Vortex VOLT 8 Mobile Phone User Manual
- June 1, 2024
- VORTEX
Table of Contents
Vortex VOLT 8 Mobile Phone User Manual
PRECAUTIONS
On the Road
Using a device while driving is illegal in many countries. Please refrain from
using you’re mobile while driving.
Near Sensitive Electronics or Medical Equipment
Don’t use your device near sensitive electronic equipment – particularly
medical devices such as pacemakers – as it could cause them to malfunction. It
can also interfere with the operation of fire detectors and other automatic
control equipment.
While Flying
Your device can cause interference with aircraft equipment. So you must follow
airline regulations. And if airline personnel ask you to switch off your
device, or disable its wireless functions, please do as they say.
At a Petrol Station
Don’t use your device at petrol stations. It’s always best to switch off
whenever you’re near fuels, chemicals or explosives.
Making Repairs
Never take your device apart. Please leave that to the professionals.
Unauthorized repairs could break the terms of your warranty. Don’t use your
device if the antenna is damaged, as it could cause injury.
Around Children
Keep your mobile out of children’s reach. It should never be used as a toy as
this is hazardous.
Near Explosives
Turn off your device in or near areas where explosive materials are used.
Always obey local laws and turn off your device when requested.
Emergency Calls
To make an emergency call your device must be turned on and in an area where
there’s network coverage. Dial the national emergency number and press “Send”.
Explain exactly where you are and don’t hang up until help has arrived.
Working Temperature
The working temperature for the device is between 0 and 40 degrees Celsius.
Please don’t use the device outside the range. Using the device under too high
or too low a temperature might cause problems. At very high volumes, prolonged
listening to a mobile device can damage your hearing.
PARTS AND BUTTONS OF THE DEVICE
- Front Camera
- Receiver
- light distance sensor
- Touchscreen
- Volume button
- Power button
- Back button
- Home button
- App switch button
- Micro USB and charging port
- Earphone jack
- Rear camera
- Flash
- Speaker
- Microphone
TOUCH BUTTONS
- The button moves back one step to the previous menu/page.
- The button returns immediately to the main screen.
- The button displays a menu of recently opened applications. This interface adds a “CLEAR ALL” button）
- The button will launch the applications and settings menu.
GETTING STARTED
Installing the micro-SIM Card and Battery Switch off your phone before installing or replacing the battery or the micro-SIM card. Insert your fingernail into the slot at the bottom left of the back cover, and slide the fingernail across the bottom of the back cover to lift it off.
WARNING!
To avoid damage to the phone, do not use any other kind of SIM card, or any
non-standard micro-SIM card cut from a SIM card. You can get a standard micro-
SIM card from your service provider. Insert the battery by aligning the metal
contacts on the battery with the metal contacts in the battery compartment.
Gently push down on the battery until it clicks into place. Align the back
cover with the back of the phone and press the cover back into place. Ensure
that all the tabs are secure and there are no gaps around the Cover.
HOME SCREEN
The home screen will look similar to the picture below. To switch between
screens, simply slide your finger left or right across the display. The home
screen contains shortcuts to your most-used applications and widgets. The
status bar displays system information, such as current time, wireless
connectivity and battery charge status.
QUICK NOTIFICATION PANEL
When you receive a notification you can quickly view it by following the below
instructions. Slide your finger from the top of the screen down to the centre
to access the Notification Panel to see your notifications. Drag the
notification menu down to display the second fast-access menu, the menu will
look similar to the below image. Through this menu, it is possible to modify
the functions such as brightness, auto-rotation, Wi-Fi, Bluetooth and more.
SETTINGS MENU
The settings menu allows you to adjust the Tablet cellphone System
Configuration.
To Change Settings
- Touch the “Settings ” menu icon on the Application menu. The settings menu will open.
- Touch a category title to view further options on the right side of the screen.
- Wi-Fi – Connect to/disconnect from wireless networks, view connection status
- Data usage – Enable/disable mobile data, view current usage, set mobile data limit
(note: this function is available only on devices supplied with a 3G card functionality)
- Bluetooth – Connect or disconnect Bluetooth devices
- Display – Adjust display settings
- Notifications – Adjust different notification settings
- Sound – Adjust the different audio settings such as ringtones
- Apps – A list of all apps downloaded and running
- Storage – View your phone’s internal and external storage settings
- Battery – View the status of your battery and make adjustments to power consumption
- User – Switch between Owner and Guest
- Location – Change approximate location detection, improve search results, GPS satellites
- Security – Adjust the phone’s security settings
- Accounts – Add or remove email and Google accounts such as Gmail, Google
- Language and input – add to the dictionary, edit on-screen keyboard settings, vocal search, etc.
- Backup and reset – Backup and restore data, perform factory reset, etc.
- Date & time – Set date, time zone, time, clock format etc.
- Accessibility – Set up large text, auto-rotate screen, speak the password etc.
