FORTIN EVO-ALL Immobilizer Bypass System Installation Guide

: September 11, 2024
: FORTIN

Table of Contents

FORTIN EVO-ALL Immobilizer Bypass System
Specifications
FAQs
Vehicle functions supported
MANDATORY INSTALL
AUTOMATIC TRANSMISSION WIRING CONNECTION
DECRYPTOR PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
CONTACT INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FORTIN EVO-ALL Immobilizer Bypass System

Specifications

Model: EVO-ALL
Compatibility: Ford F250 / F350 / F450 / F550 vehicles with
Push-to-Start feature (2023 models)
Firmware Version: 58.06

FAQs

Q: What should I do if the remote start is not working?
- A: Check if the hood is closed, and the hood pin switch is present, and verify that the vehicle meets the specified conditions for remote start operation.
Q: Can the remote start be used multiple times in succession?
- A: The remote start function is limited to two consecutive Start or Stop commands. Re-engage by cycling the ignition ON and OFF.

Vehicle functions supported

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

NOTES

The vehicle’s OEM remote will still be operable during remote start.

MANDATORY INSTALL

HOOD PIN
- HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
- Notice: the installation of safety elements is mandatory. The hood pin is an essential security element and must be installed. THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE..

NOTES
THE REMOTE START WILL NOT OPERATE IF:

CAUTION

The remote start is limited to two consecutive commands Start or Stop.

To use the remote again ignition must be turned ON and OFF.

AUTOMATIC TRANSMISSION WIRING CONNECTION

DECRYPTOR PROGRAMMING PROCEDURE

KEY BYPASS PROGRAMMING PROCEDURE 2/2

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.

MODEL: EVO-ALL
DATE: 02/2019 FORTIN.CA
SN: 000000 00000
MADE IN CANADA
© 2018 ALL RIGHTS RESERVED

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it.
Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever for the accuracy or currency of the information supplied.
The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly, or in any other way.
Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects.
This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice.
Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING