DBK CCC01 Cylinder Head Slider Kit Instruction Manual
- September 9, 2024
- DBK
Table of Contents
SLIDER COVER TESTE – HEAD COVER SLIDER
art. CCC01
DBK recommends to have the installation done by a specialized mechanic
MADE IN ITALY
N. – COD. Qt.
(1) – CCC01-SX 1
(2) – CCC01-DX 1
Tools
DX SX
See workshop manual for tightening torques
a: REMOVE OEM
b: OEM
DX SX
- STEP 1 – INSERT THE REAR FIXING INTO THE SEAT
- STEP 2 – PRESS IN THIS POSITION UNTIL THE HOLES ALIGN,THEN PROCEED TO INSERT THE SCREW AND TIGHTEN
- OEM
Terms of use, necessary precautions and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are
designed and meant to be used only in private roads closed to the public
traffic or for a racing use in closed tracks, they are not therefore provided
with homologation.
Customers buying the above mentioned products, which intend to use them on a
public street, must require in advance the homologation (or an updated
registration) to their country’s competent authority, otherwise, they
acknowledge to be in breach of the law of the country in which they are using
the above mentioned products and, consequently, they take charge of the
liability arising from the inappropriate use, thereon, the vendor takes no
responsibility in case of fine, penalty or damage which may occur to the
customer and user.
Installation and mounting:
Read and follow these instructions carefully, an essential part of the product. We recommend to have the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation. For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.
Cleaning and service:
All DBK products require regular inspection and maintenance. The greater their
use, the greater the frequency of checks must be. If you find any parts
missing, dama- ged, worn or with an irregular appearance, immediately consult
your DBK dealer before using the motorcycle. In any case, never try to repair
or modify DBK products or its parts, in any case replace with original DBK
components. DBK products may not be compatible with your motorcycle.
Do not use chemical products such as: alkaline degreaser or acids, for they
can be harmful to the anodized surface, use only mild soaps and avoid the
utilization of pressure washers.