- About Phone – Displays information about your phone
INSERTING/REMOVING SIM CARDS
- When the phone is powered off insert a SIM card by removing the SIM cover as illustrated above, insert your finger in the indent located near the charging port and unclip the SIM cover, then insert the SIM card. Please take note of the direction of insertion following the diagram on the phone’s SIM port.
- After inserting a SIM card, turn on the phone and wait a few minutes for your phone to display Network information.
Inserting and Removing TF Card
NB: Please ensure when inserting an SD card your phone is powered “OFF”
- Insert the TF card into the TF card slot located under the SIM card cover as explained in the Inserting/Removing SIM card section. Gently push the TF card into the slot until it clicks into place.
- A prompt will be seen on the screen saying “Preparing SD card”.
Removing TF Card
- Close all applications and documents that have been opened from the card.
- Select “Settings” and find “Storage” then click “Ejected SD card”.
- A prompt will be seen on the screen saying “SD card safe to remove”.
- Gently press the TF card to remove and pull out the TF card.
MAKING AND RECEIVING CALLS
Once your SIM cards are installed turn on your phone and wait a few minutes
for your phone to find a network. Then select the Call icon. Here you can dial
a number or select a contact from your stored contacts list to call. You can
also view outgoing and incoming calls that have been made, as well as adding
or removing contacts.
ANSWERING AND REJECTING CALLS
To answer a call – Slide your finger into the green Call Answer key.
To reject a Call – Slide your finger into the Red Call End key.
SEND MESSAGE
Touch the Messaging icon to other mobile phone users to send SMS or MMS, enter
the name or phone number in the “Type name or number” column, or select one
from the contacts. Enter the information content and select send.
SOFTWARE KEYBOARD
The phone has a software keyboard that automatically displays when you tap the
place on the screen where you want text or numbers to be entered, then simply
start typing.
Touchscreen
The touchscreen responds to finger touch.
Note
- Don’t place any object on the touchscreen for it may damage or crush the screen.
- Single Click: Single click one icon to choose the icon or option you want.
- Long Press: Press and hold an icon to delete or move an icon or app.
- Drag: Press the icon and drag it to a different screen.
HOW TO CONNECT TO A COMPUTER
Note:
Turn on your phone before connecting the phone to a PC by USB cable.
- Use a USB cable to connect the phone to a computer. The phone will automatically detect a USB connection.
- A notification will pop up on the screen displaying the USB connected, select the desired USB operation.
- The USB connection has been successful.
CONNECTION TO INTERNET
Wireless:
- Select “Settings”.
- Select “Wi-Fi” and slide OFF to ON status.
- All detected wireless networks in the area will be listed. Click to select the desired wireless connection.
- Enter the network key if necessary.
- Once connected to a wireless network, settings will be saved.
- The wireless icon will appear on the status bar when connected successfully.
Note:
When the phone detects the same wireless network in the future, the device will connect to the network automatically with the same password record.
MOBILE DATA AND INTERNET
Please Note: Cell Data may be turned “OFF” as a factory setting, to allow data
to flow through your network provider please turn Cell Data “ON” either from
your quick drop-down menu or in > Settings > Cell Data, you will not be able
to access the Internet when Cell Data is “OFF” and not connected to Wi-Fi.
NB: Mobile Data charges apply when this setting is “ON” – Data will be
passed through your network provider. Web Browsing Connect to the Internet and
launch the browser. Type in the desired browsing URL.
BLUETOOTH
Select “Settings”, and select Bluetooth from “OFF” to “ON”. Search for the
device you would like to pair with and select “PAIR”. You will see the message
“Connected Successfully”.
CAMERA
Touch the icon to enter camera mode and the interface is shown as follows:
- Touch the icon to take a photo.
- Touch the icon to start the camera recording.
- Touch the icon on the top right to see the previous picture and to delete, share or set it as a wallpaper.
- Click the return button to exit the camera interface.
- Touch the icon to switch from the front to the back camera.
TROUBLESHOOTING
How to Close Applications
When an application is not responding you can manually shut the app down in
the “Running Services” menu. This will ensure the system responds as desired.
Please shut down all idle applications to release memory and get the system
speed back to normal. To close the application, click the icon on the shortcut
bar to enter the system configuration interface. Select the Application
Running and the interface is Tap the application you want to close. A pop-up
window will be displayed. Tap “Stop” to close that application.
Power “OFF” / Restart / Reset the Phone
- Press and hold the power button for 5 seconds and the device will be powered down.
- Press the reset button located under the power button with a sharp object and the device will be forced to restart.
Restore Default Setting
If you want to reset the phone to factory settings and erase all materials,
please press Settings -Backup & reset- Factory data reset.
WARNING
The Factory Data Reset setting will delete ALL your data and system
configuration as well as any downloaded apps. Please use this function
carefully.
SPECIFICATIONS
Download PDF: Vortex VOLT 8 Mobile Phone User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>