Vortex T10M PRO Tablet User Manual

Vortex T10M PRO Tablet

Product Information

The T10M PRO is a tablet device equipped with a 5MP front camera and an 8MP main camera with LED flash. It has a volume button for adjusting the volume or muting incoming calls, a power button for turning the device on and off, and a 3.5mm audio jack and Type-C USB for audio and charging needs. It also has a SIM/T-flash card slot and a speaker for audio output.

Product Usage Instructions

Power Button:

To turn on the device, long-press the power button. When the device is on, short press the power button to shut down or turn on the screen.

Volume Button:

Short press the volume button to adjust the volume or to mute incoming calls.

Card Insert Manual:

To insert a Micro-SIM card, insert it with the chip facing down, in the direction of cutting a Micro-SIM card into a slot.

Network Connection:

To connect to WIFI, go to Settings > Network & Internet > Wi-Fi. When WIFI is on, a list of available WiFi connections will appear. Click on the one you want to connect to, enter the password if the network is encrypted, then click Connect. When it’s a public network, just click Connect. When the network shows as connected, it is available to use.
To enable Bluetooth function, go to Settings > Connected devices > Bluetooth. Enable the Bluetooth function by clicking the Menu Button then select Refresh, then the tablet will search for available Bluetooth devices for pairing and list on the screen. Click on the one you want to pair with, then click Pair on the dialog pop-up. Documents are available for transmission after Bluetooth pairing.

WIFI Hot-spot Setting:

To turn on the Portable WIFI Hot-spot function, go to Settings > Network & tethering > Wi-Fi hotspot. When setting up WIFI hot-spot, enter your user name in Network Name and password, then click Save. Another device password of the password.

Camera:

To take photos or videos, aim the camera at the shooting object, and the tablet will start focusing automatically. Alternatively, you can click on the screen to choose the object you want to focus on, then click the Capture icon to take photos. You can also choose other modes such as video recording, beautifying, and panorama to take photos/videos.

SIM Card & SD Card Instructions:

The device is equipped with a single SIM card slot and an SD card slot. It is not a device with a Dual SIM card.

Security Information:

Please prevent the device or the battery in extreme cold/hot conditions. Extreme temperatures will lead to the deformation of the tablet and reduce the charging capacity and battery life. Please only use the custom-designed and approved battery and charger by Vortex. An incompatible battery and charger may cause damage to the tablet. Please abide by local regulations when disposing of the used batteries and tablets.

PRODUCT HEX-VISION IMAGE

VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls

POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen

CARD INSERT MANUAL

Insert Micro-SIM Card
Insert a Micro SIM card. Insert the Micro-SIM card with the chip facing down. Note the direction of cutting a Micro-SIM card into a slot.

TF Card installation

Please place the metal sim tray slot on TF card Place, be aware of the direction of the cut edge. Insert the card directly into the device.

Reminder:

• Please turn off the tablet before changing or replacing the TF card.TF card does not come with the tablet please purchase separately.
• Do not insert or remove the SiM card when the tablet is turned on.

SIM MANAGEMENT

Please choose which SIM card slot to be the main one to be for the 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G/2G via Setting > Network & Internet>Mobile network Preferred network type.

NETWORK CONNECTION

• Connecting WIFI
  into the setting of WIFI via Settings > Network & Internet> Wi-Fi When WIFI is on, a list of available WiFi connections will appear.
  Click on the one you want to connect to, enter the password if the network is encrypted, then click Connect. When it’s a public network, just click
  Connect When the network shows “connected”, it is available to use.

• Bluetooth Function
  Into the setting of Bluetooth function via Settings > Connected devices > Bluetooth Enable the Bluetooth function by clicking the Menu Button then select “Refresh”, then the tablet will search for available Bluetooth devices for pairing and list on the screen. Click on the one you want to pair with, then click “Pair “on the dialog pop-up. Documents are available for transmission after Bluetooth pairing.

• Reminder :
  Slide down the status bar to open the shortcut switches for Bluetooth and other functions.

• WIFI Hot-spot Setting
  Click on Settings > Network & tethering > Wi-Fi hotspot to turn on the Portable WIFI Hot-spot function.
  When setting up the WIFI hot-spot, enter your user name in “Network Name” and password, then click Save. Another device password of the password.

• Reminder :
  Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WIFI shot spot depends on the signal strength and devices.

CAMERA

Aim the camera at the shooting object, the tablet will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click the ” Capture” icon to take photos. You can also choose other modes such as video recording, beautifying, and panorama to take photos/videos.

INSTRUCTIONS FOR SIM-CARD &SD Card

The Device is equipped with a Single Sim card slot and SD card slot . It’s not a device with Dual SIM card

SECURITY INFORMATION

• Security information (including BS, ES, and battery security information)of third-party software installation and function may vary in different regions or by different hardware specifications. Vortex holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing,OS software modification. Customizing the OS may cause the device or some applications to fail to work properly.
• Please prevent the device or the battery in extreme cold/hot conditions. The extreme temperature will lead to the deformation of the tablet and reduce the charging capacity and battery life.
• Please only use the custom-designed and approved battery and charger by Vortex. incompatible battery and charger may cause damage to the tablet. Please abide by local regulations when disposing of the used batteries and tablets.
• Please do not place the battery or the tablet onto or inside heating devices such as microwaves, ovens or radiators. The battery may explode if it gets too hot.
• Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheating .

SPECIFICATIONS

BASIC INFORMATION

• Model  T10M PRO
• Operating System Android™ 13
• CPU Arm-Cortex A53 MPCoreTM /2.0Ghz GPU IMG PowerVR
• GE8300
• RAM 4GB
• ROM 64GB
• Battery 5000mAh

Display

• Screen Size 10.1 inch
• Resolution 1280*800 Pixeis
• Touch Capacitive multi-touch

Cameras

• Front Camera
• Rear Camera
• 5MP Camera
• 8MP Camera

Connection

• Band GSM:B2/3/5/8
• WCDMA :B2/5
• FDD:B2/3/4/5/7/12/13/17/25/26/66/71
• TDD:B41HPUE
• SIM/TF card 1 Micro SIM Card and 1 TF Card
• WiFi IEEE802.11 a/b/g/n/ac
• Bluetooth Bluetooth 5.0
• GNSS GPS
• FM YES
• Earphone Port 3.5mm
• USB Port Type-C USB

Other Features

• Video File Format 3GP/MPEG4,etc
• Audio File Format WAV/MP3/AAC/AMR/MIDI/APE/WMA,etc Card
• Extend Support TF card up to 256 GB
• Language Support Multi-language
• Sensor G-Sensor,Gravity sensor,Compass

In the box

• 1*tablet
• 1*Type-c Cable
• 1* Power Adapter
• 1*Quick Start Guide
• 1* Protective Case

FCC

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur In a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISEDC Warning

Operation of 5150-5250 MHz is restricted to indoor use only. This device complies with Innovation, Science, and Economic Development Canada licence- exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is a available for sale to the public, it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, tests for each phone are performed in positions and locations as required by the FCC/ISEDC. For body worn operation, this model phone has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 0mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines. For body-worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with a leather case. The users must use this leather case. Use of other leather case may not ensure compliance with FCC/ISEDC RF exposure guidelines.
In all EU member states. operation of 5150-5250 MHz is restricted to indoor use only.
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>