HPC TOR-MLFPK18-SQ-FLEX Match Lit Fire Pit Insert Instruction Manual
- June 15, 2024
- HPC
Table of Contents
HPC TOR-MLFPK18-SQ-FLEX Match Lit Fire Pit Insert
Product Description
YLNO ESU ROODTUO-DEIFITREC ASC ESU LAITNEDISER DNA LAICREMMOC ROF
IS WEIV ED
LEETS SSELNIATS 403 :LAIRETAM
PARTNUMBER|
DIMENSION CHART
---|---
PAN| STANDARD BTU| A”| STND FLEX LINE LENGTH
PENTA| TORPEDO
TOR-| MLFPK18-SQ-FLEX| 18″X18″| 12″| 65K| 45″| 36″
TOR-| MLFPK24-SQ-FLEX| 24″X24″| 18″| 65K| 54″| 36″
TOR-| MLFPK30-SQ-FLEX| 30″X30″| 18″| 65K| 54″| 36″
NOYE -ROT DDA SRENRUB ODEPROT ROF*
-
PROPER VENTING
- ENCLOSURES:
- For Fire Pit Inserts upto 65K BTU: Required 2 vents, 18 sq.in. each on opposing sides.
- BOWLS (Copper, concrete or metal) – Bowl to be raised above mounting surface minimum of 3/4″ gap; Bowl to have a minimum of 6″ diameter hole in bottom
-
GAS SUPPLY
- Natural Gas: Supply Pressure: Minimum: 3.5″ W.C.; Maximum: 7.0″ W.C.
- LP Gas: Supply Pressure: Minimum: 8.0″ W.C.; Maximum 11 .0″ W.C.
IMPORTANT: Ensure any flex line that may be used from the permanent main fuel supply to the product is rated to the stated max btu of the product and certified to ANSI Z21 .75*CSA 6.27.
-
MODIFCATION OF PRODUCT Will VOID ANY CERTIFICATION ANID WARRANTY.
-
FOLLOW All MANUFACTURER INSTALLATION INSTRUCTIONS AND LOCAL CODES.
-
ALL DIMENSIONS ARE CONSIDERED TRUE AND REFLECT MANUFACTURER’S SPECIFICATIONS AS OF THE REVISION DATE.
-
DO NOT SCALE DRAWING.
-
THESE DRAWINGS ARE FOR SIZING AND PLANNING PURPOSES. All INFORMATION CONTAINED HEREIN WAS CURRENT AT THE TIME OF DEVELOPMENT. THE MANUFACTURER’S RESPONSIBLE FOR THE ACCURACY OF THE DRAWING.
-
CONTRACTOR’S NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.CADdetails.com/info
REFERENCE NUMBER 771-010
ISOMETIRIC WEIV
BRACKT DETAIL
HEARTH PRODUCTS CONTROLS 2225 LYONS RD.
MIAMISBURG, OH 45342 TOLL FREE: 877.585.9800 PHONE: 937.436.9800
www.hpcfire.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>