Treevol Furniture WHFP073 Tall Dresser Instruction Manual

September 7, 2024
Treevol Furniture

Treevol Furniture WHFP073 Tall Dresser

Specifications

  • Product: Tall Dresser
  • Assembly Required: Yes
  • Material: Wood
  • Color: Varies
  • Dimensions: Varies
  • Weight Capacity: Varies

Product Usage Instructions

  1. Assembly Instructions:
    Follow the step-by-step assembly instructions provided in the manual. Ensure to secure the furniture to the wall using an anti-tip device to prevent tip-overs.

  2. What Will You Need?
    Refer to the index in the manual to check the tools and materials required for assembly.

  3. Panel Quantity
    Check the manual for the quantity of panels included in the packaging.

  4. Hardware Bag Contents
    Review the contents of the hardware bag to ensure all necessary parts are available for assembly.

  5. Dowels and Minifix System:
    Understand how the dowels and Minifix system work as described in the manual before starting assembly.

  6. Let’s Start Assembling:
    Follow the numbered steps for assembling the dresser. Ensure to rotate and position components correctly as instructed.

  7. Drawer Slides Installation:
    Install drawer slides according to the provided instructions for smooth operation of drawers.

  8. Drawer Installation:
    Follow the steps to install drawers properly. Avoid overloading drawers with heavy items.

  9. Securing to Wall:
    To prevent tip-overs, follow the steps provided in the manual to secure the furniture to a wall using a tip-over device.

  10. Door Installation:
    Adjust hinges as needed for proper door alignment and functionality.

  11. Taking Care of Your Cabinet:
    Refer to the care instructions to maintain the quality and appearance of your tall dresser.

FAQ

  • Q: How much weight can my cabinet resist?
    A: The weight capacity of the cabinet varies based on its design and materials. Refer to the specifications or contact customer support for specific weight limits.

  • Q: Is it necessary to use an anti-tip device?
    A: Yes, it is crucial to secure the furniture to the wall using an anti-tip device to prevent tip-overs, especially in households with children or pets.

ASSEMBLY INSTRUCTIONS
TALL DRESSER

WARNING

Children have died from furniture tip over. To reduce the risk of tip over:

  • ALWAYS secure this furniture to the wall using an anti-tip device. NEVER allow children to stand, climb, or hang on drawers, doors or shelves.
  • Do not defeat or remove the drawer interlock system.
  • Place heaviest items in the lowest drawers.
  • NEVER put a TV on this furniture.

To ensure the safety of those using this cabinet, it is crucial to properly secure it to the wall using a tip-over device. This product includes the necessary items for fixing the furniture to the wall. However, it is important to note that incorrect installation or failure to use the tip-over device can result in serious injury or even death. For this reason, we highly recommend that a professional installer handle the installation of the cabinet to the wall.

What will you need?

A flat, smooth surface. You can use the cardboard of the box or a rug.

An electric screwdriver isn’t necessary, but it can make the work much easier 🙂

Where should you start?

This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this cabinet.
Please make sure that the quantity of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)

Panel quantity

What’s in the hardware bag?

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

How do the dowels and Minifix system work?

this is so important too!
Everytime you’re using one of these connectors during the assembly, you should follow these same steps.

Wood dowels
They are little wooden cylinders.

  1. Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
  2. When joining two panels together, don’t forget to gently hit the panels to adjust the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

  1. This is a Minifix cam. It has a little arrow on its upper surface.
  2. You should insert these cams with the little arrow pointing towards the drilling on the panel’s edge (shown on the left).
  3. This is a spreading bolt. You should put it with the black plastic part facing down.
  4. After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.

Let’s start assembling!

You can see the last page of this manual to have a full look of the panels of this cabinet.

To prevent furniture tip-overs, it’s important to properly install a tip-over device.
Here are the steps to secure the furniture to a wall:

  1. Open the Tip-over prevention device that came with the product.
  2. Measure the height of the furniture on the wall and mark it.
  3. Measure the distance from the top of the furniture to where you plan to attach the tip-over device.
  4. Using a stud finder, locate the studs in the wall behind the furniture. Mark their location with a pencil.
  5. Hold the tip-over device in place on the furniture, aligning it with the marked location on the wall. Mark the position of the screw holes on the furniture.
  6. Use a drill to make pilot holes in the furniture where you marked the screw holes.
  7. Secure the tip-over device to the furniture
  8. Attach the tip-over device to the wall, making sure the screws go into the studs.
  9. Test the tip-over device to ensure it’s properly installed by pushing and pulling on the furniture. If it’s secure, it should not tip over or shift.

Hinge adjustment

After adjusting all the Minifix cams, cover them up with the cover caps.

After finishing the assembly, lift off al the adhesive letters.

How much weight does my cabinet resist?

*weight in pounds

Congratulations!
It’s done But don’t go yet! There are some recommendations left for you to take care of your cabinet correctly from now on.

SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.

Taking care of your cabinet

  • Do not paint the cabinet.
  • The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
  • Clean the metallic hardware with a dry cloth. DO NOT overload the cabinet (see suggested loads)
  • Do not hit or hammer the cabinet (only when indicated here). Clean it with thinner, a soft soap solution or simply a damp cloth.
  • Don’t drag the cabinet, lift it up with other people. Avoid direct contact with water, fire or exposing it to high heat.

Cabinet panels

WARRANTY POLICY

Furniture has a 1 year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.
Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet.
This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.
This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc.
Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).
To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company.
There are no other warranties applicable to this product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Treevol Furniture User Manuals

Related Manuals