Treevol Furniture WHFP064 Dresser Instruction Manual

: September 8, 2024
: Treevol Furniture

Table of Contents

WHFP064 Dresser
Specifications
Product Usage Instructions
What You Will Need
Assembly Steps
Weight Capacity
Maintenance Recommendations

WHFP064 Dresser

“`html

Specifications

Material: Wood
Color: Varies
Dimensions: Varies
Weight Capacity: Varies

Product Usage Instructions

What You Will Need

Hi! My name is Armando, and I’ll be with you while you assemble
this cabinet.

Phillips head screwdriver
Flat head screwdriver
Hammer
A flat, smooth surface. You can use the cardboard of the box or
a rug.
An electric screwdriver isn’t necessary, but it can make the
work much easier 🙂

Assembly Steps

1. Where Should You Start?

This is so IMPORTANT!

Make sure to check the panel and hardware content for the
cabinet. Verify the quantity and condition of each item before
starting the assembly.

2. What’s in the Hardware Bag?

Be careful not to lose anything from the hardware bag as its
contents are necessary for assembling your cabinet.

Wood dowel x14
Spreading bolt x31
Minifix cam x31
Cover caps x30

3. How Do the Dowels and Minifix System Work?

This is so important too!

Wood Dowels:

Put in the dowel inside the indicated hole and softly hit it
until it’s fully inside.
Gently hit the panels to adjust the joint.

Minifix System:

Insert the Minifix cam with the little arrow pointing towards
the drilling on the panel’s edge.
Secure the joint by turning the spreading bolt.

4. Let’s Start Assembling!

You can refer to the last page of this manual to have a full
look at the panels of this cabinet.

Weight Capacity

The weight capacity of your cabinet may vary. Please refer to
the product specifications for more information.

Maintenance Recommendations

Follow our last recommendations for taking care of your cabinet
to ensure its longevity and durability.

FAQ

Q: How do I secure the cabinet to the wall?

A: It is crucial to properly secure the cabinet to the wall
using the provided tip-over device. We highly recommend
professional installation for this step.

Q: What should I do if any hardware item is missing?

A: If any hardware item is missing from the bag, please contact
customer support for assistance in obtaining a replacement.

“`

ASSEMBLY INSTRUCTIONS
DRESSER
! WARNING
Children have died from furniture tip over. To reduce the risk of tip over:
ALWAYS secure this furniture to the wall using an anti-tip device. NEVER allow children to stand, climb, or hang on drawers, doors or shelves. Do not defeat or remove the drawer interlock system. Place heaviest items in the lowest drawers. NEVER put a TV on this furniture.
To ensure the safety of those using this cabinet, it is crucial to properly secure it to the wall using a tip-over device. This product includes the necessary items for fixing the furniture
to the wall. However, it is important to note that incorrect installation or failure to use the tip-over device can result in serious injury or even death.
For this reason, we highly recommend that a professional installer handle the installation of the cabinet to the wall.

LOT N°

Index

What will you need?

2

Where should you start?

3

What’s in the hardware bag?

4-5

How do the dowels and Minifix system work?
(We also explain what they are)

6

Let’s start assembling!

7

How much weight does your cabinet resist?

20

Our last recommendations for taking care of your cabinet

21

What will you need?

Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

Phillips head screwdriver Flat head screwdriver Hammer

A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
2

Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity

A – x1 E – x3 I – x3

B – x1 F – x3 J – x3

C – x1 G – x3 K – x2

D – x1 H – x3 L – x1

3

What’s in the hardware bag?

Wood dowel
x14

Spreading bolt
x31

Minifix cam
x31

Cover caps
x30

2″

Cover caps
x5

Handle
x6

Flat head screw
x20

Drywall screw
x12

4

Corners Backet
x2

Wall fixing Kit + Screws
x2

H Profile
x1

Drawer slides + screws
x3

8×5/8 ”

Nail

Legs

Flat head

screw

x30

x4

x6

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet. 5

How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.

Wood dowels
They are little wooden cylinders.

When joining two

1

Put in the dowel

2

inside the indicated

panels together, don’t forget to gently hit

hole and softly hit it

the panels to adjust

until it’s fully inside.

the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1

small arrow
This is a Minifix cam.

3

It has a little arrow on its

upper surface.

This is a spreading bolt. You should put it with the black plastic part facing down.

2

You should insert these cams

with the little arrow pointing towards the drilling on the

4

panel’s edge (shown on the

left).

After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.

6

1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.
C
2
L
7

3

Turn over

L

the cabinet

very carefully!

C
4

D
8

5
D C
L
6
B
9

7
D C
B L
8
Flat head screw
A
Rotate
10

A
9
B C
D A
11

10 Drawer slides installation The wheel should go towards the front edge of the panel and facing down, like this:

Front

Down

4

10

C

11 Place the corner supports in the corners and screw with flat head screw 9/16″ 1

Corner Support
D

Flat head

1

Flat head screw 9/16″ screws 9/16″.

B A
B L A

D

C

Turn over the cabinet

very carefully!
1

12

12 13

KK

3mm
K K

A

C

Turn over the cabinet

very carefully!

3mm

Fx3 Gx3

13

14
Ex3
15
Ix3
14

16X3

17X3

I E

F I
E G

15

18X3 19

H I
E

Slide the back panel inside the grooves.
G

8×5/8 ”

Jx3

Flat head screw

16

20X3

I

J

H

E

G

21X3

Drawer Installation
The wheel should go on the rear part of the drawer.

I

H

E G

17

22

Slide the drawers inside the cabinet.

B

E J J J

G

D

G

18

23 To prevent furniture tip-overs, it’s important to properly install a tip- over device. Here are the steps to secure the furniture to a wall:
1 Open the Tip-over prevention device that came with the product. 2 Measure the height of the furniture on the wall and mark it. 3 Measure the distance from the top of the furniture to where you plan to attach the tip-over device. 4 Using a stud finder, locate the studs in the wall behind the furniture. Mark their location with a pencil. 5 Hold the tip-over device in place on the furniture, aligning it with the marked location on the wall.
Mark the position of the screw holes on the furniture..
6 Use a drill to make pilot holes in the furniture where you marked the screw holes. 7 Secure the tip-over device to the furniture. 8 Attach the tip-over device to the wall, making sure the screws go into the studs. 9 Test the tip- over device to ensure it’s properly installed by pushing and pulling on the furniture. If it’s secure,
it should not tip over or shift..

B

J

D

J

After adjusting all the Minifix cams, cover
them up with the cover caps.

A

After finishing the assembly, lift off al the
adhesive letters.

19

How much weight does my cabinet resist?
33
22
22
22
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.
20

Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun. Clean the metallic hardware with a dry cloth. DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the cabinet (only when indicated here). Clean it with thinner, a soft soap solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels

F

E

H

G

J

I

F

E

H

C G

J

I

F

E

H

G

J

I

B

L

K

D

A

21

WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 1 year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet. Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet. This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts. This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc. Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state). To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company. There are no other warranties applicable to this product.
22