DBK ROND03-C KTM Duke Exhaust Muffler Washer Installation Guide
- September 7, 2024
- DBK
Table of Contents
DBK ROND03-C KTM Duke Exhaust Muffler Washer
Product Information
Specifications:
- Product Name: Exhaust Terminal Washer
- Model: ROND13
- Origin: Made in Italy
- Torque Spec: 23Nm
Product Usage Instructions
Installation Kit Contents:
- 1 x ROND03-C
- 1 x TCE121
Tools Required:
Ensure you have the following tools before starting the installation:
- Tool 1
- Tool 2
Installation Steps:
- Step 1: Remove OEM part carefully.
- Step 2: Follow the detailed instructions provided in the manual for proper installation.
Note: For optimal performance and safety, it is recommended to have the installation done by a specialized mechanic.
FAQ (Frequently Asked Questions):
-
Q: Can I install the Exhaust Terminal Washer myself?
A: While it is possible to install it yourself, we recommend having a specialized mechanic perform the installation for best results. -
Q: What is the recommended torque specification for this product?
A: The recommended torque specification for the Exhaust End Washer is 23 Nm.
PARTS
ATTENTION: Bring the screws into place a little at a time, tighten to the indicated tightening torque.
Precautions and Disclaimer
Terms of use, necessary precautions and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are
designed and meant to be used only in private roads closed to the public
traffic or for a racing use in closed tracks, they are not therefore provided
with homologation. Customers buying the above mentioned products, which intend
to use them on a public street, must require in advance the homologation (or
an updated registration) to their country’s competent authority, otherwise,
they acknowledge to be in breach of the law of the country in which they are
using the above-mentioned products and, consequently, they take charge of the
liability arising from the inappropriate use, thereon, the vendor takes no
responsibility in case of fine, penalty or damage which may occur to the
customer and user.
Installation and mounting
Read and follow these instructions carefully, an essential part of the product. We recommend to have the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation. For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.
Cleaning and service
All DBK products require regular inspection and maintenance. The greater their use, the greater the frequency of checks must be. If you find any parts missing, damaged, worn or with an irregular appearance, immediately consult your DBK dealer before using the motorcycle. In any case, never try to repair or modify DBK products or its parts, in any case replace with original DBK components. DBK products may not be compatible with your motorcycle. Do not use chemical products such as: alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.
MADE IN ITALY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>