DBK BRM08 698 Ducati Hypermotard Mono Handlebar Riser Kit User Guide

DBK BRM08 698 Ducati Hypermotard Mono Handlebar Riser Kit

Product Information

Specifications:

• Product Name: Handlebar Spacers HYPER 698 MONO
• Model : BRM08
• Origin : Made in Italy

Product Usage Instructions

Installation:

1. It is recommended to have the installation done by a specialized mechanic.
2. Ensure all parts are included in the kit.
3. Tighten the screws marked with number 1 first, then tighten the screws marked with number 2.
4. Use a torque wrench and tighten to 18 N.m (or 14 ft/lb).

Additional Notes:

• Before installation, watch the assembly video for guidance.
• Regularly inspect the fixings to ensure they are fully tightened.

DBK recommends to have the installation done by a specialized mechanic

PARTS

FEATURES

Tools

NOTE: Tighten pack coming before the screw marked number “1” then the screwmarked number “2”, use only the wrench and tighten a 18 N.m. or 14 ft/lb

N.B. IT IS RECOMMENDED THAT YOU VIEW ASSEMBLY VIDEO

WARNING : IT IS RECOMMENDED THAT PERIODIC INSPECTIONS ARE MADE TO ENSURE THAT ALL FIXINGS ARE FULLY TIGHTEN

Terms of use, necessary precautions, and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are designed and meant to be used only in private roads closed to public traffic or for racing use in closed tracks, they are not therefore provided with homologation. Customers buying the above-mentioned products, who intend to use them on a public street, must require in advance the homologation (or an updated registration) to their country’s competent authority, otherwise, they acknowledge to be in breach of the law of the country in which they are using the above-mentioned products and, consequently, they take charge of the liability arising from the inappropriate use, thereon, the vendor takes no responsibility in case of fine, penalty or damage which may occur to the customer and user.

Installation and mounting:

Read and follow these instructions carefully, an essential part of the product. We recommend that the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation. For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.

Cleaning and service

All DBK products require regular inspection and maintenance. The greater their use, the greater the frequency of checks must be. If you find any parts missing, damaged, worn or with an irregular appearance, immediately consult your DBK dealer before using the motorcycle. In any case, never try to repair or modify DBK products or its parts, in any case replace them with original DBK components. DBK products may not be compatible with your motorcycle. Do not use chemical products such as: alkaline degreaser or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.

FAQ

Q: Can I install the handlebar spacers myself?
A: It is recommended to have the installation done by a specialized mechanic for proper installation and safety.

Q: What torque should I use to tighten the screws?
A: Use a torque wrench and tighten to 18 N.m (or 14 ft/lb) following the specified tightening sequence.

Q: Are there any additional tools required for installation?
A: You may need a thread locker and wrenches of sizes ES = 6 – 8 for installation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>