ProClip 512959 Top Support Charging Holder Instruction Manual
- June 4, 2024
- ProClip
Table of Contents
ProClip 512959 Top Support Charging Holder
Important :
Self-installation instructions and advice are provided for your convenience.
It is your responsibility to determine if you have the knowledge, skills, and
physical ability required to properly perform an installation. ProClip USA,
LLC. shall have no liability for damage or injury resulting from the
installation or use of any ProClip or third party products. It is your
responsibility to ensure that all products are installed in adherence with
local laws and regulations and in such a manner as to allow a vehicle to be
operated safely and without distraction. ProClip USA, LLC. product warranties
do not cover the installation, removal or re-installation of any product.
Power Rating
- Input Voltage : 10-30 VDC, 1A
- Output Voltage : 5 VDC, 2A
It is recommended to connect the cigarette lighter plug to a cigarette lighter receptacle near the holder so it is easily accessible in case the holder needs to be disconnected from the main power supply.
Attention:
Carefully read all instructions and review the images before installing this
product.
INSTALLATION INSTRUCTIONS
-
Unscrew the screw in the center of the holder and remove the holder from the Tilt Swivel base plate.
-
Place the Tilt Swivel base plate over the matching holes in your mounting bracket (demo ProClip mount shown in picture). Attach the base plate by using the applicable screws enclosed.
Place the holder onto the Tilt Swivel base plate and attach it with the center screw. Adjust the holder to the preferred position and tighten the screw firmly. Then loosen the screw slightly for easier angling and /rotation of the holder. -
To insert the device into the holder: Slide the device down into the holder.
To remove the device from the holder: Press upwards on the top support to release and slide the device up and out. -
The holder in place.
Returns
All returns must be made within thirty (30) days of the delivery date and include proof of purchase, a copy of your original order, or invoice. No products shipped hereunder may be returned without ProClip USA’s prior approval. In order to return a product, the buyer must obtain an RMA number (Return Merchandise Authorization Number). Items returned without a valid RMA number may be rejected. Items that are open, used, damaged, or returned without all original components may have a restocking fee applied.
Limited Warranty and Liabilities
ProClip warrants that the Products will be free of defects in materials and workmanship for a period of one (1) year from the date of purchase. If any Product should become defective within the warranty period, ProClip, at its option, will replace it, repair it or refund the purchase price. Repair or replacement parts or Products will be furnished on an exchange basis and will either be new or reconditioned. All replaced Products shall become the property of ProClip. Warranty service is available to you by delivering the Product during the warranty period to the company it was purchased from or to ProClip at 4915 Voges Rd., Madison, WI 53718 USA and providing proof of purchase, price and date. If shipped to ProClip, the buyer must first call ProClip at +1 800-296-3212 or e-mail ProClip at [email protected] to obtain a return approval and return number. You will bear all shipping, packaging and insurance costs and all other costs, excluding labor and parts, necessary to effectuate repair, replacement or refund under this warranty. For more information on how to obtain warranty service, write, e-mail or telephone ProClip at 4915 Voges Rd., Madison, WI 53718 USA.Tel: +1 800-296-3212, e-mail: [email protected].
THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE OR AS A RESULT OF UNAUTHORIZED SERVICE. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES FOR THIS PRODUCT. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL HAVE NO GREATER DURATION THAN 1 YEAR FROM THE DATE OF PURCHASE. IN THE EVENT THIS PRODUCT BECOMES DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE REMEDY SHALL BE REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE.
IN NO EVENT SHALL PROCLIP BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING WITHOUT LIMITATION LOSS OF PROPERTY, ARISING FROM BREACH OF ANY
EXPRESSED OR IMPLIED WARRANTY. PROCLIP DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, OTHER THAN THOSE SET FORTH ABOVE. IN NO EVENT WILL PROCLIP BE LIABLE
TO YOU OR ANY THIRD PARTY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING, WITHOUT LIMITATION, INDIRECT, SPECIAL, PUNITIVE, OR EXEMPLARY
DAMAGES, INCLUDING ATTORNEY FEES ARISING OUT OF THE USE OF OR THE INABILITY TO
USE THE PRODUCTS, OR FOR ANY CLAIM BY ANY OTHER PARTY, EVEN IF PROCLIP HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Regulatory information: www.proclipusa.com/regulatory.html
References
- usa.tel
- Custom Car Phone Holders & Dashboard Mounts for Phones | ProClip USA
- Regulatory Information | ProClip USA