ATEN VP1920 Presentation Matrix Switch User Guide

: September 10, 2024
: Aten

Table of Contents

Hardware Overview
Installation
Package Contents
Hardware Overview
Installation
Operation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VP1920
9 × 2 4K Presentation Matrix Switch
Quick Start Guide

Hardware Overview

Installation

Package Contents

1 VP1920 9 × 2 4K Presentation Matrix Switch
1 Power Cord
1 IR Receiver
1 IR Remote Control
1 User Instructions
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and specifi cations contained in this package are subject to change without prior notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information

http://www.aten.com/products/productItem.php?model_no=VP1920

http://www.aten.com/ext_libraries/manuals.php?n=vp1920

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Hardware Overview

Display Selection Pushbuttons
Source Selection Pushbuttons
Source LEDs
USB and Keyboard/ Mouse LEDs
Function Pushbuttons
Navigation Pushbuttons
Power Pushbutton
Source (1)
– VGA In
– Stereo Audio In
– HDMI In
– USB Type-B
Source (2)
– DisplayPort In
– HDMI In
– USB Type-B
Source (3)
– A/V In
– Comp In
– HDMI In
Source (4), (5), (6)
– HDMI In
Stereo Audio Out
Digital Audio Out
HDMI Out
USB Type-A
IR Receiver Port
RS-232 Serial Port
Power Socket
Power Switch
Grounding Terminal
On/Off
Source
Navigation
Display
Function

Installation

Use a grounding wire to ground the unit by connecting one end to the grounding terminal, and the other end to a suitable grounded object.
To connect sources:
(a) Use a VGA cable and a stereo audio cable to connect a VGA source to the VGA In and Stereo Audio In ports.
(b) Use HDMI cables to connect HDMI sources to the HDMI In ports.
(c) Use a DisplayPort cable to connect a DisplayPort source to the DisplayPort In port.
(d) Use RCA cables to connect a component or composite source to the Comp In or A/V In port.
Use HDMI cables to connect HDMI displays to the HDMI Out ports.
Connect your audio devices to the Stereo Audio Out or Digital Audio Out ports.
Connect a keyboard and a mouse to the USB Type-A ports to access computer 1 or 2.
Connect USB peripherals to the USB Type-A ports to be controlled by computer 1 or 2.
To configure the settings via an RS-232 interface, connect a hardware or software controller.
Connect the IR Receiver to the IR Receiver Port for IR remote control.
Plug the Power Cord to the Power Socket and put the Power Switch to ON.
Power on any connected devices.

Note:

Do not omit this step. Proper grounding helps to prevent damage to the unit from surges or static electricity.
Source 1, 2, and 3 can each receive more than one video input, but can only display one video source at a time.
If you only have one display, connect it to Display A where the OSD menu displays.
By default, the connected speakers output the audio from the same source that shows on Display A.

Operation

Front-panel Pushbuttons

To select a source, press the Display Selection Pushbutton, and then press the Source Selection Pushbutton that corresponds to the input you wish to display.
To lock or unlock the front-panel pushbuttons, press and hold the Up Pushbutton for two seconds. When the front panel is locked, the lock icon ( ) lights red.

IR Remote Control Unit
To select a source, press the Display Button to focus a display, and then press the Source
Button that corresponds to the source you wish to output.
RS-232 Serial Interface
The built-in bi-directional RS-232 serial interface allows system control through a high-end controller, such as a computer.
© Copyright 2024 ATEN
International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their respective owners.
Part No. PAPE-1223-J71G Released: 08/2024