Vortex TAB10 Tablet User Manual
- June 1, 2024
- VORTEX
Table of Contents
****
Vortex TAB10 Tablet User Manual
Attention
This handbook contains important security measures and the correct use of the
product information, to avoid accidents. Plus, make sure to read the manual
carefully before using the device.
- Please don’t be in high temperature, moisture or very dusty place
- Please don’t be in high temperatures, Especially in summer don’t put the device in the car when Windows closes.
- Avoid falls or Violent collisions with the device, don’t make the TFT display the screen was a violent tremor, This could cause the TFT display screen abnormal or damaged.
- Please choose the appropriate volume, Using headphones should not be too big volume, If feel tinnitus, Lower the volume or stop using it
- please charge In the following conditions
- The battery power ICONS shows has no power
- The system automatically shuts off, startup after power off soon
- Operation buttons no response
- The machine that the top right corner shows red icons
- When the device is in the format or ongoing upload and download file, please don’t suddenly disconnect, This could cause an application error.
- For those who because of damage to the product, repair, or other causes of erased memory, The Company shall not be liable for any responsibility, please follow the user manual for the standardized operation to use the device.
- Don’t disassemble the product, don’t use alcohol. Thinner or benzene to scrubbing products.
- Don’t use the device in one of the places prohibited use of electronic equipment in the region (such as the plane)
- Please don’t use the Tablet PC when you in driving or walking down the street,
- USB just only be used for data transmission The company reserves the right to improve product, product specifications and design have any change, The information is subject to changes without prior notice.
- (This tablet has no waterproof function)
[Remark J All pictures in this manual are just for your reference. products specification and design have any change, The information is subject to changes without prior notice.
Desk
Touch panel
Capacitive touch panel: In The Operation, click, and drag on the touch panel
POWER
startup: Long Press and hold the power button, and the system will enter
the main interface
shutdown: In the main menu interface, Press the power button for about 5
seconds to shutdown, The system can hint “power off” option, and click “ok”.
you can safely shut down.
Lock screen: Short press the Power button to lock the screen or unlock
the screen.
Remark When power is empty, the system will shut down automatically. Illegal turn off the device, restart will scan and restore the disk, it may take longer time to enter into the system
BACK
A short Press BACK button will return the last interface,
MIC
Recording
Volume +, Volume-
the buttons on top Volume +, Volume-achieve changes in the volume.
earphone jack
3.5 mm standard earphone jack
TF card
TF-CARD solt: external T-FLASH card
Mini USB
MiniUSB jack: you can use it to connect the computer to data transmission,
charging and external connection USB flash drive
DC Adapter
For charging. your tablet battery
Recovery
When the Tablet is under the condition of a crash, upgrade firmware.
First use
Battery management and charge
Before first use, please set the device’s battery to be fully charged Just
need to connect the adaptor or USB interface, and then you can charge The
first two times please keep about 6 hours, after that, you just need 4 hours
to charge.
[Remark]: This tablet uses a Built-in type polymer battery, Charge must be to
choose a standard adaptor (Input: AC110~240V 50/60Hz Max: 180MA.. Output:
DC5.0-5.5V/1.5A), this device without supply DC charging, USB interface can
charge, Choose USB interface to charger During the charging, the battery icon
will scroll When finished charging, battery icon will become green and stop
rolling To prolong the service life of the machine, suggest use out battery
power before charge it
[Remark]
- If you long time don’t use this Tablet, to avoid power consumption damage, pls charge/play the battery once a month.
- After the low battery shuts down, connect the DC adaptor, and the device will remember low battery, charging, and need to wait some time until the battery has enough power to enter the main menu.
- Device charging should be in standby status to reach normal charging time.
- Because device and screen consumption may cause longer charging time.
Connection with PC
Use a USB cable to connect the device to the PC, the device will pop up the
USB connection window, click Turn on USB storage to connect to the PC.
USB connected
Into the load mode, you can copy, or delete the file on the device and the
file on the memory card.
Equipment operation interface
The main interface is described. After startup will enter the main interface.
