FORTIN EVO-ONE Lexus Remote Starters Installation Guide

: September 12, 2024
: FORTIN

Table of Contents

FORTIN EVO-ONE Lexus Remote Starters
Product Usage Instructions
DESCRIPTION
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FORTIN EVO-ONE Lexus Remote Starters

Product Specifications :

Model: EVO-ONE
Vehicle Compatibility: Lexus ES350 Push-to-Start 2019
Firmware Version: 79.[66]
Manufactured After: 2019
Compatible with Toyota/Lexus vehicles

Product Usage Instructions

Installation:

Ensure the vehicle is compatible with the EVO-ONE module based on the model and year.
Use the provided wiring connection guide to connect the module to the vehicle’s system.
Install the hood pin switch if required for remote start functionality.
Make sure to follow the mandatory installation instructions to prevent damage.

Programming Options:

Program the bypass option as needed using the UNIT OPTION settings.
Set up the remote starter option for OEM remote start functionality.

Operating Instructions :

Use the OEM remote to lock, unlock, arm, disarm, or remote start the vehicle (if enabled).
Monitor vehicle status including door, trunk, hood, hand-brake, foot-brake, and parking lights.

Safety Precautions:

Ensure the module is installed by a qualified technician to avoid damage to the vehicle.
Follow all wiring connections carefully to prevent any electrical issues.

Frequently Asked Questions (FAQ):

Q: What should I do if my vehicle does not start remotely?
A: Check the hood pin switch installation and ensure the hood status setting is correct (Function A11 set to OFF).
Q: Can I use the OEM remote for remote start?
A: Yes, you can enable remote start with the OEM remote by pressing Lock 3 times. Key takeover is not supported during this process.
Q: How can I update the firmware version?
A: Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately, to add firmware updates and options to the module.

REVREV.: 2024

REGULAR INSTALLATION

SUGGESTED WIRING

| COMPATIBLE MODULE REQUIRED:| QR CODE ON THE LABEL| FIRMWARE VERSION VERSION LOGICIELLE|

To add the firmware version and the options, use the
FLASH LINK UPDATER or FLASH LINK MOBILE tool,
sold separately.

---|---|---|---|---
MANUFACTURED

AFTER: 2019

MODULE COMPATIBLE

REQUIS:

| CODE QR SUR L’ÉTI- QUETTE| 79.| [ 66 ]
2019| TOYOTA/ LEXUS| MINIMUM

| Program remote starter option for R.S.| FUNCTION FONCTION| MODE| DESCRIPTION
---|---|---|---|---
| |
OEM REMOTE STAND
ALONE : | 38| 2| Enable
Press 3x Lock to remote start with the OEM remote.
Active

NOTES

The vehicles OEM remote and SmartKey are still operable during remote start.
NO KEY TAKEOVER

MANDATORY INSTALL

HOOD NON
PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE
REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF
SECURITY STICKER
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

This guide may change without notice. See www.fortin.ca for latest version.

DESCRIPTION

ECU, Driver’s side ECU,

WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

1x FLASH LINK UPDATER, 1x FLASH LINK MANAGER
SOFTWARE
Microsoft Windows Computer with Internet connection
FLASH LINK MOBILE
FLASH LINK MOBILE APP
Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

Press and hold the programming button:
Insert the 6-Pin Main connector.
The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.\
Insert the required remaining connectors.
Do not press the brake pedal.
Press the Push-to-Start button twice to turn on the ignition.
Wait for the BLUE LED to flash rapidly and constantly.
Press the Push-to-Start button once to turn off the ignition.
The BLUE LED will turn off.
Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector. 4-pins (Data-Link).
Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the Cryptor menu.
*Parts required (not included)
AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (Main-Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.
REMOTE STREMOTE STARTER

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

All doors must be closed
Remote start the vehicle
Unlock the doors with either:
- The OEM remote
- The remote-starter remote
- Or the proximity remote
The module will shut down the vehicle as soon as the drivers door is opened
Enter the vehicle with the Smart-Key.
Enter the vehicle with the Smart-Key.
Enter the vehicle with the Smart-Key.
The vehicle can now be put in to gear and driven
Notice: Updated Firmware and Installation Guides
Updated ﬁ rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest ﬁ rmware and download the latest installation guide(s) prior to the installation of this product.
Module label

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualiﬁed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com

WEB UPDATE