VEVOR S20A Binding Machine Instruction Manual
- September 5, 2024
- VEVOR
Table of Contents
VEVOR S20A Binding Machine
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Warning -To reduce the risk of injury, user must read instructions manual carefully.
WARMING & ATTENTIONS
- Read this operation manual carefully before using.
- Keep the machine separately from children.
- Keep the machine away from fire and liquid.
- Put the machine on a stable and safe place in order to prevent if from falling or causing any injury to people or the machine itself.
- Test the machine with some scrap paper before formally punching and binding, to make sure whether the position is correct to punch. Please do not let the child operate separately.
- Take out the surplus parts from the packing box. Put the machine on balanced and safe place to avoid falling off or causing any injury to people or the machine.
- Operate the machine strictly as per the manuals especially pay attention to the max Punching and binding capacity.
- Please test the machine before you punch the official documents. When punching the plastic covers, we suggest that the cover should be clipped between two pieces of paper.
- Please don’t use the machine to punch hard materials such as metals to avoid damage to the machine.
- When clamping the plastic ring, pls don’t put your fingers inside this area, otherwise, you will get hurt.
- The machine is only dedicated to using plastic ring.
- Please don’t put the machine in wet places to avoid any liquid dropping inside.
- For the first use, make a punch with blotting paper to suck up excess lube from the blade.
STRUCTURAL REPRESENTATION
TECHNICAL SPECIFICATIONS
Rating(s):| 110V~120VAC 60Hz 6.75±10%W
220V~240VAC 50Hz 6.75±10%W
---|---
Punching Capacity:| 20 Sheets (A4 80g)
Binding Capacity:| 500 Sheets (A4)
Adjustable Margin:| 3/5/7 mm
Number of Holes:| 46 holes
Square Hole Distance:| 6.35mm
Round Holes Size:| 4mm
Quantity of Movable Cutter:| all
Paper Format:| A4 paper or smaller sizes
Machine Dimension:| 416299300mm
N.W.:| 7.5kg
Packing Dimension:| 480225360mm
G.W.:| 8.4kg
PARTS LIST
| Parts Name | Quantity |
|---|---|
| PVC spiral coil | 100 pcs |
| Wire cutters | 1 pc |
| Blotting paper | 1 pc |
| Instructions | 1 pc |
OPERATING GUIDE
NOTE Place the machine on a steady and even place before using!
For the first use, make a punch with blotting paper to suck up excess lube
from the blade.
Punching Operation
Binding Operation
Choose the spiral coil according to the thickness of the document. The following form is for your reference to choose the proper spiral coil.
Spiral size
(mm)
| Spiral size
(inch)
| Max.Binding
sheets
| Spiral size
(mm)
| Spiral size
(inch)
| Max.Binding sheets
---|---|---|---|---|---
6| 1/4| 30| 22| 7/8| 190
8| 5/16| 50| 25| 1| 220
10| 3/8| 70| 28| 1-1/8| 250
12| 1/2| 95| 32| 1-1/4| 280
14| 9/16| 120| 38| 1-1/2| 325
16| 5/8| 145| 44| 1-3/4| 410
19| 3/4| 165| 51| 2| 500
MAINTENANCE
Clean up the waste bin
The waste bin, which is located at the back of the machine, is dedicated for
the waste of punching. The frequency of cleaning up the waste bin depends on
the frequency you use the machine.
- Pull out the waste bin from the back of the machine
- Pour the waste into the rubbish bin.
- And insert the waste bin again.
Please clean up the waste bin frequently!
PROBLEMS & SOLUTIONS
| Problems | Reasons | Solutions |
|---|---|---|
| 1. The lever couldn’t be pressed down when punching | Paper scraps or other | |
| hard materials stay inside the paper cutter | Clean up the rubbish with |
hardboard
Exceeding
capacity
| the| punching| Operate according to the manual
2. Slanting margin
| paper| The paper is lopsided when inserting| Take out the paper and put in
again
Paper scraps or other hard materials stay inside the paper cutter| Clean up
the rubbish with hardboard
3. Slanting comb open
|
plastic
| The binding mechanism is
distorted
| Just the binding teeth on the rack
The comb opening hook is distorted| Press opens the comb opening mechanism and
just the hook
4. Paper punching is not complete and it’s hard to pull out the paper|
Exceeding the max. Punching capacity| Lessen the punching thickness
(follow the manual)
5. Paper couldn’t touch the rack when inserting| The paper is old with the side rolling up| Smooth the insert again|
paper
|
and
Manufacturer : Shanghaimuxinmuyeyouxiangongsi
Address : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany
euvertreter@gmail.com
+49 1727041930
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
pooledas123@gmail.com
Tel: 01772418127
Technical Support and E-Warranty Certificate www.vevor.com/support