| 1.5| 0.3| -0.3| -0.13

*All equivalent antennas and cables are suitable for use with the Fusion2Go 5G

MHz
Marine (Non-integrated cable)| | | | | | |
Inside Antenna| SC548W| 5| 5| 6| 7| 7| 7| 7
SC302W| 2.5| 2.5| 3| 5| 4| 5| 4
Inside Cable| SC240-20FN (20 ft)| -2.06| -2.06| -2.29| -3.56| -3.36| -3.76| -3.8
Outside Antenna| Galaxy 5412-P| 3| 3| 3| 4| 4| 4| 4
SC588W| 3| 3| 3| 4| 4| 4| 4
Outside Cable| SC240-40FN (40 ft)| -3.52| -3.52| -3.98| -6.52| -6.12| -6.92| -7.08
SC240-20FN (20 ft)| -2.06| -2.06| -2.29| -3.56| -3.36| -3.76| -3.84
Desktop / RV (Non-integrated cable)| | | | | | |
Inside Antenna| SC120W| 1.2| 1.2| 1.2| 3| 3| 3| 3
Inside Cable| SC240-40FN (40 ft)| -3.52| -3.52| -3.98| -6.52| -6.12| -6.92| -7.08
Outside Antenna| SC588W| 3| 3| 3| 4| 4| 4| 4
Outside Cable| SC240-40FN (40 ft)| -3.52| -3.52| -3.98| -6.52| -6.12| -6.92| -7.08

*All equivalent antennas and cables are suitable for use with the Fusion2Go 5G

WARNING: The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster and/or cause personal injury.

| PreAGC
---|---
| Pulse GSM
Frequency| Input| Output| Gain
(MHz)| (dBm)| (dBm)| (dB)
Uplink: 698-716| -21.9| 26.4| 48.3
Uplink: 777-787| -20.2| 27.5| 47.7
Uplink: 824-849| -19.5| 26.6| 46.1
Uplink: 1710-1780| -20.6| 25.8| 46.4
Uplink: 1850-1915| -19.4| 25.9| 45.3
Uplink: 2500-2570| -19.5| 25.6| 45.1
Downlink: 728-746| -41.0| 4.8| 45.8
Downlink: 746-757| -43.5| 3.3| 46.8
Downlink: 869-894| -43.4| 3.7| 47.1
Downlink: 2110-2180| -39.6| 5.7| 45.3
Downlink: 1930-1995| -39.8| 5.3| 45.1
Downlink: 2620-2690| -42.5| 3.4| 45.9

CONSUMER GUIDELINES

This is a CONSUMER device
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider ’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network . If you are unsure, contact your provider.
In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05¹
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e. MUST NOT be installed within 20 cm of ) any person.
You MUST cease operation of this device immediately if requested by the FCC (or ISED in Canada) or a licensed wireless service provider.
WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device.

Register your cellular booster with your wireless carrier at the following urls:
Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal- booster.html
AT&T: https://securec45.securewebsession.com/attsignalbooster.com/
T-Mobile: https://support.t-mobile.com/docs/DOC-9827
Sprint: https://www.sprint.com/legal/fcc_boosters.html
U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster- registration.jsp

CAN ICES-3 (B)/NMB-3(B) (Canada) :
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The Manufacturer ’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present , the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.

1 For details on the requirements specified in ISED CPC-2-1-05, visit: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html

THREE-YEAR PRODUCT WARRANTY

Register at www.SureCall.com/Activate
SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.
Products returned by customers must be in their original, un-modified condition, shipped in the original or protective packaging with proof-of- purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container.
Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. ( The Buyer does not need to include accessories sold in addition to the signal booster, such as antennas or cables.)
This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect , or mishandling that alters or damages the product ’s physical or electronic properties.
SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workmanship, and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at SureCall’s option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014 or TWO YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material and/or workmanship. Warranty returns must first be authorized in writing by SureCall. Disassembly of any SureCall product by anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products.
As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United States, in which case the Buyer will pay the shipping charges.
The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to meet the applicable specifications or which are not defective or not covered by this warranty.
Products sold by SureCall shall not be considered defective or non-conforming to the Buyer ’s order if they satisfactorily fulfill the performance requirements that were published in the product specification literature, or in accordance with samples provided by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it.

Limitations of Warranty, Damages and Liability:
EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING.
SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL SURECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED.
All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Association, and judgment upon the award rendered may be entered in any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof.
SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers. SureCall shall not be held liable to anyone for any indirect , special or consequential damages due to omissions or errors. The information and specifications in this document are subject to change without notice.
© 2022 All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners.

www.SureCall.com
1-888-365-6283
support@surecall.com
48346 Milmont Drive
Fremont, California 94538, USA
888.365.6283
www.surecall.com

References

• Cell Phone Signal Boosters | Get Better Cell Signal | SureCall
• Activate Your SureCall Warranty
• FCC Booster Registration | UScellular
• Wireless | T-Mobile Support
• T-Mobile® Official Site: Get Even More Without Paying More

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>