OLIGHT I3T 2 EOS Pocket EDC Flashlight User Manual

OLIGHT I3T 2 EOS Pocket EDC Flashlight

Product Information

Specifications

• COOL WHITE CCT : 5700~6700K
• CRI : 70
• HIGH 200 lumens
• LOW 5 lumens
• Runtime
  • HIGH : 7 minutes at 100%, 28 minutes at 50%
  • LOW : 21 hours at 100%
• Beam Distance : 62 meters (63cd)
• Waterproof Rating : IPX8 (submersible up to 1.5 meters)
• Dimensions : (L)89(D)15mm / (L)3.5(D)0.59in
• Battery : 1*1.5V AAA Alkaline battery (included)
• Weight : 41.8g/1.47oz (Including Batteries)

Product Usage Instructions

1. Remove the Insulating Film
   Before using the flashlight, remove the insulating film as shown in Figure

3. Turn On/Off the Flashlight
   To turn on the flashlight, press the tail switch firmly until you hear a click (Figure 2). To turn it off, press the tail switch again.

4. Momentary On
   You can activate momentary on mode by lightly pressing the tail switch. Release the switch to turn off the light (Figure 3).

5. Change Brightness Level (Method 1)
   While the light is turned on, press the tail switch firmly twice in a row to change the brightness level between high and low (Figure 4-1).

6. Change Brightness Level (Method 2)
   While the light is turned off, press the tail switch slightly once and then press it firmly once to change the brightness level between high and low (Figure 4-2).

Set Initial Brightness Level (Method 1)
To set the initial brightness level, follow these steps

1. Ensure the light is turned off.
2. Press the tail switch slightly five times in a row with intervals no longer than 1 second.
3. On the fifth press, hold down the tail switch. The current brightness will turn on for 1 second and then change to the desired brightness level (Figure 5-1).
4. This indicates that the initial brightness has been set successfully.

7. Set Initial Brightness Level (Method 2)
To set the initial brightness level using method 2, follow these steps

1. Ensure the light is turned off.
2. Press the tail switch firmly nine times in a row.
3. After the ninth press, the current brightness level will turn on for 1 second and then change to the desired brightness level (Figure 5-2).
4. This indicates that the initial brightness has been set successfully.

8. Battery Installation
To install the battery, unscrew the tail cap. Insert a 1.5V AAA Alkaline battery, ensuring that the positive end of the new battery faces the flashlight head. Screw the tail cap back on (Figure 6).

FAQ

• Q: What is the waterproof rating of the i3T 2 EOS flashlight?
  A: The flashlight has an IPX8 waterproof rating, which means it is submersible up to 1.5 meters.

• Q: How long does the flashlight’s battery last on the low brightness level?
  A: The flashlight can run for approximately 21 hours at 100% brightness on the low level.

• Q: Can I set a specific initial brightness level?
  A: Yes, you can set the initial brightness level using either Method 1 or Method 2 described in the user manual.

¡3T 2 EOS
Slim Tail Switch Flashlight.

IN THE BOX

 Specification

Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.

AVAILABLE BATTERIES

• 1 x 1.5V AAA alkaline battery (included)
• 1 x 10440 lithium battery
• 1 x AAA NiMH battery

Product specification, see Table
Operating instructions as below

Remove the insulating film, see Figure 1.

Turn on/off, see Figure 2
Press the tail switch firmly (you will hear a click).

Momentary on, see Figure 3.
Press it slightly to turn it on momentarily, and release it to turn it off.

Change brightness level(1), see Figure 4-1.
While the light is turned on, press the tail switch firmly twice in a row.

Change brightness level(2), see Figure 4-2.
While the light is turned off, press the tail switch slightly once and then press it firmly once.

Set initial brightness level (1), see Figure 5-1.
Press slightly : While the light is turned off, press the tail switch slightly five times in a row with intervals no longer than 1 second, and hold it down on the fifth press. The current brightness will turn on for 1 second, and then change to the desired brightness level. This indicates that the initial brightness has been set successfully.

2.7 Set initial brightness level (2), see Figure 5-2.
Press firmly: While the light is turned off, press the tail switch firmly nine times. After the ninth press, the current brightness level will turn on for 1 second and then change to the desired brightness level. This indicates that the initial brightness has been set successfully.

2.8 Battery Installation, see Figure 6.

Unscrew the tail cap to insert the battery, ensuring that the positive end of the new battery faces the flashlight head, and then screw the tail cap back on.

WARNING

• Do not look directly at the light source or shine on the eyes, it may cause temporary blindness or permanent damage to the eyes.
• Don’t leave the battery near the fire or a heated source, or throw the battery into the fire. • Do not give the product to children to play with, in order lo avoid accidental swallowing.
• Don’t store, charge or use this light in a car where inside of temperature may be over 60°C, or similar places.

NOTICE

• Do not disassemble the product.
• It is normal that the light flickers when the battery is close to running out.
• Don’t short circuit (+ ) and (-) terminals with metallic object intentionally.
• For long-term storage, please remove the battery.
• Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.
• Don’t use damaged, deformed battery, or with broken sleeve.

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.

Table 2

WARRANTY

Within 30 days of purchase : Contact the original seller for repair or replacement.
Within 5 years of purchase : Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

• USA Customer  Support
  cs@olightstore.com

• Global Customer Support
  contact@olightworld.com

• Visit www.olightworld.com to see our complete product line of portable illumination tools.

• Technia Co. L. Commerce

• 4th Floor, Building 4, Kegu Industrial Park, No. 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.

• Made in China

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>