Dongguan 2BEKV-V18 Car DVR Dash Cam User Guide

Dongguan 2BEKV-V18 Car DVR Dash Cam

Product Information Specifications

• Model: WIFI Hidden Dashcam
• TFT: 2-inch TFT display
• Memory Card: Supports Class 10 TF cards from 8GB to 128GB
• Power Input: 12V DC
• Installation: Original safe box connection

Installation Instructions

1. Locate the positive pole and GND.
2. Install the dashcam in its original position.
3. Connect the dashcam to the original safe box. Refer to the provided wiring diagram for proper connections.

Product Usage Instructions

Connecting to WIFI
To connect to WIFI, follow these steps:

1. Open the WIFI settings on your phone.
2. Connect to the hot spot created by the DVR (Dashcam).
3. Ensure that the connected WIFI network matches the one configured in the recorder.

Using the Mobile App
To use the mobile app, follow these steps:

1. Download and install the “My Dash Cam” app from the app store.
2. Launch the app on your phone.
3. Tap on “Enter” to access the dashcam.
4. You can now view the live feed from the dashcam or access the local album.
5. Explore additional options by tapping on “More”.

Recorder Settings
To access the recorder settings, follow these steps:

1. Open the mobile app and connect to the dashcam.
2. Tap on “Setting” to access the recorder settings.
3. Adjust the settings according to your preferences.

QR CODE

Installation instructions

• Turn off the car engine.
• Insert the TF card into the recorder card slot correctly. [Note] Please use a high-speed TF card (Class 10 or above), not less than 8GB, the maximum support is 128GB.
• Connect the yellow power cable to the 12V power supply, the red ACC ignition control cable, and the black ground to start the engine. The light is blinking and the machine starts to enter the recording state.

shows WIRING DIAGRAM

APP

1. For the first time, please scan the QR code below with your mobile phone to download the APP
2. After turning on the car to make the recorder start-up and enter the working state, find it in the phone Settings“LNKJ_Enter the password 12345678 to connect
3. After the connection is complete, enter the APP, and the recorder time will be synchronized with the current phone time,In addition, you need to enter the recorder Settings option to select: “Format SD card”. Once connected to the hot spot, turn the Six-frame probe back on, Click to enter the recorder connection

Open the phone wifi. Connect the hot spot on the DVR. Ensure that the connected wifi is consistent with the WiFi in the recorder.

After connection, the following interface will be displayed. Operate it according to the function that you need.

FCC warning statements

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

• This device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements This equipment complies with FCC radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

FAQ

Q: Can I modify the device without voiding the warranty?

A: No, any changes or modifications not explicitly approved by the manufacturer may void your warranty.

Q: Does this device comply with the FCC regulations?

A: Yes, this device complies with part 15 of the FCC Rules.

Q: Can the device cause harmful interference?

A: No, the device is designed not to cause harmful interference.

Q: Is there a minimum distance requirement for operating the device?

A: Yes, it is recommended to maintain a minimum distance of 20cm between the radiator and your body during installation and operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>