ProClip Zebra TC57 Active Holder Instruction Manual
- June 4, 2024
- ProClip
Table of Contents
ProClip Zebra TC57 Active Holder
Important:
Self-installation instructions and advice are provided for your convenience.
It is your responsibility to determine if you have the knowledge, skills, and
physical ability required to properly perform an installation. ProClip USA,
LLC. shall have no liability for damage or injury resulting from the
installation or use of any ProClip or third party products. It is your
responsibility to ensure that all products are installed in adherence to local
laws and regulations and in such a manner as to allow a vehicle to be operated
safely and without distraction. ProClip USA, LLC. product warranties do not
cover the installation, removal, or re-installation of any product.
- Power Rating: Input Voltage: 10-30 VDC, 1.1A / Output Voltage: 5 VDC, 2A.
- Wiring: Follow the diagram below. Route the wire from the holder behind the dashboard and connect it to a power source; White or Black to ground or the vehicle chassis, and Red via the 2A in-line fuse to a positive power source. Professional installation is recommended.
- Attention: Carefully read all instructions and review the images before installing this product
INSTALLATION
- Unscrew the screw in the center of the holder and remove the holder from the Tilt Swivel base plate.
- Place the Tilt Swivel base plate over the matching holes in your mounting bracket (demo ProClip mount shown in picture). Attach the base plate by using the applicable screws enclosed – self-tapping screws if the mount has small holes or machine screws with nuts if the mount has larger holes.
- To insert the device into the holder: Slide the device down into the holder. To remove the device from the holder: Press upwards on the top support to release and slide the device up and out.
- . The holder in place. For wiring and connecting to a power source, please follow the diagram further up on this page.
Returns
All returns must be made within thirty (30) days of the delivery date and
include proof of purchase, a copy of your original order, or an invoice. No
products shipped hereunder may be returned without ProClip
USA’s prior approval. In order to return a product, the buyer must obtain an
RMA number (Return Merchandise Authorization Number). Items returned without a
valid RMA number may be rejected. Items that are open, used, damaged, or
returned without all original components may have a restocking fee applied.
Limited Warranty and Liabilities
ProClip warrants that the Products will be free of defects in materials and
workmanship for a period of one (1) year from the date of purchase. If any
Product should become defective within the warranty period, ProClip, at its
option, will replace it, repair it or refund the purchase price. Repair or
replacement parts or Products will be furnished on an exchange basis and will
either be new or reconditioned. All replaced Products shall become the
property of ProClip. Warranty service is available to you by delivering the
Product during the warranty period to the company it was purchased from or to
ProClip at 4915 Voges Rd., Madison, WI 53718 USA and providing proof of
purchase, price, and date. If shipped to ProClip, the buyer must first call
ProClip at +1 800-296-3212 or e-mail
ProClip at returns@proclipusa.com to obtain a return
approval and return number. You will bear all shipping, packaging, and
insurance costs and all other costs, excluding labor and parts, necessary to
effectuate repair, replacement, or refund under this warranty. For more
information on how to obtain warranty service, write an e-mail, or telephone
ProClip at 4915 Voges Rd., Madison, WI 53718 USA.Tel: +1
800-296-3212, e-mail:
returns@proclipusa.com.
THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS BEEN DAMAGED AS
A RESULT OF ACCIDENT, MISUSE, ABUSE, OR AS A RESULT OF UNAUTHORIZED SERVICE.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES FOR THIS PRODUCT.
IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT SHALL HAVE NO GREATER DURATION THAN 1
YEAR FROM THE DATE OF PURCHASE. IN THE EVENT THIS PRODUCT BECOMES DEFECTIVE
DURING THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE REMEDY SHALL BE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED ABOVE. IN NO EVENT SHALL PRO CLIP BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OF
PROPERTY, ARISING FROM BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY. PROCLIP
DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE SET FORTH
ABOVE. IN NO EVENT WILL PRO CLIP BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, INDIRECT,
SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES, INCLUDING ATTORNEY FEES ARISING OUT
OF THE USE OF OR THE INABILITY TO USE THE PRODUCTS, OR FOR ANY CLAIM BY ANY
OTHER PARTY, EVEN IF PROCLIP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Regulatory information:
www.proclipusa.com/regulatory.html
ProClip USA, LLC • 4915 Voges Road • Madison, WI 53718 • USA
Office: +1 608-807-5320 • Fax:
+1 920-372-0066 • Toll free:
800-296-3212 • Internet:
www.proclipusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>