WAGAN 8567 In and Out Detachable Solar Wall Light User Manual

October 30, 2023
WAGAN

WAGAN 8567 In and Out Detachable Solar Wall Light

Product Information

The In & Out Detachable Solar Wall LightTM is a solar-powered wall light designed for outdoor and indoor use. It has a detachable light head, a swivel mount, a PIR sensor, and a connection cable. The light head has an LED count of 1000 lumens and can be rotated to reveal the power button for mode selection. The light has two modes: Mode A (Outdoor Light Mode) and Mode B (Indoor Light Mode). The light is RoHS compliant and subject to change without notice.

Specifications

  • Solar panel
  • Battery
  • LED count
  • Brightness (Lumens)
  • Recharge time
  • Lighting time
  • Waterproof
  • Install height
  • PIR Detection Angle/Distance
  • Housing Materials
  • Connection cable length
  • Size
  • Working temperature
  • Warranty

Features

The In & Out Detachable Solar Wall LightTM has the following features:

  • Detachable light head
  • Swivel mount
  • PIR sensor
  • Connection cable
  • Two modes: Mode A (Outdoor Light Mode) and Mode B (Indoor Light Mode)
  • 1000 lumens LED count
  • Waterproof
  • Replaceable battery pack

Mode Selection

To select a mode:

  1. Rotate the light head to reveal the power button.
  2. Press the button 1 time for Mode A (Outdoor Light Mode).
  3. Press the button a 2nd time for Mode B (Indoor Light Mode).
  4. Press the button a 3rd time to turn off the light.

Mode A (Outdoor Light Mode)

In Mode A, the light comes on automatically at night. When battery power is more than 30%, the light has a brightness of 1000 lumens when motion is detected and dims to 50 lumens 20 seconds after no motion. When battery power is less than 30%, the light has a brightness of 1000 lumens when motion is detected and turns off 20 seconds after no motion.

Mode B (Indoor Light Mode)

In Mode B, the light has a brightness of 1000 lumens when motion
is detected and turns off 20 seconds after no motion. The daylight
sensor is deactivated, and the light will come on day or night.

Device Installation
The In & Out Detachable Solar Wall LightTM can be installed in two ways: Integrated Wall Mount and Split Wall Mount.

Installation A

Integrated Wall Mount

  1. Choose a location that receives direct sunlight.
  2. Mark the location for the mounting slot and cable storage hole
  3. Insert the expansion plugs in the holes and thread the screws into the expansion plugs.
  4. Hang the light on the screws using the mounting slot.
  5. Connect the solar panel to the light using the connection cable.
  6. Store any excess cable in the cable storage.

Installation B

Split Wall Mount

  1. Choose a location that receives direct sunlight.
  2. Mark the location for the mounting slot and cable storage hole.
  3. Install the solar panel using screws or adhesive tape.
  4. Install the light head using screws or adhesive tape.
  5. Connect the light head to the solar panel using the connection cable.
  6. Store any excess cable in the cable storage.

Applications

The In & Out Detachable Solar Wall LightTM can be used in the following applications:

  • Integrated wall mount for garden, entrance, garage, courtyard, fence, etc.
  • Split wall mount for roof, corner, pathway, shed, workshop, out building, attic, pavilion, etc.
  • Portable as flashlight, camping light, emergency use, etc.

Special Note

The internal battery pack of the In & Out Detachable Solar Wall LightTM is replaceable. Please contact Wagan Customer Service for part # AA5911. The light may interfere with pacemakers and other implanted medical devices when placed within a close proximity. Keep this product at least 6 inches from your chest if you have a pacemaker.

TECHNICAL DATA


MODEL

| ****

SKU

| ****

SHAPE

| ****

WATTS

| ****

LUMENS

| ****

CRI

| ****

BEAM ANGLE

| ****

IP RATING

| ****

BODY TYPE

| ****

TOTAL CURRENT

| ****

INPUT POWER

| ****

LIFE SPAN

| ****

ON/OFF CYCLE

| ****

DIMENSION (LxWxH)

---|---|---|---|---|---|---|---|---|---|---|---|---|---
VT-60012| 7873,7874

7875,97173

| ROUND| 12W| 1200LM| ****

80

| 120°| ****

IP20

| ****

PLASTIC

| ****

71mA

| AC:220-240 50/60Hz| 20000H| >15000| φ167.4×30.7mm
97178| SQUARE
VT-60018| 7876,7877

7878,97174,97175

| ROUND| 18W| 1800LM| ****

80

| 120°| IP20| ****

PLASTIC

| ****

103mA

| AC:220-240 50/60Hz| 20000H| >15000| φ215.6×30.8mm
97179,97180| SQUARE| 214x214x31mm
VT-60024| 7879,7880

7881

97176,97177

| ROUND| ****

24W

| ****

2400LM

| ****

80

| ****

120°

| ****

IP20

| ****

PLASTIC

| ****

160mA

| AC:220-240 50/60Hz| ****

20000H

| ****

15000

| φ288.6×31.2mm
97181,97182| SQUARE| 287x287x30.7mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instruc-tions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING

  • Please make sure to turn off the power before starting the installation.
  • Installation must be performed by a certified person.
  • The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
  • For Indoor use only
  • If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
  • Method of attachment of the cable or cord such that any replacement can only be made by the manufactur-er, his service agent or similar qualifed person.

SURFACE PANEL INSTALLATION DIAGRAM

This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected]

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WAGAN User Manuals

Related Manuals