In the main interface, you can
Management main interface software ICONS: Long press the icons for 3 seconds,
after the icons are bigger, then you can drag them anywhere in the interface.
Delete icons: Long press the icons for 3 seconds, and drag the icons to the
Recycle Bin icon, once it becomes red, Loosen your hand, and after that, you
can delete the icon You touch the screen keep time, appears the dialogue box”
Add to Home screen” as shown below:
status bar describe
The status bar above
the screen’s Top left displays the main interface software, T-Flash card, USB
connection status and so on Top right displays the battery, battery charge
icons, current time, set time, Settings Menu, and ESC button.
Use the touch panel
The device is equipped with a touch. The main touch screen area is described,
and some of the tips for how to use the touch screen. No matter which
interface you are on the screen, can go back to the main screen by pressing
the soft key on the bottom right corner of the main screen.
[ Attention] The main screen soft key [functions as the machine back
keytar In different applications, by tapping the back soft key on the bottom
right corner of the touch screen, you can return to its interface on the
floor. In different applications, by tapping the menu key on the upper right
corner of the touch screen, the screen will appear operation setting interface
as follows,
[Remark]: The main screen soft key functions as the machine manue.
In the main interface, you can touch the icon to open the APPs In different browsers (files, music, video, pictures), You shift and drag the scroll bar so that the file list can up or down to roll.
Equipment basic set
Setting: Click the setting icons and enter the settings interface.
Silent
selection, Screen lock sounds mode, Volume, Notification ringtone, Audible as
Anel W-FI.
Application
- Manage Applications Unknown sources: Click “Unknown Sources”, then click “OK”
- Manage application: Manager and uninstall the Application
- (Remark) : when you Firmware Upgrade, pls close the USB connect
How to uninstall?
- enter “setting”>”Application” >”Manage application” then there will be installed the program list
- Click you want to uninstall icons, will enter the following interface
- Click Uninstall, and then you can complete the application
Privacy
Factory data reset
Storage
Remove TF card, view of the available storage space
[Remark]: pls touch the option”delete SD card”, so that can safely remove the
SD card
Language & keyboard
Setting: (Language), text input and automatic error correction options
Accounts & syne
- Location services language & circuit
- Backup & reset
SYSTEM
- Date & time
- Accessibility
- Developer options
About tablet
Select Language: 54 kinds of national languages are available
Remark: The Android system can support 54 kinds of language, but now the Manu
interface only supports 14 languages, Android keyboard: Android keyboard
setting Sound on Key-press
Auto-capitalisation
Show suggestions: Display suggested words while typing
Auto-complete: Specebar and punctuation automatically insert the highlighted
word
Date & time setting
Set date, set time, Select time zone and select date format
Developer options
Choose Usb work palm. OTG/HOST/SLAVE…….
About tablet
Apps Install and manage
This Tablet can support Android apps in the market by third parties, most Apps
can be installed in the network and can be copied to NAND FLASH or SD card.
Click the Appinstaller icon, will appear Install, manage, and Exit options.
Install: Click install, and enter the APK install interface Separately for the
Internal Memory disk and SD Card disk. Select the APK you would like to
install, click it to install, and go back to the main menu, will display the
installed app you just selected.
Remark: some 3″ APP must be installed properly by a memory card, downloaded
3″ party apps may not install properly on the device.
Manage: click manage, enter third party interface Click the install icon, and
enter the Action interface
Problem solution
The device can’t open
- Check the battery power
- Connect the adaptor first, then check again
- After charging then can’t open, pis contact with the supplier
- After the startup of the screen or the opening picture has appeared, then the device appears shut
- Power is not enough, please charge
Headset can’t hear the voice
- Pls check whether the volume whether set to
- Check the music file where damaged. Try playing other music, if the file is damaged may lead to serious noise or hop sounds.
Can copy files or play music and so on
- Pis check between the computer and device is the correct connection
- check the memory storage space is already full
- check whether the USB cable is good or not
- The USB connection is disconnected
Basic function
Download PDF:Vortex TAB10 Tablet User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>