Windham Tall Cabinet Instructions

**windham**
tall cabinet

style # WNTLCBDWWH (shell)
dpci # 249-16-1287
tcin # 16508090

style # WNTLCBDWBL (teal)
dpci # 249-16-1286
tcin # 16508091

style # WNTLCBDWGY (gray)
dpci # 249-16-1285
tcin # 16508092

style # WNTLCBDWBK (black)
dpci # 249-16-1283
tcin # 16508094

style # WNTLCBDWRD (red)
dpci # 249-16-0957
tcin # 16508095

assembly instructions

Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck–though we’re confident you won’t need it.

before you begin

1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.

tools needed

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

hardware

exploded diagram

ITEM

| DESCRIPTION|

QUANTITY

---|---|---
A| top panel| 1
B| left side rail| 1
C| right side rail| 1
D| bottom panel| 1
E| lower panel| 1
F| back panel| 1
G| adjustable shelf| 2
H| door| 2
I| drawer face| 1
J| left drawer side| 1
K| right drawer side| 1
L| drawer back| 1
M| drawer bottom| 1
N| support rail| 1

how to use the cam lock system

1. Screw cam bolt into panel

2. Align cam bolt(s) with cam(s) and insert all the way into cross-bored hole(s)
3. Push cam into panel – arrow feature on cam top points to panel edge
4. Rotate cam(s) clockwise 180° to lock panels together

5. Panels should be tight against each other and connection should be rigid

step 1: prepare lower panel then attach lower/bottom panels to right side rail

1. Carefully tap small wooden dowels into place. Leave 1/2″ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush.
3. Refer to page 6 for instructions on how to use the cam lock system.
4. Do not over tighten screws or bolts.

step 2: attach left side rail

1. Carefully tap small wooden dowels into place. Leave 1/2″ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush.
3. Refer to page 6 for instructions on how to use the cam lock system.
4. Do not over tighten bolts.

step 3: prepare top panel then attach

1. Carefully tap small wooden dowels into place. Leave 1/2″ of the dowels sticking out.
2. Align screws with pre-drilled holes.
3. Align bolts with pre-drilled holes.
4. Do not over tighten screws or bolts.

step 4: attach back panel

FAILURE TO FOLLOW ALL DIRECTIONS ON THIS PAGE MAY RESULT IN UNEVEN DOOR ALIGNMENT

Begin by installing all of the screws along one edge of the back panel. Next, using a square or tape measure, make sure that the cabinet is square. (If using a tape measure, the distance from one corner, diagonally to the other corner should be the same in both directions.) If not, apply gentle pressure to the diagonally opposite corners to shift case into alignment. Re-measure to ensure equal distances. Install the remaining screws, starting with the corners.

(H4) x 35
pan head screw

1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten screws.

**step 5: attach knobs to doors

**

1. Align bolts with pre-drilled holes.
2. Do not over tighten bolts.

step 6: attach doors

(H5) x 12
flat head screw

1. Align screws with pre-drilled holes.
2. Do not over tighten screws.

step 7: install adjustable shelves
(H6) x 8
shelf support

1. Insert shelf supports into desired hole. Different holes accommodate different shelf heights.
2. Angle shelf to fit between the rails and set on top of shelf supports.

step 8: assemble drawer starting with drawer sides / finish assembly with back panel

1. Carefully tap small wooden dowels into place. Leave 1/2″ of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush.
3. Refer to page 6 for instructions on how to use the cam lock system.
4. Do not over tighten bolts.
5. Do not over tighten screws.

step 9: install drawer

1. Align bolts with pre-drilled holes.
2. Do not over tighten bolts.
3. Readjust leg levelers as needed.

step 10: install anti-tip kit

how to adjust door alignment

Tips for proper door alignment:

• Adjustable levelers will reduce minor door mis-alignments caused by an uneven floor.
• Use a level to determine if the cabinet top is level. If not, start with the levelers retracted and adjust them as needed. To retract the levelers turn them counterclockwise. To extend the levelers turn them clockwise.
• If door mis-alignment persists, refer back to page 10 for additional information. If the cabinet is not square you will need to repeat this step.

WARNING

Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:

• Install tip-over restraint provided.
• Place heaviest items in the lowest drawers.
• Do not set TV’s or other heavy objects on top of this product, unless the product is specifically designed to accommodate them.
• Never allow children to climb or hang on drawers, doors, or shelves.
• Never open more than one drawer at a time. (OR)
• Do not defeat or remove the drawer interlock system .
  Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
  This is a permanent label.

1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>