KLUS A18031 LED Profile 1 Meter Instruction Manual
- May 15, 2024
- KLUS
Table of Contents
KLUS A18031 LED Profile 1 Meter
Specifications
-
KIDES Profile (Ref. A18031)
-
End cap KIDES (Ref. C28210A01)
-
End cap KIDESIN (Ref. C24152L01)
-
Plastic rod dia. 2.4 mm
-
LED tape*
-
Cover*
-
Gland*
-
Spacers
-
Mounting pad*
-
Power supply*
-
The full range of accessories and electronics is available at www.KlusDesign.eu
NOTE: All LED tapes must be connected to a 24V DC power supply.
IMPORTANT: Not all possible mounting procedures are presented here. More mounting procedures and related accessories can be found at www.KlusDesign.eu. Drawings in these instructions are simplified and only approximate the actual shapes.
Product Usage Instructions
Step 1: Assembly
- Start by assembling the KIDES Profile with the provided end caps, plastic rod, LED tape, cover, gland, spacers, and mounting pad.
- Refer to the manual for specific instructions on how to properly assemble each component.
Step 2: Power Connection
Connect the LED tape to the 24V DC power supply as indicated in the manual.
Ensure a secure connection to avoid any electrical issues.
Step 3: Mounting
- Choose a suitable location for mounting the assembled KIDES Profile.
- Refer to the provided mounting procedures on the website for detailed instructions on different mounting options.
Frequently Asked Questions (FAQ)
-
Q: Where can I find additional accessories and electronics for the KIDES Profile?
A: You can find the full range of accessories and electronics at www.KlusDesign.eu. -
Q: Can I use a power supply other than 24V DC for the LED tape?
A: No, it is important to connect all LED tapes to a 24V DC power supply for proper functionality and safety.
KIDES – mounting instructions
- KIDES Profile (Ref. A18031)
- End cap KIDES (Ref. C28210A01)
- End cap KIDESIN (Ref. C24152L01)
- Plastic rod dia. 2,4 mm
- LED tape*
- Cover*
- Gland*
- Spacers
- Mounting pad*
- Power supply*
Assembly
