ProClip 852808 Angled Dash Mount Instruction Manual
- September 5, 2024
- ProClip
Table of Contents
852808 Angled Dash Mount
“`html
Product Specifications
- Item No.: 852808 – ProClip Angled Mount
- Compatibility:
- Volkswagen Bora 1999 – 2005 (EU)
- Volkswagen Golf Variant 2000 – 2004 (EU)
- Volkswagen Golf (GTI) IV 1998 – 2003 (EU)
- Volkswagen Golf (GTI) IV 1999 – 2005 (US)
- Volkswagen Golf City 2005 – 2010 (US)
- Volkswagen Jetta 1999 – 2005 (US)
- Volkswagen Jetta City 2005 – 2010 (US)
- Volkswagen Jetta Wagon 2002 – 2005 (US)
Product Usage Instructions
-
Part Identification and Preparation:
-
Identify the two parts: Part 1 (attaching part) and Part 2
(ProClip faceplate). -
Use the enclosed gap openers to widen the gap between the
center console panel and edge. -
Peel off the adhesive tape cover on Part 1.
-
-
Mount Installation:
-
Position Part 1 with angled edge in the gap created by the gap
openers, aligning it as shown in the picture. -
Press the angled edge firmly into the gap, bending Part 1 to
hook behind the console edge panel. -
Press forward on Part 1 to attach it to the center console
panel. -
Remove the gap openers.
-
-
Confirmation:
- Ensure the ProClip Mount is securely in place.
FAQ
Q: What should I do before attaching anything to the mount face
plate?
A: Before attaching anything, make sure to install the mount to
the dashboard as per the provided instructions. Attaching items
beforehand can make installation challenging and may result in
non-refundable damage.
Q: Is there a warranty for this product?
A: The product comes with a limited warranty. For detailed
warranty information, please refer to the manufacturer’s website at
www.proclipusa.com/regulatory.html
“`
Item No. 852808 – ProClip Angled Mount
Compatible with:
Volkswagen Bora 1999 – 2005 (EU) | Volkswagen Golf Variant 2000 – 2004 (EU) |
Volkswagen Golf (GTI) IV 1998 – 2003 (EU) | Volkswagen Golf (GTI) IV 1999 –
2005 (US) | Volkswagen Golf City 2005 – 2010 (US) | Volkswagen Jetta 1999 –
2005 (US) | Volkswagen Jetta City 2005 – 2010 (US) | Volkswagen Jetta Wagon
2002 – 2005 (US)
View Color Instructions
Important:
Self-installation instructions and advice are provided for your convenience.
It is your responsibility to determine if you have the knowledge, skills, and
physical ability required to properly perform an installation. ProClip USA,
Inc. shall have no liability for damage or injury resulting from the
installation or use of any ProClip or third party products. It is your
responsibility to ensure that all products are installed in adherence with
local laws and regulations and in such a manner as to allow a vehicle to be
operated safely and without distraction. ProClip USA, Inc. product warranties
do not cover the installation, removal or re-installation of any product.
Attention: Carefully read all instructions and review the images before installing this product. Do not attach anything to the mount face plate until after installing the mount to the dashboard. Doing so makes it more difficult to install the mount to the dash and non-refundable since you have screwed into it.
1. This ProClip consists of two parts:Part 1: The attaching part (the smallest part). Part 2: The ProClip faceplate (the big part with holes). Press the thin end of the enclosed gap openers into the gap between the center console panel and the console edge, to widen the gap. Peel off the cover of the adhesive tape on Part 1. Place the angled edge on Part 1 in the exact same position as in the picture, in the same height, so the angled edge is into the gap between the gap openers.
2. Press the angled edge firmly into the gap and at the same time: bend Part 1 to the left so the angled edge hooks behind the console edge panel. Press forward on Part 1. so the adhesive tape attaches to the center console panel. Pull out the gap openers.
3. Press a screwdriver (Philips) firmly through the pre-drilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the left side. Screw Part 2 onto Part 1 using the enclosed screws. Right before you tighten the screws press the ProClip to the right with your thumb for optimal adjustment of the mount. Then press the adhesive tape on the left side of Part 2 to the center panel. Hold the ProClip in that position and tighten the screws.
4. The ProClip Mount is in place.
Returns
All returns must be made within thirty (30) days of the delivery date and
include proof of purchase, a copy of your original order, or invoice. No
products shipped hereunder may be returned without ProClip USA’s prior
approval. In order to return a product, the buyer must obtain an RMA number
(Return Merchandise Authorization Number). Items returned without a valid RMA
number may be rejected. Items that are open, used, damaged, or returned
without all original components may have a restocking fee applied.
Limited Warranty and Liabilities
ProClip warrants that the Products will be free of defects in materials and
workmanship for a period of one (1) year from the date of purchase. If any
Product should become defective within the warranty period, ProClip, at its
option, will replace it, repair it or refund the purchase price. Repair or
replacement parts or Products will be furnished on an exchange basis and will
either be new or reconditioned. All replaced Products shall become the
property of ProClip. Warranty service is available to you by delivering the
Product during the warranty period to the company it was purchased from or to
ProClip at 4915 Voges Rd., Madison, WI 53718 USA and providing proof of
purchase, price and date. If shipped to ProClip, the buyer must first call
ProClip at +1 800-296-3212 or e-mail
ProClip at returns@proclipusa.com to obtain a return approval and return
number. You will bear all shipping, packaging and insurance costs and all
other costs, excluding labor and parts, necessary to effectuate repair,
replacement or refund under this warranty. For more information on how to
obtain warranty service, write, e-mail or telephone ProClip at 4915 Voges Rd.,
Madison, WI 53718 USA.Tel: +1
800-296-3212, e-mail:
returns@proclipusa.com. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT
WHICH HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE OR AS A RESULT
OF UNAUTHORIZED SERVICE. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
WARRANTIES FOR THIS PRODUCT. IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL
HAVE NO GREATER DURATION THAN 1 YEAR FROM THE DATE OF PURCHASE. IN THE EVENT
THIS PRODUCT BECOMES DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER’S
EXCLUSIVE REMEDY SHALL BE REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE. IN
NO EVENT SHALL PROCLIP BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING WITHOUT LIMITATION LOSS OF PROPERTY, ARISING FROM BREACH OF ANY
EXPRESSED OR IMPLIED WARRANTY. PROCLIP DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, OTHER THAN THOSE SET FORTH ABOVE. IN NO EVENT WILL PROCLIP BE LIABLE
TO YOU OR ANY THIRD PARTY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING, WITHOUT LIMITATION, INDIRECT, SPECIAL, PUNITIVE, OR EXEMPLARY
DAMAGES, INCLUDING ATTORNEY FEES ARISING OUT OF THE USE OF OR THE INABILITY TO
USE THE PRODUCTS, OR FOR ANY CLAIM BY ANY OTHER PARTY, EVEN IF PROCLIP HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Regulatory information: www.proclipusa.com/regulatory.html
ProClip USA, LLC · 4915 Voges Road · Madison, WI 53718 · USA Office: +1
608-807-5320 · Fax: +1
920-372-0066 · Toll free:
800-296-3212 · Internet:
www.proclipusa.com
References
- usa.tel
- Custom Car Phone Holders & Dashboard Mounts for Phones | ProClip USA
- Regulatory Information | ProClip USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>