StarTech B4HEVX2CMOD Base Station Conference Module User Manual
- September 5, 2024
- StarTech
Table of Contents
StarTech B4HEVX2CMOD Base Station Conference Module User Manual
Power ON/OFF
Power ON : Turn the volume knob clockwise to turn power ON.
Power OFF : Turn the volume knob anticlockwise to tun power OFF.
Pairing(Register mode)
a). Enter the pairing mode: Press the button #1 or #2 under the belt clip
and hold 3 seconds, till to the LED blinking.
b). Main headset enter the pairing mode first then also the module to
pairing mode.
c). The LED of module will several blink polythene turn off after paired,
turn the power OFF to quit the pairing mode.
d). Press the power button to OFF Main headset to finish the
pairing(register).
Talking and listening
a). The main headset and module will start to search each other after
power ON, the headset will be link together automatically.
b). Press the volume knob to adjust wired headset speaker sound volume.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISEDC Caution:
This device complies with Innovation, Science, and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
The device has been tested and comply with FCC/ISED SAR limits.
To prevent possible hearing damage, do not listen at high volume levels for
long periods
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>