VORTEX M-00244-1 Holographic Sight Instruction Manual
- September 6, 2024
- VORTEX
Table of Contents
VORTEX M-00244-1 Holographic Sight
SPECIFICATIONS
MAGNIFICATION X OBJECTIVE L EN S D I AMETER|
8×32
|
10×32
|
8×4
|
2 10×42
|
1Dx50
|
12×50
|
1h56
---|---|---|---|---|---|---|---
LINEAR FIELD 472′
OF VIEW (144m
l@l000YAR0SJ
| 388′
) 1118m)
| 410
1118m
| 346′
) (105m)
| 341′ (104m)| 188′
188ml
| 194′ (59m)
ANGULAR FIELD 9. o·
OF VIEW
| 7.4′| 8. o·| 6.6′| 6.5′| 5_5•| 3.7′
CLOSE FOCUS
| 5.9′
(18ml
| ,_5• (Um)| 6.6′
(10ml
| 10.0′ (3.0m)
EYE RELIEF **** 19.0m
|
m 17.0mm
|
16.7mm
|
18.0mm
|
17.0mm
|
18.0mm
INTERPUPILURY DISTANCE|
55mm- 75mm
|
56mm- 76mm
O I OPTERRANGE **** :t6.0
|
:t8.0
|
:t2.0
| 3.0|
:t2.0
PRISM TYPE Roof
Schmidt-Pechan
| Roof Abbe – Koenig
HEIGHT
| 5.7′
(144.8mm)
| 7.0′ (177.8mm)| 7.6′
1193.0mm)
| 8 . • ·
(113.4mm)
WIOTH
| 5.1′
(129.5mm)
| 5.7′
(144.8mm)
| 5.9′
(149.9mm)
| 6.2′
1157.5mm)
WEIGHT
| 21.9 oz
(0.61k!I
| 32.4oz
(0.92k!l
| 36.5oz
(!.03k!l
| 42.0oz
(l.19k!l
PRODUCT OVERVIEW
When it comes to serious glassing, the details are what matters most, and with the Razo UHD, you won’t miss a thing. Built lens-to-lens for those who demand the best in each component, the RazOf* UHD provides exceptional optical quality and color fidelity. An optical system built around better light transmission, while advanced lens coatings conquer low-light situations. The larger prism provides better image resolution whether looking near Of far. See more with the Razors UHD.
BASIC OPERATION
Adjust the Eyecups
The Eyecups on RazorC UHD twist up and down allowing anyone to obtain a full field of view and comfortable viewing despite differences in facial structure and for use with or without glasses. When not using glasses, generally the Eyecups will be fully extended. When using glasses, generally the Eyecups will be fully collapsed
Adjust the interpupillary Distance
The interpupillary distance (IPD) is the distance between the centers of the left and the right eye pupils. Match the IPD of your eyes to the binoculars so that you see a single image free of edge distortion.
Focus the Binocular
For the best results, follow this two-step process to properly adjust the Center Focus and Diopter. Choose an object about 20 yards away from you and stay in the same spot until you have adjusted the binoculars for your eyes.
- Adjust the Center Focus -Start by closing your right eye or covering the right objective lens with your hand. Look through the left barrel and adjust the Center Focus wheel until the image is in focus. Leave the Center Focus in position as you adjust the diopter.
- Adjust the Diopter -Start by closing your left eye or covering the left objective lens with your hand. Look through the right barrel and adjust the Diopter until the image is in focus. Make note of the position of the Diopter setting in case you need to set it again. From this point on, you will only need to use the Center Focus wheel.
ACCESSORIES
GlassPak’s” Pro Binocular Harness
Smartly designed for multi-day hunts, the GlassPak”‘ Pro modular chest-harness system is designed for comfort, durability, and lightning-fast access to critical gear.
Follow these steps to adjust the fit of your harness.
- Position the harness with the stitched logo facing outward with the G-hooks at the top and the side-release buckles at the bottom.
- Clip the G-hooks into the loops at the top of the backside of the case.
- Slip the harness to your head so that the harness is on your back and the case is on your chest.
- Snap the side-release buckles to the buckles at the bottom of the backside of the case. Adjust the straps to fit your body snugly so the harness is positioned high and tight on your chest.
- Roll up and secure any loose straps at the top of the harness.
- Thread the binocular tether straps through the strap attachments on the binoculars. Thread the binocular tether straps back through the tether strap buckles to secure.
Lens Covers
The Razo UHD comes with Tethered Objective Lens Covers and a Rai guard for the Ocular Lenses. Use these covers to protect the lenses whenever you are not using your binoculars.
Neck Strap
Attach the padded Neck Strap in these three simple steps:
- Push a few inches of the strap through the Strap Attachment to the binocular.
- Hold the buckle and thread the end of the strap through the buckle.
- Adjust the Opera II length, then pull tight until the strap is secured within the buckle.
Note : If using another type of strap, never attach metal O-rings directly onto the Strap Attachment.
MAINTENANCE
Cleaning
Your binocular requires very little routine maintenance other than periodically cleaning the exterior lenses. The binocular exterior may be cleaned by wiping it with a soft cloth. When cleaning the lenses, be sure to use products that are specifically designed for use on coated optical lenses.
- Be sure to blow away any dust or grit on the lenses prior to wiping the surfaces.
- Using your breath, or a very small amount of water or pure alcohol, can help remove stubborn dried water spots.
Lubrication
All binocular components are permanently lubricated, so no additional
lubricant should be applied.
Note: Other than to remove the Rainguards, Ob1ective Lens Covers, and
Tripod Adapter Socket Cap. do not attempt to disassemble any binocular
components. Disassembling binoculars may void the warranty.
Storage
If possible, avoid storing your binoculars in direct sunlight or any very hot
location for long periods of time.
Caution: Binoculars are not intended for looking at the sun, or any other
intense light source. Such viewing could damage the retina and cornea of your
eyes – even to the point of causing blindness.
Virtual Patent Marking Notice By Vortex Optics
This product may be protected by patents in the U.S. and elsewhere for Vortex Optics. http:/Mx.legal website is provided to satisfy the virtual patent marking provisions of various jurisdictions including the virtual patent marking provisions of the America Invents Act and provide notice under 35 U.S.C. §2871a). Please visit httpJ/vtx.legal to view a list of products that may be covered by one or more U.S./ Foreign patents or published patent applications.
WARRANTY
VIP WARRANTY'” OUR UNCONDITIONAL PROMISE TO YOU.
- We promise to repair or replace the product. Absolutely free.
- Unlimited.
- Unconditional.
- Lifetime Warranty.
- You do not have to register, save the box, or a receipt for the Warranty to be honored.
- Learn more at VortexOptics.com
- service@VortexOptics.com
- 1-800-4VORTEX
- Note: The VIP Warranty”‘ does not cover loss or theft. deliberate damage, or cosmetic damage not affecting product performance.
- For the most up-to-date manual visit VortexOptics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>